Torque v1.4.82
Requirements: ANDROID:1.5 and up
Overview: Measure your Torque and BHP, Find and clear faults, View data in Google Earth! See what your car is doing in realtime, get fault codes, sensor data and more!
Torque is a vehicle / car performance / diagnostics tool that uses an OBD II Bluetooth adapter to connect to your OBD2 engine management / ECU.
It can use the GPS to provide tracker logs with engine logging so you can see what you were doing at any point in time
It can also show and reset a DTC / fault code like a scantool.
It also has:
* Dyno / Dynomometer and Horsepower/HP
* 0-60 timings - see how fast your car is (or truck
)
* Massive fault code database for allowing lookup of fault codes from many different manufacturers
* Send logging information to web or email CSV/KML for analysis via excel / openoffice
* Heads up display / HUD
* GPS Speedo/Tracking - see what you were doing and your engine, at a point in time
* Turbo boost feature for vehicles that support MAP sensors
* Alarms (for example if your coolant temperature goes over 120C!)
Works on any vehicle that supports the OBD2 standard (most vehicles built after 2000 (diesels after 2004) but can work for vehicles as far back as 1996) - if in doubt check with your manufacturer first or look for 'OBD2' on written on a big white label in your engine bay
Has been reported to work on vehicles made by Ford, GM/Vauxhall/Opel, Chrysler, Mercedes, Volkswagen, Audi, Jaguar, Citroen, Peugoet, Skoda, Kia, Mazda, Lexus, Daewoo, Renault, Mitsubishi, Nissan, Honda, Hyundai, BMW, Toyota, Seat, Dodge and many more vehicle makes, European, US, Far East, etc. Some vehicle ECUs may support more/less features than others.
The app needs a Bluetooth OBD2 adapter to work. The adapter is small and plugs into the diagnostics socket on the car which gives your phone access. You can find a list of adapters on: http://torque-bhp.com/wiki/Bluetooth_Adapters (Garmin EcoRoute HD adapters not supported).
Some of the best reliable OBD2 adapters are the Scantool.net adapter, the OBDKey adapter, and PLX Devices Kiwi Bluetooth, ELM327 and other ELM adapters are supported - search on google for where to get them!
More features added every release - there are forums at http://torque-bhp.com/ - if you want something added then let me know and I'll try to add it if it is possible! Vehicle ECUs vary in the amount of sensors supported
What's New:
HTC Evo and Samsung crash workaround (see General Preferences)
Half Display -ve fixes
CONTENT RATING:
Low Maturity
credit to diversity
More Info:
Download Instructions:
http://www.filesonic.com/file/1305842214
Mirrors:
http://www.filefat.com/fbcm0g8l62v5
Requirements: ANDROID:1.5 and up
Overview: Measure your Torque and BHP, Find and clear faults, View data in Google Earth! See what your car is doing in realtime, get fault codes, sensor data and more!
Torque is a vehicle / car performance / diagnostics tool that uses an OBD II Bluetooth adapter to connect to your OBD2 engine management / ECU.
It can use the GPS to provide tracker logs with engine logging so you can see what you were doing at any point in time
It can also show and reset a DTC / fault code like a scantool.
It also has:
* Dyno / Dynomometer and Horsepower/HP
* 0-60 timings - see how fast your car is (or truck
)* Massive fault code database for allowing lookup of fault codes from many different manufacturers
* Send logging information to web or email CSV/KML for analysis via excel / openoffice
* Heads up display / HUD
* GPS Speedo/Tracking - see what you were doing and your engine, at a point in time
* Turbo boost feature for vehicles that support MAP sensors
* Alarms (for example if your coolant temperature goes over 120C!)
Works on any vehicle that supports the OBD2 standard (most vehicles built after 2000 (diesels after 2004) but can work for vehicles as far back as 1996) - if in doubt check with your manufacturer first or look for 'OBD2' on written on a big white label in your engine bay
Has been reported to work on vehicles made by Ford, GM/Vauxhall/Opel, Chrysler, Mercedes, Volkswagen, Audi, Jaguar, Citroen, Peugoet, Skoda, Kia, Mazda, Lexus, Daewoo, Renault, Mitsubishi, Nissan, Honda, Hyundai, BMW, Toyota, Seat, Dodge and many more vehicle makes, European, US, Far East, etc. Some vehicle ECUs may support more/less features than others.
The app needs a Bluetooth OBD2 adapter to work. The adapter is small and plugs into the diagnostics socket on the car which gives your phone access. You can find a list of adapters on: http://torque-bhp.com/wiki/Bluetooth_Adapters (Garmin EcoRoute HD adapters not supported).
Some of the best reliable OBD2 adapters are the Scantool.net adapter, the OBDKey adapter, and PLX Devices Kiwi Bluetooth, ELM327 and other ELM adapters are supported - search on google for where to get them!
More features added every release - there are forums at http://torque-bhp.com/ - if you want something added then let me know and I'll try to add it if it is possible! Vehicle ECUs vary in the amount of sensors supported
What's New:
HTC Evo and Samsung crash workaround (see General Preferences)
Half Display -ve fixes
CONTENT RATING:
Low Maturity
credit to diversity
More Info:
Code: Select all
https://market.android.com/details?id=org.prowl.torqueDownload Instructions:
http://www.filesonic.com/file/1305842214
Mirrors:
http://www.filefat.com/fbcm0g8l62v5
★Please respect the download links of all my releases, thanks.
☆Support Android Devs. If you like this paid app, please donate or buy it.
★Credits to Android+, cdgod, codemoon, Diversity(Rei Ayanami), infinitely, --Legion--, lohan, Notion, sed, SuRViVe, Twingo for all Android Cracking Methods.
(￣ε(#￣)☆╰╮o(￣皿￣///)
☆Support Android Devs. If you like this paid app, please donate or buy it.
★Credits to Android+, cdgod, codemoon, Diversity(Rei Ayanami), infinitely, --Legion--, lohan, Notion, sed, SuRViVe, Twingo for all Android Cracking Methods.
