Kaiser Notifications v2.02 (Freeware)
Requirements: PPC WM6 - Works with Windows Mobile 6.1 and the .NET compact frame 2.0 or 3.5.
Overview: Version 2.02 - Fixes an error relating to date time parsing when using certain cooked ROMs. If you do not have this problem no need to upgrade.
Whats new in version 2.0?
Audio and vibrate reminder alerts for new items
Version 2 now allows you to add audio and vibrate reminder alerts for unread items. Most mobile phones do this and I started to miss this on the Kaiser. Mobile phones will intermitently beep/vibrate if you have new items but haven't seen them, whereas Windows Mobile generally sounds once when the item arrives but gives no additional sounds after that and leaves it to a flashing LED to get your attention. With this version your Kaiser will play a wav file of your choice and/or vibrate every so many minutes for new items.
To avoid battery drain and annoying those around you in your absence, the phone will increase the time span between reminders, the default is: Item arrives, phone alerts as normal. If after 5 minutes you haven't read the message, it will play the selected wav file and/or vibrate. If the message still goes unread it will then alert again after waiting for 10 minutes, then it will alert after a wait of 15 minutes, then 20 minutes, all the way up to 60 minutes, where it will then alert every hour. These settings are configurable.
Off schedule
You can now set a period where the Kaiser Notification program should not interupt you, typically this would be used for overnight. LEDs stop flashing, and no alerts are played for unread items. You can also select to turn the mobile phone off during this period which is great for saving battery power and knowing you are not going to be woken by a ringing phone.
What's fixed?
When roaming onto networks the LED will now flash normally.
What's still broken?
I've had no joy finding out how to flash the LED amber. You may still select amber as an option, however it will flash green. Hopefully I will get to the bottom of this soon.
As per a few requests I have not been able to adjust the flash rates for the LED, or have them light static while charging.
More Info:
Download Instructions: Installation Instructions
The program must be installed on 'Device' to work, it currently does not work if installed on storage card.
1) Copy the cab file to the device and run it. Install to device and not a storage card. If you have the first version it will be removed automatically.
2) From Programs click the new icon for 'Kaiser Notfication Setup'.
3) On first running the setup program the LEDs will automatically be set to the pre-defined defaults, change as required. Set up a schedule and reminder alerts as required.
A link is placed in the Windows/Startup folder during install that will ensure the tiny program that controls the LEDs is loaded automatically when the Kaiser is soft reset or turned off and back on.
Uninstalling
Use Remove Programs to uninstall. After uninstall a soft reset is necessary to get the LEDs flashing as per the original HTC settings.
http://www.modaco.com/index.php?automod ... ad&id=2400
Rapidshare download http://rapidshare.com/files/113441762/KaiserNotification_cab.CAB.html
Requirements: PPC WM6 - Works with Windows Mobile 6.1 and the .NET compact frame 2.0 or 3.5.
Overview: Version 2.02 - Fixes an error relating to date time parsing when using certain cooked ROMs. If you do not have this problem no need to upgrade.
Whats new in version 2.0?
Audio and vibrate reminder alerts for new items
Version 2 now allows you to add audio and vibrate reminder alerts for unread items. Most mobile phones do this and I started to miss this on the Kaiser. Mobile phones will intermitently beep/vibrate if you have new items but haven't seen them, whereas Windows Mobile generally sounds once when the item arrives but gives no additional sounds after that and leaves it to a flashing LED to get your attention. With this version your Kaiser will play a wav file of your choice and/or vibrate every so many minutes for new items.
To avoid battery drain and annoying those around you in your absence, the phone will increase the time span between reminders, the default is: Item arrives, phone alerts as normal. If after 5 minutes you haven't read the message, it will play the selected wav file and/or vibrate. If the message still goes unread it will then alert again after waiting for 10 minutes, then it will alert after a wait of 15 minutes, then 20 minutes, all the way up to 60 minutes, where it will then alert every hour. These settings are configurable.
Off schedule
You can now set a period where the Kaiser Notification program should not interupt you, typically this would be used for overnight. LEDs stop flashing, and no alerts are played for unread items. You can also select to turn the mobile phone off during this period which is great for saving battery power and knowing you are not going to be woken by a ringing phone.
What's fixed?
When roaming onto networks the LED will now flash normally.
What's still broken?
I've had no joy finding out how to flash the LED amber. You may still select amber as an option, however it will flash green. Hopefully I will get to the bottom of this soon.
As per a few requests I have not been able to adjust the flash rates for the LED, or have them light static while charging.
More Info:
Code: Select all
http://www.modaco.com/index.php?automodule=downloads&showfile=2400Download Instructions: Installation Instructions
The program must be installed on 'Device' to work, it currently does not work if installed on storage card.
1) Copy the cab file to the device and run it. Install to device and not a storage card. If you have the first version it will be removed automatically.
2) From Programs click the new icon for 'Kaiser Notfication Setup'.
3) On first running the setup program the LEDs will automatically be set to the pre-defined defaults, change as required. Set up a schedule and reminder alerts as required.
A link is placed in the Windows/Startup folder during install that will ensure the tiny program that controls the LEDs is loaded automatically when the Kaiser is soft reset or turned off and back on.
Uninstalling
Use Remove Programs to uninstall. After uninstall a soft reset is necessary to get the LEDs flashing as per the original HTC settings.
http://www.modaco.com/index.php?automod ... ad&id=2400
Rapidshare download http://rapidshare.com/files/113441762/KaiserNotification_cab.CAB.html
Last edited by breakx on May 8th, 2008, 3:01 pm, edited 2 times in total.
