nueLED v1.5 (Freeware)
Requirements: PPC WM5, WM6 - HTC Tytan, HTC Kaiser or HTC Touch.
Overview: nueLED is a LED intermediate driver that sits between the LED driver (ALLLEDMGR) and controls which LEDS are signaled. nueLED can also redirect LED signals to another LED, for instance, the signal light to the bluetooth light. nueLED is compatible with all HTC devices that use ALLLEDMGR as the LED control driver, although the LED addresses may differ between devices. The driver DLL is signed, and the required certificate is provided as a provxml.
Basically, you can now turn off your signal light, make it flash blue instead of green, or whatever you wish.
Settings are stored in the registry, -1 means active and -2 means inactive, any other number is a redirect. To figure out new addresses, use diagnostic mode in settings.
Heres a short tutorial on how to make your signal LED flash blue:
- Select the signal led from the list. It has address 8, mode 1.
- Select the option "Redirect to LED Address", and select bluetooth LED.
- Soft-Reset your device.
- Your signal LED should now be blue!
If you use the cab version and decide to remove it, you need to set:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AllLEDMgr]
"Index"=dword:1
and perform a soft reset to re-enable the old led driver. Also delete the [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\nueLED] key.
Stroths has provided a cab file for you to install. A certificate is now included with the cab. You must uninstall any old versions and soft reset for the changes to take effect.
nueLED has only been tested on the HTC Tytan, HTC Kaiser and HTC Touch.
More Info:
Download Instructions:
http://rapidshare.com/files/94678095/no2chem_nueLED_1.5.zip
Mirrors:
http://www.weienterprises.com/nue/no2chem%20nueLED_1.5.zip
Requirements: PPC WM5, WM6 - HTC Tytan, HTC Kaiser or HTC Touch.
Overview: nueLED is a LED intermediate driver that sits between the LED driver (ALLLEDMGR) and controls which LEDS are signaled. nueLED can also redirect LED signals to another LED, for instance, the signal light to the bluetooth light. nueLED is compatible with all HTC devices that use ALLLEDMGR as the LED control driver, although the LED addresses may differ between devices. The driver DLL is signed, and the required certificate is provided as a provxml.
Basically, you can now turn off your signal light, make it flash blue instead of green, or whatever you wish.
Settings are stored in the registry, -1 means active and -2 means inactive, any other number is a redirect. To figure out new addresses, use diagnostic mode in settings.
Heres a short tutorial on how to make your signal LED flash blue:
- Select the signal led from the list. It has address 8, mode 1.
- Select the option "Redirect to LED Address", and select bluetooth LED.
- Soft-Reset your device.
- Your signal LED should now be blue!
If you use the cab version and decide to remove it, you need to set:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AllLEDMgr]
"Index"=dword:1
and perform a soft reset to re-enable the old led driver. Also delete the [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\nueLED] key.
Stroths has provided a cab file for you to install. A certificate is now included with the cab. You must uninstall any old versions and soft reset for the changes to take effect.
nueLED has only been tested on the HTC Tytan, HTC Kaiser and HTC Touch.
More Info:
Code: Select all
http://www.weienterprises.com/nueDownload Instructions:
http://rapidshare.com/files/94678095/no2chem_nueLED_1.5.zip
Mirrors:
http://www.weienterprises.com/nue/no2chem%20nueLED_1.5.zip
Last edited by simid on Feb 29th, 2008, 8:24 pm, edited 2 times in total.
If I were punished for every pun I shed, there would not be left a puny shed of my punnish head.
