Vibro v0.4 (Freeware)
Requirements: Pocket PC with WM 5.0, 6.0, 6.1
Overview: Vibro is a program to change the vibration pattern for incoming calls.
Features:
- Separately config Phone and SMS.
- Vibration pattern set for Phone and SMS separately.
- SMS vibration set in lengths in different.
- In what will be Profile Vibrates.
- Choose a Vibrator.
- Cab-File that install the Programm.
Contents of the zip:
- VIBRO.EXE: background program that monitors the incoming call (Always run).
- VIBROCFG.EXE: Configuration Utility to Edit the INI file (Only about configuring).
- VIBRO.INI: number of the vibrator, Profile, Vibrationpattern.
- Some DLL.
How To:
- Install the CAB on the Device.
- Run VIBROCFG.EXE.
- Setup Pattern: Vibrate,Break,Vibrate,Break in ms.
- Setup Profile: In what is to be vibrated Profile (You can see the active Profile in your Phone, under the Profilesettings).
- Setup Vibrator-Nr: Which vibrator works vibrate. Mostly the highest number.
- Configure SMS.
- Press Exit in the Menu and the Programm Save the INI and start the VIBRO.EXE.
- Close VIBROCFG.EXE.
Note:
If the INI file has been modified VIBRO.EXE must be restarted. This makes the CFG program when saving data.
Update Description:
v0.4:
- CAB File Install a shortcut into Startup to start at boot.
- Separate pattern for PHONE and SMS.
- New GUI for VIBROCFG.
- Fix: VIBRO.EXE hide at Startup.
- Fix try: If second call is received, vibrate, no. (Can not test it myself)
More Info:
Download Instructions:
http://rapidshare.com/files/298376346/Vibro_V04.CAB
Mirror:
http://www.mediafire.com/download.php?xydz5yoouum
Requirements: Pocket PC with WM 5.0, 6.0, 6.1
Overview: Vibro is a program to change the vibration pattern for incoming calls.
Features:
- Separately config Phone and SMS.
- Vibration pattern set for Phone and SMS separately.
- SMS vibration set in lengths in different.
- In what will be Profile Vibrates.
- Choose a Vibrator.
- Cab-File that install the Programm.
Contents of the zip:
- VIBRO.EXE: background program that monitors the incoming call (Always run).
- VIBROCFG.EXE: Configuration Utility to Edit the INI file (Only about configuring).
- VIBRO.INI: number of the vibrator, Profile, Vibrationpattern.
- Some DLL.
How To:
- Install the CAB on the Device.
- Run VIBROCFG.EXE.
- Setup Pattern: Vibrate,Break,Vibrate,Break in ms.
- Setup Profile: In what is to be vibrated Profile (You can see the active Profile in your Phone, under the Profilesettings).
- Setup Vibrator-Nr: Which vibrator works vibrate. Mostly the highest number.
- Configure SMS.
- Press Exit in the Menu and the Programm Save the INI and start the VIBRO.EXE.
- Close VIBROCFG.EXE.
Note:
If the INI file has been modified VIBRO.EXE must be restarted. This makes the CFG program when saving data.
Update Description:
v0.4:
- CAB File Install a shortcut into Startup to start at boot.
- Separate pattern for PHONE and SMS.
- New GUI for VIBROCFG.
- Fix: VIBRO.EXE hide at Startup.
- Fix try: If second call is received, vibrate, no. (Can not test it myself)
More Info:
Code: Select all
http://forum.xda-developers.com/member.php?u=392963Download Instructions:
http://rapidshare.com/files/298376346/Vibro_V04.CAB
Mirror:
http://www.mediafire.com/download.php?xydz5yoouum
