[danger007]

SBSH PhoneWeaver v1.0 (requested by dant1)
Requirements: Pocket PC 2003, WM5 and WM6
Overview: PhoneWeaver is a phone management application designed to help control your phone state parameters using profiles in the most intuitive way. Using profiles you can link between your phone state and your agenda, time of day and much more.


Using PhoneWeaver you can define smart profiles that are activated manually or automatically based on the time, appointments or phone state. Each smart profile can fully control the state of your phone radio, Wi-Fi, push mail, Bluetooth, ringer, vibrate state and much more! PhoneWeaver also adds a clean and straightforward plugin to your Today screen, allowing you to view and control the currently active profile. PhoneWeaver is the best way to link your information stored on your mobile device with your device phoning capabilities!

VGA, Windows Mobile 6 Support and General Features

* Complete multi-language support. Introducing English, German, French and Spanish translations
* Includes full VGA support and comes with special graphics for VGA devices
* Supports Pocket PC 2003, Windows Mobile 5 and new Windows Mobile 6 devices
* Complete support for all different screen resolutions and orientations, including square and landscape screens

Profile Manager

* Create up to 100 different profiles that defines your phone behavior based on different variables and states of your phone
* Choose trigger for each profile from four available options: Manual, Time, Agenda or Power
* Configure Time profiles based on day of week and activation hour with up to four different times/days per profile!
* Activate Agenda profiles only for appointments marked with busy state, appointments including attendees, when you're out of office and more
* Create Power profiles that will be activated when your phone is synchronized with your computer and/or connected to power
* Profiles activation follows an advanced logic allowing maximum configuration capabilities and most intuitive and easy to configure for users

Today Screen Plugin

* Places a clean and straightforward Today screen plugin on your Today screen
* View the current active profile name and trigger type icon
* Click profile name section to easily switch between profiles manually
* Special indicator icon is presented when activating a non-manual profile manually
* Use special switch buttons to view and activate or disable your phone radio, Wi-Fi, Bluetooth and push mail state. Optionally re-order, show or hide the led-switch buttons on the Today screen plugin
* Direct access PhoneWeaver settings and profile management section by clicking the Today screen plugin left-most shortcut icon
* Today screen plugin designed to fully support one-handed navigation

More Info:

Code: Select allhttp://www.sbsh.net/products/phoneweaver/

Review: nonstandardized2k6

Download Instructions: http://rapidshare.com/files/28859413/SBSHPhoneWeaver_v1_1_.0_CR.rar
Mirrors:
http://www.sharebig.com/share.php?id=s12fisqttklj0ncps
http://www.megaupload.com/?d=Q4XBN0VH

SBSH PhoneWeaver v1.01(Update)(Patch Inside!)

Ver 1.01, 05/11/2007

* FEATURES ADDED OR CHANGED
o Now support English, Spanish, Dutch, French, German, Italian and Polish languages
o Wait cursor added for taping Phone, WIFI and push LEDs.
o Now "Run program on profile triggering" support not only exe files, but also links and even documents.
o Now if a profile is selected manually, it enters and adjusts parameters even if it was active previously. The opposite remains false: If a profile enters automatically when the same profile is active and some parameter modified manually, it doesn't touch the modified parameters.
* BUGS SOLVED
o Solved a problem that causes the Timeout combo boxes to show information in wrong order or even duplicate.
o Solved a duplicated line in PhWeaver.ini
o Faster WIFI ON/OFF on some devices.
o Faster Phone OFF from LED taps when having a GPRS connection active.
o Changed Phone LED pop-up message for a clearer one.
o Solved annoying message after soft reset "Cannot run PhWeaver.exe
o Better text alignment on Today Plugin.
o Solved a problem that caused that ASUS phones can't turn Phone ON
o Solved a problem with some LEDs order combinations that causes the wrong functions assigned to each LED tap.

http://rapidshare.com/files/31223943/PhoneWeaver1_01WM2003WM5.rar

Mirror:
http://www.sharebig.com/share.php?id=s13juxyxvklLOngqh


Or you can use this Name and Serail to register the original version:

Name : sympda
Serial : 587-EVUFCIDG-829

All credits to Starraf

[unksr00t]

Excelent peace of software... Highly recommended..

Tested and working... 10/10

P.S - Worth the money ($14.95)

That was quick.

Works great on WM5 thanks

10WRZ$ sent

[lifehacker]

Excellent release, 15 WRZ$ + 6 WRZ$ for mirrors. Category: Phone Utilities.

Hi there,
What's the difference between SPBphonetools and PhoneAlarm ?
Thanx alot for this release

[stacknickel]

Thanks for sharing. How to use ringtone with this SW which kept in memory card? I do registry ringtone in memory card. It works with phoneAlarm. But not w/ Phonewaver.

[unksr00t]

Thanks for sharing. How to use ringtone with this SW which kept in memory card? I do registry ringtone in memory card. It works with phoneAlarm. But not w/ Phonewaver.

I had the same problem. I added the ringtones on my SDCard to my ringtones list on memory and after a soft reset I can see them available for my profiles.

[Nicoz]

MIRRORS:
http://rapidshare.com/files/29006058/sbsh_phoneweaver.rar.html
http://www.megaupload.com/?d=LOV4SAHK
http://www.sharebig.com/share.php?id=s10fhrpiiniS2wwWu

[wjd73_59]

more mirrors

Code: Select allhttp://rapidshare.com/files/28886878/SBSH.PhoneWeaver.v1.0.rar

Code: Select allhttp://www.pirateshare.net/?id=7489845

password

Code: Select allwww.mobile-warez.ru

[btdlpw]

Thanks. Had problems with phonealarm, but spb seems to work fine. Will compare this before rom upgrade.

Tested: Works
Tested on: XDA Atom (WM5)
REVIEW
I have always been on the lookout for a good profile manager to install in my phone but I always ended up uninstalling the ones I put in because it’s either bulky, or ugly, or just plain useless (I might as well just tap on the volume button to control the volume). SBSH is a very good profile management program.

Installation: Installing this software is easy enough. You have the option to store it in your memory card so it doesn’t consume precious phone memory space. You’ll have to soft-reset your phone after installing, though it doesn’t prompt you to do so. Mine was quirky until I did a soft reset.

Interface: I’m a sucker for eyecandy. The minimalist design of PhoneWeaver really appealed to me and at first made me tell myself that I hope this software will really work for me because I like how it looks. It sits in my today screen, the space it consumes is as big as that of the unlock button. I like it that way. I have SPB Diary and Pocket Plus, and I wanted my profile manager to look as unobtrusive as possible. The small, shiny black buttons also look good for me.

Features: This isn’t just a profile manager. It’s a very smart one, and it actually works. The Today screen plugin is clean and simple. It has buttons which you can add and remove through the settings. These buttons are bluetooth, wifi, phone, and push email. You can reorder these buttons too. Tapping on the buttons will toggle the feature on/off. If it’s turned on, the button will turn green. The today screen plugin will also show you which profile you have activated, and what type of profile it is (a clock icon will mean it’s a timed profile, a hand icon will mean it’s a manually-activated profile, a calendar-looking icon means it’s triggered by an agenda in your calendar). Profile management is very easy. You can add, delete, rename, and reorder profiles to your heart’s content. It also has a very smart profile management feature. Profile changes can be triggered manually, through a schedule, through your agenda, through power/activesync state. You also have the option to launch a software together with a profile, or to toggle bluetooth, wifi, phone, and push email when you activate a profile. There’s just a little problem with the backlight settings. I don’t know if I’m just doing it wrong. Whenever I have one profile change the backlight setting, activating another profile won’t revert it back to the old settings. For example, I want the backlights to stay on when I activate the “Readingâ€

Thanks. Had problems with phonealarm, but spb seems to work fine. Will compare this before rom upgrade.

I didn't have that problem, but I did notice that my ppc won't play the preinstalled tones in PhoneWeaver, only those that are already in there before i installed the software.

http://forums.sbsh.net/index.php?showtopic=17286

PHONEWEAVER 1.01 CHANGES
FEATURES ADDED OR CHANGED

-Now support English, Spanish, Dutch, French, German, Italian and Polish languages
-Wait cursor added for taping Phone, WIFI and push LEDs.
-Now "Run program on profile triggering" support not only exe files, but also links and even documents.
-Now if a profile is selected manually, it enters and adjust parameters even if it was active previously. The opossite remains false: If a profile enters automatically when the same profile is active and some parameter modified manually, it doesn't toch the modified parameters.

BUGS SOLVED
-Solved a problem that causes the Timeout comboboxes to show information in wrong order or even duplicate.
-Solved a duplicated line in PhWeaver.ini
-Faster WIFI ON/OFF on some devices.
-Faster Phone OFF from LED tap when having a GPRS connection active.
-Changed Phone LED pop-up message for a clearer one.
-Solved annoying message after soft reset "Cannot run PhWeaver.exe
-Better text alignment on Today Plugin.
-Solved a problem that caused that ASUS phones can't turn Phone ON
-Solved a problem with some LEDs order combinations that causes the wrong functions assigned to each LED tap.

Thanks all and hope you enjoy this new release.

we need new cracked version asap

thx

Any news on a crack or keygem for the updated 1.01version?

Hi,

ok, as I couldn't find a crack for 1.01, I had a look at the 1.0 version and applied the corresponding changes to 1.01. Just did a small test and works fine for me.

Here you go :
http://rapidshare.com/files/31215732/abc.rar.html
(not a complete install but only patched exe).

Credits go to the person who patched the 1.0 version.

Bye.