Skyscape: Rosen and Barkin's 5-Minute Emergency Medicine Consult, 3rd Ed v9.1.0/2007.1.22
Requirements: RAR/WM2003 SE
Overview: This thoroughly updated reference is a must-have for emergency departments, emergency medicine practitioners, and students beginning rotations in the emergency medicine setting. Covering over 600 clinical problems, this quick-reference guide gives clinicians immediate information that is accurate, current, practical, pointed, and thoroughly complete.
More Info:
Download Instructions:
1. Download Software HERE
2. UnRAR and copy folder to PPC SD Card.
3. In PPC, using File Explorer, find copied folder, look for SetupReaderPOC.arm.cab. Install cab file using CabInstall or any other Cabinstaller in your PPC.
4. If you've previously installed any Skyscape Products and used the universal crack/patch, this software does not need to be registered or cracked again since the universal crack/keygen allows you to use this fully upon install.
5. If you've not used Skyscape before, you can download the keygen/crack HERE
and do either one of these two things:
a. Copy the keygen into your "My Documents folder". Enter your five digit code (you'll see this code when you run any of the Skyscape programmes and see the "nag" screen) - and Enjoy your new software; or,
b. Copy the keygen into your "My Documents folder". Use SS2005CK to enter the installed device ID. Try to run the trial program and copy the Device ID. Paste it to the Keygen. when done, close the SS2005CK and re-run the program again (whichever works for you.)
Requirements: RAR/WM2003 SE
Overview: This thoroughly updated reference is a must-have for emergency departments, emergency medicine practitioners, and students beginning rotations in the emergency medicine setting. Covering over 600 clinical problems, this quick-reference guide gives clinicians immediate information that is accurate, current, practical, pointed, and thoroughly complete.
More Info:
Code: Select all
http://www.skyscape.com/estore/ProductDetail.aspx?ProductId=2015Download Instructions:
1. Download Software HERE
2. UnRAR and copy folder to PPC SD Card.
3. In PPC, using File Explorer, find copied folder, look for SetupReaderPOC.arm.cab. Install cab file using CabInstall or any other Cabinstaller in your PPC.
4. If you've previously installed any Skyscape Products and used the universal crack/patch, this software does not need to be registered or cracked again since the universal crack/keygen allows you to use this fully upon install.
5. If you've not used Skyscape before, you can download the keygen/crack HERE
and do either one of these two things:
a. Copy the keygen into your "My Documents folder". Enter your five digit code (you'll see this code when you run any of the Skyscape programmes and see the "nag" screen) - and Enjoy your new software; or,
b. Copy the keygen into your "My Documents folder". Use SS2005CK to enter the installed device ID. Try to run the trial program and copy the Device ID. Paste it to the Keygen. when done, close the SS2005CK and re-run the program again (whichever works for you.)
Last edited by katnaper on Jun 13th, 2007, 2:01 pm, edited 1 time in total.
