AutoCallLocker 1.0.0.4 (freeware)
Requirements: Only for Omnia device
Overview: As you know the default phone application from the omnia always locks while in a call.
You can press the mouse cursor key, but after (hard to change)period of time it will popup again.
This is an automatic unlocking feature that triggers on the accelerometer(position detector?)
or the build in light sensor.
Brief instructions:
Just install the added .cab file.
Then start the application. Now it should start with a settings screen (as you see in the capture).
Now, you can select which sensor you'd like to use for detecting when to lock/unlock.
Note that locking/unlocking is only influenced while in a call.
For the accelerator you may select a value between 0 (horizontal) and 90 degrees (vertical).
Above the device will lock the screen (when you have your omnia pressed to your head), below it will unlock.
When using the light sensor, you can set a value between 0 (no light) and 100 (max intensity of light).
Again the screen will lock below the threshold (if it is dark), above it will unlock.
Another nice goodie, is the always unlock feature. When set, the device will always be be unlocked in a call.
This is nice when you have placed the device for example in a cradle.
The last feature is an obvious one: Load on system start.
Note with this one set, the application is send to the background immediately after startup, although noticable for a short moment.
Note also that when this option is set, and you close and restart AutoCallLocker, it will also go to the background.
If you restart again, AutoCallLocker will stay maximized, so you can change its settings.
After you've changed its settings, you shoud press the Hide button, that will send the application to the background as well.
If you want to fully close the application, press Close.
Some notes:
* You need to install the Samsung redistributable smi_wm_sdk_redist_1_0_0.cab if you haven't done this before.
Attached File smi_wm_sdk_redist_1_1_0.cab ( 219.29K ) in the download instruction
Older versions:
V1.0.0.3:
Attached File AutoCallLocker1003.CAB ( 162.28K ) Number of downloads: 202
V1.0.0.2:
Attached File AutoCallLocker.CAB ( 173.88K ) Number of downloads: 144
Notes: Uninstall the previous one, in case of trouble check your installation location (most of the time somewhere in \programfiles\AutoCallLocker).
Delete any files (settings.xml) before installing the new one.
Since the old settings.xml file is not compatible with the new one you might get a crash when using it with the new one.
Status history:V1.0.0.4:
Bugfixes:
* When the system has little memory left, the application could be closed unexpectedly.
A fix is made to prevent closing. Please note that in (hopefully) rare circumstances,
when the system has run out of resources completely, the appication might still be closed by the OS.
* When holding the phone upright, just over a 90 degrees angle, the phone unlocks again.
This bug was introduced in the previous version, and has been fixed.
* Some internal fixes for minor (technical) problems.
V1.0.0.3:
Added a few new (requested) functions:
* Sensitivity setting - The previous version reacted a bit 'itchy' on accelerometer changes, so a filter is added to let it react more smoothly.
* A test button - Now you can check if you like the settings without making an actual call.
The right square in the top of the screen shows when it is unlocked (green) or locked (red).
* Speakerphone toggling - When the phone is in an unlocked state, the speakerphone is activated, and de-activated again when the phone is locked.
WARNING: Please check your settings carefully, before using this option.
When the phone is held in such a way that the phone is going from locked to unlocked state, the phone starts very loud before lowering its volume.* Cosmetic update - Well, not absolutely needed, but (my humble opinion) the screen is much nicer now by using transparent controls and using a 'blue' theme.
* Replaced about button - Using a question mark now in the top left corner. Just press on it, and you'll be directed to the ' about' screen.
* Bugfixes? - Did not find major bugs, but some minors have been fixed.
V1.0.0.2:
* Sometimes even I am in a rush...last version contained a nasty bug,
Setting the screen blanking option did not work properly (was not saved in the settings).
* Also, the blanking option is disabled by default now.
V1.0.0.1 :
* Added an option to blank the screen while in a call.
* accelerator is now accelerometer smile.gif
V1.0.0.0 :
* The very first version
More Info:
Download Instructions:
1) smi_wm_sdk_redist_1_1_0.cab (install this first if you haven't installed previously): http://www.ziddu.com/download/7011890/s ... 0.rar.html
2) AutoCallLocker 1.0.0.4: http://www.ziddu.com/download/7011889/A ... 4.rar.html
< CAB file: AutoCallLocker.cab - No serial needed - SiMiLaR > - G & a
Requirements: Only for Omnia device
Overview: As you know the default phone application from the omnia always locks while in a call.
You can press the mouse cursor key, but after (hard to change)period of time it will popup again.
This is an automatic unlocking feature that triggers on the accelerometer(position detector?)
or the build in light sensor.
Brief instructions:
Just install the added .cab file.
Then start the application. Now it should start with a settings screen (as you see in the capture).
Now, you can select which sensor you'd like to use for detecting when to lock/unlock.
Note that locking/unlocking is only influenced while in a call.
For the accelerator you may select a value between 0 (horizontal) and 90 degrees (vertical).
Above the device will lock the screen (when you have your omnia pressed to your head), below it will unlock.
When using the light sensor, you can set a value between 0 (no light) and 100 (max intensity of light).
Again the screen will lock below the threshold (if it is dark), above it will unlock.
Another nice goodie, is the always unlock feature. When set, the device will always be be unlocked in a call.
This is nice when you have placed the device for example in a cradle.
The last feature is an obvious one: Load on system start.
Note with this one set, the application is send to the background immediately after startup, although noticable for a short moment.
Note also that when this option is set, and you close and restart AutoCallLocker, it will also go to the background.
If you restart again, AutoCallLocker will stay maximized, so you can change its settings.
After you've changed its settings, you shoud press the Hide button, that will send the application to the background as well.
If you want to fully close the application, press Close.
Some notes:
* You need to install the Samsung redistributable smi_wm_sdk_redist_1_0_0.cab if you haven't done this before.
Attached File smi_wm_sdk_redist_1_1_0.cab ( 219.29K ) in the download instruction
Older versions:
V1.0.0.3:
Attached File AutoCallLocker1003.CAB ( 162.28K ) Number of downloads: 202
V1.0.0.2:
Attached File AutoCallLocker.CAB ( 173.88K ) Number of downloads: 144
Notes: Uninstall the previous one, in case of trouble check your installation location (most of the time somewhere in \programfiles\AutoCallLocker).
Delete any files (settings.xml) before installing the new one.
Since the old settings.xml file is not compatible with the new one you might get a crash when using it with the new one.
Status history:V1.0.0.4:
Bugfixes:
* When the system has little memory left, the application could be closed unexpectedly.
A fix is made to prevent closing. Please note that in (hopefully) rare circumstances,
when the system has run out of resources completely, the appication might still be closed by the OS.
* When holding the phone upright, just over a 90 degrees angle, the phone unlocks again.
This bug was introduced in the previous version, and has been fixed.
* Some internal fixes for minor (technical) problems.
V1.0.0.3:
Added a few new (requested) functions:
* Sensitivity setting - The previous version reacted a bit 'itchy' on accelerometer changes, so a filter is added to let it react more smoothly.
* A test button - Now you can check if you like the settings without making an actual call.
The right square in the top of the screen shows when it is unlocked (green) or locked (red).
* Speakerphone toggling - When the phone is in an unlocked state, the speakerphone is activated, and de-activated again when the phone is locked.
WARNING: Please check your settings carefully, before using this option.
When the phone is held in such a way that the phone is going from locked to unlocked state, the phone starts very loud before lowering its volume.* Cosmetic update - Well, not absolutely needed, but (my humble opinion) the screen is much nicer now by using transparent controls and using a 'blue' theme.
* Replaced about button - Using a question mark now in the top left corner. Just press on it, and you'll be directed to the ' about' screen.
* Bugfixes? - Did not find major bugs, but some minors have been fixed.
V1.0.0.2:
* Sometimes even I am in a rush...last version contained a nasty bug,
Setting the screen blanking option did not work properly (was not saved in the settings).
* Also, the blanking option is disabled by default now.
V1.0.0.1 :
* Added an option to blank the screen while in a call.
* accelerator is now accelerometer smile.gif
V1.0.0.0 :
* The very first version
More Info:
Code: Select all
http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/290425/autocalllocker/Download Instructions:
1) smi_wm_sdk_redist_1_1_0.cab (install this first if you haven't installed previously): http://www.ziddu.com/download/7011890/s ... 0.rar.html
2) AutoCallLocker 1.0.0.4: http://www.ziddu.com/download/7011889/A ... 4.rar.html
< CAB file: AutoCallLocker.cab - No serial needed - SiMiLaR > - G & a
Last edited by WMgeek on Oct 24th, 2009, 11:29 am, edited 4 times in total.
Join our fan page to receive latest updates of freeware, reviews and news through facebook
-------------------------------------------------------------------
CyberMD - the better place with the better health l FBVids - Share a better video to your friends in facebook
