Torque v1.4.4
Requirements: Android
Overview: See what your car is doing!! Torque is a vehicle / car performance / diagnostics tool that uses Bluetooth ELM/OBD/PLX adapters to connect to your OBD2 engine management / ECU
It can use the GPS to provide tracker logs with engine logging so you can see what you were doing at any point in time
It can also show and reset a DTC / fault code like a scantool.
It also has:
* Dyno / Dynomometer and Horsepower/HP
* 0-60 timings - see how fast your car is (or truck
)
* Massive fault code database for allowing lookup of fault codes from many different manufacturers
* Send logging information to web or email CSV/KML for analysis via excel / openoffice
* Heads up display / HUD
* GPS Speedo/Tracking - see what you were doing and your engine, at a point in time
* Turbo boost feature for vehicles that support MAP sensors
* Alarms (for example if your coolant temperature goes over 120C!)
Works on any vehicle that supports the OBD2 standard (most vehicles built after 2000 (diesels after 2004) but can work for vehicles as far back as 1996) - if in doubt check with your manufacturer first or look for 'OBD2' on written on a big white label in your engine bay
Has been reported to work on vehicles made by GM/Vauxhall/Opel, Ford, Chrysler, Mercedes, Volkswagen, Audi, Jaguar, Citroen, Peugoet, Skoda, Kia, Mazda, Lexus, Daewoo, Renault, Mitsubishi, Nissan, Honda, Hyundai, BMW, Toyota, Seat, Dodge and many more vehicle makes
If you buy one of the cheap china OBD2 bluetooth adapters from ebay/amazon, then make sure you have a good returns policy with the seller as quite a few of the cheap units are defective and 'stop working'/etc.
Some of the best reliable OBD2 adapters are the Scantool.net adapter, the OBDKey adapter, and PLX Devices Kiwi Bluetooth - search on google for where to get them!
More features added every release - there are forums at http://torque-bhp.com/ - if you want something added then let me know and I'll try to add it if it is possible!
Recent changes:
Changes in 1.4.4
=================
* Tweak for powersaving on ScanTool.net OBDLink adapters (you will need their latest firmware on the adapter first before you can use it)
* Fix a crash in the PID editor when putting in an invalid PID
* Fix a crash in bitmap recycling when going between activities on the sony X10
* Fix another couple of crashes to do with the UI being updated in the wrong thread
More Info:
Download Instructions:
http://www.filesonic.com/file/75432445
Mirror:
http://www.duckload.com/download/2676541/2103.apk
Requirements: Android
Overview: See what your car is doing!! Torque is a vehicle / car performance / diagnostics tool that uses Bluetooth ELM/OBD/PLX adapters to connect to your OBD2 engine management / ECU
It can use the GPS to provide tracker logs with engine logging so you can see what you were doing at any point in time
It can also show and reset a DTC / fault code like a scantool.
It also has:
* Dyno / Dynomometer and Horsepower/HP
* 0-60 timings - see how fast your car is (or truck
)* Massive fault code database for allowing lookup of fault codes from many different manufacturers
* Send logging information to web or email CSV/KML for analysis via excel / openoffice
* Heads up display / HUD
* GPS Speedo/Tracking - see what you were doing and your engine, at a point in time
* Turbo boost feature for vehicles that support MAP sensors
* Alarms (for example if your coolant temperature goes over 120C!)
Works on any vehicle that supports the OBD2 standard (most vehicles built after 2000 (diesels after 2004) but can work for vehicles as far back as 1996) - if in doubt check with your manufacturer first or look for 'OBD2' on written on a big white label in your engine bay
Has been reported to work on vehicles made by GM/Vauxhall/Opel, Ford, Chrysler, Mercedes, Volkswagen, Audi, Jaguar, Citroen, Peugoet, Skoda, Kia, Mazda, Lexus, Daewoo, Renault, Mitsubishi, Nissan, Honda, Hyundai, BMW, Toyota, Seat, Dodge and many more vehicle makes
If you buy one of the cheap china OBD2 bluetooth adapters from ebay/amazon, then make sure you have a good returns policy with the seller as quite a few of the cheap units are defective and 'stop working'/etc.
Some of the best reliable OBD2 adapters are the Scantool.net adapter, the OBDKey adapter, and PLX Devices Kiwi Bluetooth - search on google for where to get them!
More features added every release - there are forums at http://torque-bhp.com/ - if you want something added then let me know and I'll try to add it if it is possible!
Recent changes:
Changes in 1.4.4
=================
* Tweak for powersaving on ScanTool.net OBDLink adapters (you will need their latest firmware on the adapter first before you can use it)
* Fix a crash in the PID editor when putting in an invalid PID
* Fix a crash in bitmap recycling when going between activities on the sony X10
* Fix another couple of crashes to do with the UI being updated in the wrong thread
More Info:
Code: Select all
http://www.appbrain.com/app/torque/org.prowl.torqueDownload Instructions:
http://www.filesonic.com/file/75432445
Mirror:
http://www.duckload.com/download/2676541/2103.apk
Support the software & game developers. If you like it then buy it!
Please respect the original links, thanks.
Please respect the original links, thanks.
