miomap v3.xx and igo plus speedcams importing version 1.0 (Freeware)
Requirements: Any PC with microsoft .NET Framework on...
Overview: with this software you can translate any .ov2 speedcam into .mtc for miomap v3.xx or .txt speedcams file for igo plus


This is a my program, is free and don't have a site or download link

More Info:

Code: Select allNo more Info link provided

Download Instructions: http://rapidshare.com/files/81236658/miomap3.xx_igoplus-pdi-importer_from_ov2.rar

P.S.: link reupped, for some bugs in miomap v3.xx extended speedcams builder (only for italian users, if you want try an extended skin, with 10 speedcams warning and not only 4, visit adivor.it, and search and download 1 of lot "skin allargate")
bye!

[cencio]

ervius, please, edit properly your opening post.
Add the short "Overview" description, upload the pic to our server, add more info link (stricly required).
Underline only "Requirements", "Overview", "More Info" and "Download Instruction" words.
Thanks.

ervius, please, edit properly your opening post.
Add the short "Overview" description, upload the pic to our server, add more info link (stricly required).
Underline only "Requirements", "Overview", "More Info" and "Download Instruction" words.
Thanks.

sorry cencio, is first time that I upload some in the forum...
(except for repling in 3ds and posting something there...)
and I don't know howto....
explain em please!!
P.S.: no link there.... only link to download it...

[cencio]

ervius, I already wrote you what you have to do:
Add the short "Overview" description, upload the pic to our server, add more info link (stricly required).
Underline only "Requirements", "Overview", "More Info" and "Download Instruction" words.
Only this is required. Regarding the More Info link, where have you downloaded this application ??

[cencio]

Thanks for your editing.
So, this is your job .. and it is to be consider as a freeware application.
5 WRZ$ freewarereward + 10 WRZ$ for your supporting our community. Thanks.
Category: PC.

[darkness_nightfall]

crashes when i try to change the whole Europe database in to MioMap mtc (skin normal)
(this is under Vista, even with XP sp2 compatability)

Really... Nice work.
It can be an alternative to CSV2ASC if the work is extended in the future

Actually, data in ov2 files have to be in a certain format to be reconized correctly (I mean the speed limit).
I tried with other ov2 files. The txt is generated with correct GPS positions and radar type... But the speed is not reconised.

And also, if I can add a remark, perhaps add a multi select option on the right side (ov2).

Thanks for the work.

[darkness_nightfall]

ok i tried similar tool; miomap v3.xx speedcams creator v 1.6 (Same creator i think)
this one uses *.asc files instead of *.ov2.
I do as told on the website (adivor.it). I put the speedcams (when limited??) in the tool and move them to the appropriate section (speedcam, section,redlight etc).
When i look in MioMap I only see normal speedcam symbols..never redlight cams. Any idea?

ok i tried similar tool; miomap v3.xx speedcams creator v 1.6 (Same creator i think)
this one uses *.asc files instead of *.ov2.
I do as told on the website (adivor.it). I put the speedcams (when limited??) in the tool and move them to the appropriate section (speedcam, section,redlight etc).
When i look in MioMap I only see normal speedcam symbols..never redlight cams. Any idea?

yes, same author, for your problem, I don't know, I tested some the app before post here, and it worked well....
@zebra, for speedlimit, from .ov2, it recognize the speedlimit automatically, but if you have problem, I can post older 2 progras, that create speedcams by .asc, not by .ov2, and one of them is ".asc automatic limiter", so you have to translate .ov2 into .asc, then pass the files with the limiter and finally you can use my old .mtc creator to create speedcams database!!!
bye!
P.S.: for multiselect, open ini files inside the zip file, for every type of speedlimit, you can see one or more speedcamstype, only add there, comma separated more and more speedcams-type...
when you start apps, automatically imports speedcamstipe (ov2 files) in the right cathegory!!
try and tell me!!!
bye!

[darkness_nightfall]

Yes please post the other programms.

I use SCDB speedcams. When i use their speedcam.txt file for Igo200se, all speedcams have their "type" set correct (redlight, speed, etc).
When i use this tool with either ov2 or asc the type gets lost
(all other tools that can make speedcam.mtc, seems to loose the extra information for me)

Ervius..i can put the speedcam file on rapidshare if you want to look at it. PErhaps the ov2 or asc format is not good.

Yes please post the other programms.

I use SCDB speedcams. When i use their speedcam.txt file for Igo200se, all speedcams have their "type" set correct (redlight, speed, etc).
When i use this tool with either ov2 or asc the type gets lost
(all other tools that can make speedcam.mtc, seems to loose the extra information for me)

Ervius..i can put the speedcam file on rapidshare if you want to look at it. PErhaps the ov2 or asc format is not good.

try my older versions.....
here:

Code: Select allhttp://rapidshare.com/files/81851980/old.rar


bye!!!

a little update: now you can create also speedcams for igo8!!
http://rapidshare.com/files/83529955/Miomap-igoplus-8-pdi-importer_1.0.rar
bye!

Ervius , thank's for your program , could you change the limit of 1000 cameras to 10000 for example.

We are working with 5000 in spain at the moment .

Regards.

Ervius , thank's for your program , could you change the limit of 1000 cameras to 10000 for example.

We are working with 5000 in spain at the moment .

Regards.

the limit is only for old program,(if I remember right!) and probally I lost the source......
try to use and configure well new version, or post to me the speedcamsov2 files, I try to integrate the automatic speed-limit limiter into it!!!