does it have software who can transfer files between two PPC using fast WiFi connection?

i tried with resco explorer but i can see only the other device it is impossible to enter .

[infernal]

first create a wifi connection as below:

Device #1
● open WLAN utility, turn Wifi on.
● tap on Setting button.
● under Networks to Access select only computer-to-computer
● Click add new...
● Network Name: Adhoc11 (or you can use anything you like)
● Connects to: Work (Internet works too)
● put a check mark on the This is a device-to-device(ad-hoc) connection check box

● Go to Network Key tab
● Authentication: Open (default value)
● Data Encryption: WEP (default value)
● if the The key is automatically provided is checked, uncheck it
● Network key: enter a valid network key
● Key Index: 1 (default value)

Note: you can also use Data Encryption: disabled to make it easier.

Device #2
copy the exact settings from Device #1 including the Network Name

Note:
1. you may need to turn wifi off and turn it on again to enable scanning.
2. it takes a little time for it to find each other so be patient.
3. if you are going to access your router again, remember to select Only access points on your Networks to access drop down box, hold and tap on your SSID and connect.

now use an FTP server like PE Ftp Server v1.9 to browse the contents of your PocketPC from another PocketPC.

HTH

Thanks I`ll try.

Ok, thank you very much it work`s perfectly!!!

[infernal]

glad to hear that.

first create a wifi connection as below:

Device #1
now use an FTP server like PE Ftp Server v1.9 to browse the contents of your PocketPC from another PocketPC.

HTH

did this work with wi-fi network? I have wi-fi network Desktop PC - notebook PC and wi-fi router. Can access network, but only for browse Internet.