OziExplorerCE 2.31 + OziExplorerCE Development 2.30d3
Requirements: Pocket PC with WM 2003 SE, 5.0, 6.0, 6.1
Overview: OziExplorerCE is moving map software for PocketPC's and Window CE PDA's which use the WinCE core operating system. It uses raster map images which are either scanned or purchased in digital format. It allows you to track your position received from a GPS on a map (moving map)



OziExplorerCE is moving map software for PocketPC's and Window CE PDA's which use the WinCE core operating system. It uses raster map images which are either scanned or purchased in digital format. It allows you to track your position received from a GPS on a map (moving map).


Features
Moving map navigation using any GPS providing NMEA output in one of the supported sentences.
OziExplorerCE will allow you to create your own routes on the map and navigate along those routes.

The design philosophy is you plan your trip using the full PC OziExplorer on you PC and then transfer your waypoints and other data to your PDA for use by OziExplorerCE.

Maps
Works with maps world wide, obtain digital maps for your region of interest in one of the many supported image formats or if you scan your own, you can use PC OziExplorer to calibrate them for use in OziExplorerCE.

OziExplorerCE uses a special image format which provides faster loading and better zooms, an image conversion utility is provided with OziExplorerCE. Maps in ECW format can also be used without conversion.

Maps in BSB4, BSB5 and Kompass format can be converted for use in OziExplorerCE.
GPS

For real time navigation almost any GPS receiver with NMEA 0183 output (most output the required GPRMC or GGA or GLL sentence). These include built-in GPS or an external GPS connected to the CE Device serial port, a compact flash GPS plugged into a compact flash slot, a SDIO GPS, a Bluetooth GPS or a Navman GPS sleeve (for iPaqs).

Waypoints and Tracks
Sets of waypoints (up to 10,000 waypoints) can be loaded from waypoint files (also supports .ov2, .loc and .gpx formats). Waypoints and tracks can be automatically logged to file storage.

Configurable Options -Multi Screen Support
Using our "Screen Designer" software on your PC, design your own screens (up to 20 screens) with the parameters you want. Select from a list of more than 100 parameters and buttons. Screen designs to suit many applications, moving map, navigation, geocaching, satellite, compass, altitude and track profiles etc.

These comprehensive configuration options allow you to set up OziExplorerCE to work and feel the way you like it.
The log book feature is fully configurable to automatically make log book entries when the configured conditions are met.
Ability to program the hardware buttons (Pocket PC's only).
Support for PDA's with high resolution VGA displays.

Loads of information can be displayed on-screen; use the standard screens or design your own.
By pressing screen buttons, the on screen information can be hidden to display the map full screen, this allows you to see more of your map.

Configuration options allow you to set your own track tail color and width, also you can select from various position icons and set the size and color.

Automatic loading of the next map and check for more detailed map at a set interval.

A new map will be searched for when you leave the current map. The most detailed map will be selected. If activated in configuration a more detailed map will be searched for at a user defined interval even if you are still on the current map.

Automatic Route prompting (voice and symbol).
This is not auto-routing, you must define the route manually using the Route Create toolbar.

With auto-prompting, OziExplorerCE will automatically tell you to turn right and left and so on as each route waypoint is approached.

OziExplorerCE works out the turn angle and direction itself and selects the appropriate symbol (.bmp) and sound file to play (.wav).

The symbol is automatically displayed (when in "Land" mode) and the wav file is automatically played.

The distance from the approaching route waypoint (when in "Land" mode) or the Course to Steer to the next waypoint (when in "Marine" or "Air" mode) is also played using voice prompts.


Types of Map Objects recognised by OziExplorerCE
Waypoints, Routes and Tracks can be created directly on the screen using the stylus. Map Comments and Map Features which have been created in PC OziExplorer and saved with the map can be displayed.
Waypoints
Routes
Tracks
Map Comments
Map Features

Various Toolbars for easy operation
Several toolbars are available to be turned on to assist to make operations easy for the user. There is a main toolbar with many frequently used functions, as well as specific toolbars for Waypoints, Tracks, Route Create and Route Navigation. The toolbars can be easily hidden by pressing on the X button on the toolbar.

The Route Create toolbar.
Screen prompts are shown where necessaryduring toolbar operations.

Create a Route on screen.
Plan your desired path and use a special route create toolbar to easily create a route by adding, inserting or removing route waypoints, edit properties. Simply activate the add button on the toolbar and click on the map at the desired positions to add a route waypoint. You can also move a route waypoint forward or backwards in the route. Waypoints can be dragged on the map using the stylus.

During navigation, voice and symbol prompts are activated. If you give a waypoints a silent property, no prompts are activated when approaching it, useful for setting up turn angles but the silent waypoint is not used for navigation.

Routes can be saved to files and reloaded.
Tracks can be created on the map using the stylus - 5 user tracks can be created or loaded from a file

Up to 5 Tracks can be created in OziExplorerCE or tracks from the full PC OziExplorer can be loaded. Tracks created in OziExplorerCE can be loaded by PC OziExplorer. Each track has its own properties of color and track width in pixels.

Points on the Active track are shown with white dots
The Track Toolbar is used to easily create user tracks, any of the five tracks can be made active and can be easily manipulated on the screen.

All tracks can be modified and saved, track points can be added or inserted by clicking at the map position when either the add or insert Track Toolbar button is activated.

Track points can be dragged to a new position on the screen.
Press on an active track point to display the coordinates of the track point position.

A popup menu can be activated by a simple press and hold on an active track point for 1 second. The menu has options such as Create Waypoint at track point and split / join track section.
A Track List shows information about each track of the 5 tracks including total track distance.

Logging of Track points to file and display of track on screen
When in moving map mode (real time tracking), Track Logging can be turned on so the track can be automatically logged to a file. The track is also logged into memory and displayed on the map as a track tail (up to 1000 points are kept in memory).
Use the memory log to view the recent track history.
The memory log can be saved to a file for permanent storage.
Saved files can be reloaded into one of 5 available tracks.
Tracks created in OziExplorer for PC's can be loaded into OziExplorerCE.

Replay of stored tracks

OziExplorerCE has a "Replay Track" option. For example if you have saved one of the tracks collected during a trip, you can load the track and replay (travel) along the track. The track will be replayed using the same configuration settings used for normal moving map operations.
The CE track replay option can also be used track files produced by PC OziExplorer.

Load and display Waypoints on the map or create a Waypoint at current position or any other position using the stylus.
There are several ways to display waypoints on a map.
Load waypoints from a saved file
Using the Waypoint toolbar, add waypoints by tapping on the map with the stylus at any position
Load waypoint files saved by PC OziExplorer
A "Screen Control" feature can be used to quickly add a waypoint at the current position, just press on the centre of the screen.

Other features of waypoints -
The name and description of a waypoint can be edited. To view information about a waypoint, press and hold on the waypoint, the waypoint name, date and time and latitude and longitude will pop up on the screen.
Waypoint names can be displayed adjacent to the waypoint.
Waypoint can be dragged to a new position using the "drag" feature.
Waypoint files created by OziExplorerCE can be loaded by PC OziExplorer.

Press and hold on a waypoint for a popup menu to Edit, Delete, GoTo (turn on navigation to the waypoint) or add the waypoint to a route.

Auto logging option can be activated so any waypoints added can be automatically logged (saved) to a file.
Drag Map Objects to new position

Waypoints, route waypoints and active track points can be moved to a new position when the Drag Objects button on the main toolbar is active (pressed). Simply press on the object with the stylus and drag it to the new position.

Hold stylus on Map Objects to get information about them or to get a popup menu of options

Waypoint
Popup Menu
Popup Information - Press and hold the stylus on the map or any map object (waypoint, route waypoint or active track point) until a red circle appears (approximately 0.5 seconds), release the stylus to show a window with information about the map or map object.

Popup Menu - Press and hold the stylus on the map or any map object (waypoint, route waypoint or active track point) for at least 1 second to show a popup menu with several menu options. The map popup menu has zoom selections, Full Map or 100% Zoom. Map Object popup menus are different for each object type.

Many Map Zoom levels
Zoom buttons can be added to any screen, the map can be zoomed by clicking on the magnifying glass buttons or selecting a zoom option on the view menu. Zoom up and down can also be added to the PDA buttons on a Pocket PC. Configure the zoom levels above 40% that you require in Configuration. Zoom levels below 40% are always available.
The zoom full option will select a zoom level so the complete map just roughly fills the screen.
A 100% zoom level is also available so you can quickly return to normal zoom.

Scale on Map
Display a scale on the map, the scale automatically adjusts when the map is zoomed in or out.

Various Position display formats

Selectable position display formats such as Degrees and Minutes, Degrees Minutes Seconds, and grids such as UTM, BNG and many more.

Current position is shown in the selected format.
On screen display of parameters

Standard screens are provided or select from more than 100 parameters such as Speed, Heading, Altitude and many more. Use the screen designer to change the "look and feel" of the screens by selecting the parameters to display and also many additional properties such as font size, color, transparent, translucent etc.

For example, during moving map operation the speed, bearing and altitude can be displayed. Using the screen designer, parameters can be added or removed from the screen or additional screens can be designed.

Parameters can also be added / removed from screens.
Select from a list of more than 100 parameters and buttons.

Some examples of various parameter displays. Use the screen designer to change a parameter or the size, color, look (transparent / translucent) etc.
The Compass parameter can be sized to suit. (up to full screen size) using the screen designer.
Speed Monitor (plays sounds (wav files) when set speeds exceeded).

If selected, the speed monitor will play wav files when the speed thresholds are crossed. If the wav files are not found the standard beeps are used.

Min Speed - played when the speed goes below the specified minimum speed.
Set Speed - played when your speed goes above the specified set speed.
Max Speed - played when your speed goes above the specified max speed.
The three speeds can be activated independently of each other.

Find Maps at cursor position
Map search routines are built-in, simply press the "Find Map at Cursor" option and OziExplorerCE will scan the folder where the current Map was loaded from and configurable Map File Paths and find all the maps which will have the current cursor position contained within them.

During real time tracking, these paths are automatically searched for maps.
Uses and writes files in the same formats as the full PC based OziExplorer
Data files are in the same format so files saved in OziExplorerCE can be loaded into the PC based OziExplorer.

Name Search
Satellite View and NMEA Data
The PC OziExplorer and OziExplorerCE name search databases are identical and databases created for PC OziExplorer can be used.
A utility is provided so you can make your own databases for most countries from data which is available from the internet.
One of the screens available is the Satellite View. If your GPS is connected and outputs the GSV NMEA sentences, a graphical display will show the satellites your GPS has connected with.
To assist you to check the NMEA output from the GPS, another parameter is provided to view the NMEA sentences being received from the GPS.

Map View
Map View is a small window on top of the main map window which displays the full map. Features of the Map View are -
The Map View can be turned on/off from the View Menu or by pressing the Map View button on the Main Toolbar.
Clicking on the Map View map will scroll the main map to the same position.
Click on the colored border around the map to display a list of the available maps at that position.
The Map View window can be resized to suit your requirements.
Waypoints, Map Features and Map Comments can be displayed on the Map View window.
Small map view window showing the full map which can overlay the main map window.

Nearest Waypoint List
When navigating, the nearest Waypoint List shows the waypoints that you are getting closer to in green and the waypoints you are going away from in white. The waypoint being navigated to is highlighted red.

Screen Control
A special feature available in OziExplorerCE is "Screen Control".
So it is easier for the operator to control the software in a tricky environment the screen itself (the map area) has been divided into a grid of 9 zones on 1 or more pages, each zone acts as a button which can be pressed by the finger for instant action.
The top left button will show / hide the overlay shown in the picture to help you see the zones and the operations they perform.
For example : if you want to place a waypoint on the map at the current position, simply press the centre of the screen.

Log Book
A fully configurable logbook function can automatically log position, date/time, and other parameters when the configured conditions such as elapsed time, distance, heading and speed change are met. A snapshot of a small portion of the map can also be taken and added to the log entry. Manual Log Book entries can be made.


More Info:

Code: Select allhttp://www.oziexplorer3.com/ozice/features/features_ce.html

Download Instructions:
http://rapidshare.de/files/46859138/Zeno-Ozi.rar.html

Mirrors:
http://www.megaupload.com/?d=VX9WQ4PU
http://www.mediafire.com/?sharekey=6508 ... 49b5870170
Password=Zeno_PPCWarez

[squawksarah]

Thanks Zeno!

Surely the 2.31 should be the dev version, rather than 2.30? Slightly confused (nothing new there)

[maxkonrad]

Would be useful to know what has been changed since 2.19...

OziExplorerCE History

Release Version 2.31 (April 2009)
Changes
* Added the ability to sort the waypoint list by Name or Distance from present position.

Development Version 2.30d.1/2.30d.2/2.30d.3 (April 2009)
Changes
* 2.30d.3 - added new parameters to the screen designer
o Display Total storage space for the main storage partition (file space).
o Display Free storage space for the main storage partition.
o Display Total storage space for the partition where OziExplorerCE is installed.
o Display Free storage space for the partition where OziExplorerCE is installed.
o Display Total storage for partition where the Datapath folder is located.
o Display Free storage for partition where the Datapath folder is located.
o Use a Button to execute an external program (located at the bottom of the parameter list in "Other Command") - limited to 50 characters - include full path to exe file, parameters are ok.
* 2.30d.3 - fixed logbook image creation when in perspective 3D mode.
* 2.30d.3 - fixed issue with nearest waypoint list when selecting waypoints on blank entry and clicking on the "Map" or "Goto" button.
* 2.30d.3 - fixed issue where incorrect waypoint could be selected in a route if gps did not have a valid fix when route navigation is started.
* 2.30d.2 - added mapview for png, jpg and bmp map image types.
* If you have 10,000 waypoints loaded the calculation of nearest waypoints can take 500 - 700 milliseconds and this must be done every time the position changes (only when the nearest waypoint list is on the page of course). A new method has been developed which reduces this to about 50 milliseconds for most screen updates with a full update only needed occasionally.
* jpg, png and bmp image files can now be used as map images. Only 8bit and 24bit color formats are supported. The images must be small as they must be fully loaded into memory. This is experimental at this stage.
* Fixed an unusual issue with closing OziCE on some devices (OziCE may hang or the desktop not refresh after closing).
* When resuming the pda from suspend mode the "GPS disconnected message" may display when not necessary, the check for NMEA data is now delayed.
* Fixed some other issues.

Development Version 2.29d/2.29d.1/2.29d.2/2.29d.3/2.29d.4 (March 2009)
Changes
* 2.29d.4 - Changes done to screen redraw thread methodology.
* 2.29d.4 - Removed bugs which caused almost 100% cpu load under certain circumstances.
* 2.29d.4 - Please test previous problems with 2.29d.2/2.29d.3 with this version too see if they still exist.
* 2.29d.4 - When the OziCE application is put in the background it will now do the following to reduce its resource use.
o Screen redraw is suspended (track logging and so on still occurs).
o The memory for cached parameter fields for all but the current page is released.
o If an ECW map image is loaded it is closed (automatically reopened when needed) - ECW is by far the biggest memory user needing about 14MBytes.
* 2.29d.4 - ipaq 312/314 users
o "parkinson" also exists on other pnd's and I have previously adjusted the mousemove threshold in OziCE up to eliminate the affect, the 312/314 seems to be worse.
o The threshold is currently set to 8 pixels (or 16 if using hires.dat) - what should the threshold be???
o The unlock slider reappearing - OziCE will show the slider on a mousedown or mousemove event, the mousemove event isn't really needed so I have removed it, not sure if this will help.
* 2.29d.3 - Screen draw function using a separate thread has been reinstated.
o the known issues with this have been fixed.
o there may be other issues so please report anything unusual.
* 2.29d.3 - some minor cosmetic issues have been fixed.
* 2.29d.2 - Removed screen draw function from separate thread back to the old method, it was causing a few issues.
* 2.29d.1 - Fixed problem where map would not respond to gps position change after selecting goto from popup menu.
* 2.29d.1 - Fixed problem where map would not refresh to gps position when changing maps.
* 2.29d.1 - When editing waypoints which have a non-standard color (a PC OziExplorer color for example) the color will be specified as "custom". The waypoint can be edited (the name for example) and saved without destroying the waypoint color.
* 2.29d.1 - When OziExplorerCE is locked the Unlock slider now disappears after 10 seconds, a press on the screen will bring it back (for 10 seconds). The unlock slider is no longer a modal window so pressing on the screen does not generate the annoying beep.
* 2.29d.1 - Added the ability to split the track log file into different file names based on the following options - daily, weekly, monthly and never.
o The New Track Log File option is specified in Track configuration.
o The Menu options Copy Track Log File and Delete Track Log File apply to the track log file name currently being used.
o If the New Track Log File option Never is selected then the track log is stored in the ceTrack.plt file.
o The default is Daily.
* 2.29d.1 - Added a % CPU load parameter to the version 2.29 Screen Designer, this gives the total cpu load of the device (not just the load generated by OziExplorerCE).
* Put screen redraw function into separate thread
o This is the biggest change for this version and has potential to cause other issues (none noticed in testing).
o It allows the gps reading thread to continue while the screen is being redrawn.
o Also allows finer control so time is always allocated for other functions when screen redraw is slow.
* Tidying up of some screen handling issues when stopping moving map or gps tracking.
* Fixed issue with gps port reading (broken in previous version) causing lag in some systems.
* Added a button for turning on/off NMEA sentence Logging to the Screen Designer.
* If NMEA Logging is active a message is displayed when the GPS is first connected.
* Other minor cosmetic changes.

Development Version 2.28d/2.28d.1 (March 2009)
Changes
* 2.28d.1 - Changes have been made to the use of the internal keyboard.
o This information does not apply to Pocket PC's (which always have a keyboard).
o The parameter to specify the use of the internal keyboard in configuration has been removed.
o The first time the keyboard is used the windows system keyboard will be activated and you will be asked if you can see the keyboard.
o If the keyboard is not visible the internal keyboard will be activated.
o The keyboard configuration is stored in the file keyboard.cfg - delete this file and you will be asked again if you can see a keyboard.
o Checks are made to see if the PND has a keyboard - in some cases it can be determined that the PND definitely does not have a keyboard and in these cases the internal keyboard is used by default (no question is asked).
o However it is difficult to determine programmatically if a PND has a keyboard or not, there are so many variations to what is configured in the operating system. In some cases the API functions for using the keyboard or checking if it available are not included in the system dll's.
* 2.28d.1 - Minor cosmetic fixes have been made.
* 2.28d.1 - Fixed proximity alert for 375 and 500 meters which were not being set correctly.
* Fixed the zooming of ecw maps when in 3D perspective mode.
* The waypoint color can now be changed in the Waypoint editing dialog.
* The default color used when creating waypoints can now be specified in the Waypoints configuration dialog.
* The display of total route distance now displays when using a reversed route.
* Added new waypoint alert distances for 375 and 500 meters (on Waypoint set List).
* The proximity distance of an individual waypoint can now be changed in the waypoint editing dialog (set in meters).
* The wp_alert.wav file is played when the proximity is entered and the waypoint is changed to an alert symbol on screen until the proximity is left.
* Course up and 3D perspective modes now use a fixed position for the GPS position about 3/4 of the way down the screen (this gives look ahead). This was done so the "Screen Position" setting in configuration (now called "Look Ahead") can now be set to zero when it is not required for a particular activity (such as hiking).
* The nmea log file is now stored in the "Data Path" (if activated), it used to be stored with the exe file where file space may be limited.

Development Version 2.26d/2.27d (February 2009)
Changes
* 2.27d - fixed slow page changing when gps connected.
* New GPS connection options have been added for the GPS. The options are available on the Connect tab on the NMEA (GPS) configuration dialog. The options are:
o Close the GPS port when the PDA is turned off - this may reduce battery use if the serial port is not active when suspended.
o Reopen the GPS port when the PDA is turned on (if it was on when the PDA was suspended).
o To reconnect to the GPS if the connection is lost when it is in use.
* Incorrect magenta backgrounds on gauges fixed.
* Red shift night vision now now shifts 75% to the red instead of 100% - this allows for better differentiation of colors on the screen when they are shifted to red.
* New buttons added to the screen designer for "Screen Brightness + red shift".
* Added buttons to move the active page back 1,2,3,4 or 5 pages.
* A program called NoniMapView which can make OziExplorer maps from Google Earth does not write out the .map file correctly, it leaves out the calibration points which are not used, however OziExplorerCE expected those points to be included in the .map file. This results in the corner markers and map scale parameters not being loaded when NoniMapView created maps are used. OziExplorerCE has been modified to load .map files which do not have the unused calibration points and these map files now load ok.
* For people using the hires.dat file option for high resolution devices and using a language other than English - a fix has been done so the dialogs will display the full text for labels and not truncate them.
* The saved map image for the log book should now center around the gps position.
* A new menu option has been added for the 3D view to turn it on/off.
* The anchor_alarm.wav file not being used has been fixed.
* A simple software keyboard has been added. It will be used if OziExplorerCE detects the OS does not have a software keyboard installed.

Development Version 2.25d (January 2009)
Changes
* Magenta backgrounds on parameters should now be fixed.
* Fixed Anchor alarm +50 button only doing +10.

Development Version 2.24d (January 2009)
Changes
* Red night vision is now available
o Added button to Screen Designer version 2.24 to activate red night vision.
o The button will need to be added manually to an OziExplorerCE screen if you want to use it.
o The Red shift works with the intensity and will only happen at intensities less than 100%.
* The anchor alarm circles will only be drawn on the map if the anchor alarm is active.
* Made code changes to try and prevent transparent buttons from showing with a magenta background under some circumstances. This only happens on a few devices and I do not know the cause as I cannot duplicate it.
* If you do not want the gps to be automatically reconnected if the NMEA data stream is lost then put a file called "no_port_reconnect.dat" in the folder with OziExplorerCE. When OziExplorerCE is started it will detect the presence of this file - OziExplorerCE will then only alert the fact that NMEA has been lost but will not attempt to reconnect the gps.

Development Version 2.23d (December 2008)
Changes
* This version should be more stable than version 2.22
* Added 3D perspective view - this rotates the top of the map down using a true perspective view and provides for more map view ahead.
o This is just a display feature, the map cannot be manipulated in this mode.
o For the 3D perspective to be displayed the gps must be connected and tracking, OziExplorerCE must be in "Course Up" mode and the zoom level greater than 70%.
o The options for this are on the View / Map Display menu and buttons are available in the Screen Designer.
o 3 look ahead modes are provided 1.5, 1.75 and 2, The larger the look ahead more resources are need to render the image.
o The page files provided for download have a 3D button added to page 1.
* Added analogue gauges - most parameters can be displayed as either a digital read out (normal) or as an analogue gauge.
o Version 2.23 of the Screen Designer can design analogue gauges.
o The page files provided for download have a page showing some example analogue gauges.
* Faster map indexing - at least 10 times faster when tested on my PDA's.
* Faster startup - OziExplorerCE loads up quicker.
* Faster track loading from file.
* Faster route loading from file.
* Faster screen rotation - when changing from landscape to portrait mode or back again OziExplorerCE changes much quicker.
* Fixed gps connection issues with Samsung Omnia i900 - now works very well with this phone/pda.
* The last route used is now loaded from file (assuming it was saved to a file) - the setting for this is in "General Settings" configuration.
* Fixed bug in loading of large waypoint files.
* The double click time when double clicking on waypoints (and other objects) to open the menu has been extended to 0.3 seconds (from 0.2 seconds) - you don't have to click so fast.
* Anchor alarm components have been added - these are not included on the standard screens but can be added using the Screen Designer.
o The anchor alarm units are only set in meters at this stage.
o The anchor alarm position and zone are drawn on the map.
o The alarm is sounded by playing the sound file "Anchor_Alarm.wav" (not supplied) (or default.wav if it does not exist).
* New Screen Designer (version 2.23) is available.

Development Version 2.22d (November 2008)
Changes
* Fixed problem with map searching only working on the 1st map file path.
* The "back" button on the help viewer will now exit back to the map if you are at the top help level.

Development Version 2.21d (November 2008)
Changes
* Fixed problem with help locking up
* Fixed problem with log book images not being created
* Fixed problem with map having 1 or 2 rows of pixels missing along the edge of the map.
* Fixed problem where map images with international characters would not be found. However you are still required to have your PDA configured to the regional settings for the language being used for the map files.
* Map Searching now will also look into the sub-folders of the configured "Map File Paths", this will provide for better organisation of maps into different sub-folders for any of the "Map File Paths".
o As an example - it would now possible to set a "Map File Path" to the root of an SD card (\SD Card) and OziExplorerCE will scan the full SD Card for maps. However setting the path to the root of an SD Card is not recommended as map searching performance will suffer as all folders need to be scanned, even those without maps in them.
o For best performance "Map File Paths" should contain sub-folders with only maps (and map images) in them.
o Setting the "Map File Path" to the root of the PDA (\) will not work, it will be ignored.
* Another experiment with opening the context menu for waypoints, route waypoints and track points.
o A very quick double click on a waypoint will open the menu
o A single click on a waypoint will move the map (same as version 2.19)
o Holding the stylus on the waypoint for longer than 1 second will also open the menu (same as version 2.19)
* Fixed other minor problems.

Development Version 2.20d (November 2008)
Changes
* OziExplorerCE can now rotate the map to "Course Up" when in moving map.
o There is an option on the View menu for "Course Up".
o Direction of travel will be within roughly 45 degrees of vertical as the map is only rotated in 90 degree increments to keep performance reasonable.
o There is a new button available in the screen designer to display a North arrow, it also works as a button to turn "Course Up" off and on.
o New page files (*.par1) have been provided with the North arrow on page 1.
* To open up the menu for objects (waypoints, route waypoints and track points) you now only have to click on the object. Holding the stylus down on the object for half a second will show the red circle and when released will show details about the object.
* Map zooming has been improved and is much quicker.
* A warning will be given if GPS NMEA data is lost and the software will try to reconnect to the GPS.
* There is now an option in General Settings to turn off automatic map indexing (not recommended however).
o If you do this you must manually index the maps whenever a map is added deleted or modified.
o If you do not manually index new maps will not be found and the software will still attempt to open deleted maps.
o The "Index Maps" option is on the map Menu.
* The ability to use SRTM height data has been added (this was in version 2.19 but not announced).
o Only SRTM data (SRTM30 (.dem), SRTM3 and SRTM1 (.hgt)) can be used, they must be placed in the "Data File path".
o No other types of height data files can be used.
o There are parameters available in the Screen Designer to display the height data.
* A bug in the scale display when using the Nautical Miles / Feet units has been fixed.
* Clear routes command has been added to the screen designer.
* The OziExplorerCE open file dialog is now used for all platforms not just PocketPC. This means a KB button will now be available on Wince core devices.
* If the Scale Bar is accidentally dragged off screen it will now be pulled back onto the screen.
* Help is now provided in one .chm file.
* OziExplorerCE help engine is now used for all platforms not just for wince devices.

Release Version 2.19 (June 2008)
* The close button (and perhaps other buttons) on the main toolbar disabled the hardware buttons - now fixed.
* The scale can now be moved by dragging directly on the scale window instead of have to click on the window to show the window caption first.
* The Track Toolbar now remembers which track was last in use (the active track) when it is activated.

Source:
OziExplorerCE History

Install on the me Touch HD, over previous version (2.19) it's OK
Serial no need. previous serial it's OK
Many's thank's

[maxkonrad]

That's a lot of changes, thanks wernata:)

[farshid]

Nice Release. +15 WRZ$ Reward. Category: GPS.

any version for wince 5.0?
install with no problem on my hermrs (wm6) but no luck on my wince 5.0 device.

ps

download version from official site and works perfectly with same sn.

link is dead, please reup !!

Link ok 2009-04-25, 08:28 CET

oh , sorry... my mistake... )

thanks and good job.
I also have problem with wince 5.0.
It doesn't start at all .

file is less then 1mb and won't even open, am i doing something wrong?

file is less then 1mb and won't even open, am i doing something wrong?

The file is 9299 kB.

DL links keeps failing. Mediafire link please, if possible.