XSense 1.2 (freeware)
Requirements: WindowsMobile 6 or later, .Net Framework 3.5, HTC Device with G-Sensor
Overview: Collection of Random but usefull configs with G-Sensor.
Features:
1. Courtesy Profiles:
- Set Volume Profiles to activate on Face-Down & Face-UP events. Choose from: None, Silent, Normal, and Vibrate. You can also choose to suspend the Phone when its facing down.
2. Notifications-Sense:
- IF there is/are any outstanding notification(s), the device will vibrate whenever you move it - at customizable intervals: Missed Call(s), Voice Mail, and SMS.
3. Stylus-Sense:- When the Stylus is in/out: Will play sound + Blink the Back button's light.
- When the Stylus is out and the device is moved: Device will vibrate faintly + blink the Back button's light to REMIND you that the Stylus has not been placed back in. This goes on UNTIL the Stylus is placed where it should be.
* Uses "in.wav" & "out.wav" files in the \XSense\ Dir; you can use whatever wave files for this. OR, use the UI to select whichever wave files you want!
4. General Settings:
- Polling Interval: From 200 to 3000 Miliseconds. This determines the rate at which the G-Sensor is polled. Lower values give higher response times and fluid operation at the cost of battery life & CPU utilization.
- Flash Navi Lights: Will blink button lights to notify you of Profile changes and Stylus In/Out.
- Vibrate on Events: Will induce very subtle vibrations to notify you of Notifications and Profile changes.
- Suspend when UP-Side-Down: ???
- Light Navi Button When Suspended: Will do just that when the Light Sensor senses Dim or Dark conditions. This is an independent setting that turns ON the Navi button's light at suspend time, and OFF at Resume time (this is Event Driven, so no polling is involved). This feature really helps if, like me, you want to see where the damn thing is in the dark - before you launch it against the floor.
5. Installs to "\Program Files\XSense", and Creates 2 shortcuts:
"Start Menu\Programs\XSense" and "Startup\XSenseSvc".
Program Settings are saved to the Registry at "HKCU\Software\XSense\".
Use of System Resources:
1. Diskspace: 162 KB RAM footprint: 374-535 KB Battery: NOT observed.
2. CPU Usage: %0.29 Average. Spikes for 2 seconds to %2.7 - %8.5.
3. Battery Impact: Neligeable if at all!
* Indicated CPU usage occurs ONLY when there is an EVENT (posture changed, stylus in/out Sounds playing,
etc)
- Vibration: The way I like it is in waves of 200 miliseconds length! I generally hate vibrations, so if you want it at 201 ms. you're welcome to make your own program and exercise your personal taste.
- This prgram Registers Event Handlers for: "G-Sensor", "Incoming Call", "Phone Call in Progress", "Stylus in/out", and Power Manager events. DO NOT move it to Internal Storage, you have been warned.
More Info:
Download Instructions: No serial needed
http://rapidshare.com/files/341764016/X ... l.rar.html
Mirrors:
http://www.megaupload.com/?d=MN9RZNUT
http://www.2shared.com/file/10930740/9c ... Final.html
http://www.multiupload.com/2VKIAZ38S1
< CAB file: XSense_1.2-Final.cab - No serial needed - SiMiLaR > - G & a
Requirements: WindowsMobile 6 or later, .Net Framework 3.5, HTC Device with G-Sensor
Overview: Collection of Random but usefull configs with G-Sensor.
Features:
1. Courtesy Profiles:
- Set Volume Profiles to activate on Face-Down & Face-UP events. Choose from: None, Silent, Normal, and Vibrate. You can also choose to suspend the Phone when its facing down.
2. Notifications-Sense:
- IF there is/are any outstanding notification(s), the device will vibrate whenever you move it - at customizable intervals: Missed Call(s), Voice Mail, and SMS.
3. Stylus-Sense:- When the Stylus is in/out: Will play sound + Blink the Back button's light.
- When the Stylus is out and the device is moved: Device will vibrate faintly + blink the Back button's light to REMIND you that the Stylus has not been placed back in. This goes on UNTIL the Stylus is placed where it should be.
* Uses "in.wav" & "out.wav" files in the \XSense\ Dir; you can use whatever wave files for this. OR, use the UI to select whichever wave files you want!
4. General Settings:
- Polling Interval: From 200 to 3000 Miliseconds. This determines the rate at which the G-Sensor is polled. Lower values give higher response times and fluid operation at the cost of battery life & CPU utilization.
- Flash Navi Lights: Will blink button lights to notify you of Profile changes and Stylus In/Out.
- Vibrate on Events: Will induce very subtle vibrations to notify you of Notifications and Profile changes.
- Suspend when UP-Side-Down: ???
- Light Navi Button When Suspended: Will do just that when the Light Sensor senses Dim or Dark conditions. This is an independent setting that turns ON the Navi button's light at suspend time, and OFF at Resume time (this is Event Driven, so no polling is involved). This feature really helps if, like me, you want to see where the damn thing is in the dark - before you launch it against the floor.
5. Installs to "\Program Files\XSense", and Creates 2 shortcuts:
"Start Menu\Programs\XSense" and "Startup\XSenseSvc".
Program Settings are saved to the Registry at "HKCU\Software\XSense\".
Use of System Resources:
1. Diskspace: 162 KB RAM footprint: 374-535 KB Battery: NOT observed.
2. CPU Usage: %0.29 Average. Spikes for 2 seconds to %2.7 - %8.5.
3. Battery Impact: Neligeable if at all!
* Indicated CPU usage occurs ONLY when there is an EVENT (posture changed, stylus in/out Sounds playing,
etc)
- Vibration: The way I like it is in waves of 200 miliseconds length! I generally hate vibrations, so if you want it at 201 ms. you're welcome to make your own program and exercise your personal taste.
- This prgram Registers Event Handlers for: "G-Sensor", "Incoming Call", "Phone Call in Progress", "Stylus in/out", and Power Manager events. DO NOT move it to Internal Storage, you have been warned.
More Info:
Code: Select all
http://forum.xda-developers.com/showthread.php?t=616053Download Instructions: No serial needed
http://rapidshare.com/files/341764016/X ... l.rar.html
Mirrors:
http://www.megaupload.com/?d=MN9RZNUT
http://www.2shared.com/file/10930740/9c ... Final.html
http://www.multiupload.com/2VKIAZ38S1
< CAB file: XSense_1.2-Final.cab - No serial needed - SiMiLaR > - G & a
