Start Menu service v1.5 (freeware)
Requirements: WM5, WM6
Overview: The Start Menu is just one more replacement for the standard menu found on windows mobile pocket pcs. The main difference is that it has been made as a service and so does not need to be launched on startup, it is done automatically, and it is not an extra exe, but a dll loaded by services.exe
Notice:
Change the settings folder name in the registry if the StartMenu/Settings folder has another name.
[HKEY_LOCAL_MACHINE/Services/FdcStartMenu]
"SettingsFolderName"="Settings"
For instance in French, it should be:
"SettingsFolderName"="Paramètres"
More Info:
Download Instructions:
http://rapidshare.com/files/149466036/F ... 5.cab.html
Sometimes the setup of the cab file doesn't install everything as it should. This could be solved by following the procedure described below.
1) Launch TaskMgr (TM) (TaskMgr)
2) From Menu->Actions select Register dll and browse \Windows directory and select ppcmenu.dll
3) Do a soft reset
4) Verify that it works after the reboot by clicking the start button only, not the "Start" text or whatever the translation is, if your device is not in English. This is done by purpose, so both menus (mine and default one) are accessible.
you can also verify, if the service has started, by launching TM and selecting the services Tab.
< CAB file: FdcSoft_StartMenu_wm2005.cab - No serial needed > - G & a
Requirements: WM5, WM6
Overview: The Start Menu is just one more replacement for the standard menu found on windows mobile pocket pcs. The main difference is that it has been made as a service and so does not need to be launched on startup, it is done automatically, and it is not an extra exe, but a dll loaded by services.exe
Notice:
Change the settings folder name in the registry if the StartMenu/Settings folder has another name.
[HKEY_LOCAL_MACHINE/Services/FdcStartMenu]
"SettingsFolderName"="Settings"
For instance in French, it should be:
"SettingsFolderName"="Paramètres"
More Info:
Code: Select all
http://www.dotfred.net/FdcStartMenu.htmDownload Instructions:
http://rapidshare.com/files/149466036/F ... 5.cab.html
Sometimes the setup of the cab file doesn't install everything as it should. This could be solved by following the procedure described below.
1) Launch TaskMgr (TM) (TaskMgr)
2) From Menu->Actions select Register dll and browse \Windows directory and select ppcmenu.dll
3) Do a soft reset
4) Verify that it works after the reboot by clicking the start button only, not the "Start" text or whatever the translation is, if your device is not in English. This is done by purpose, so both menus (mine and default one) are accessible.
you can also verify, if the service has started, by launching TM and selecting the services Tab.
< CAB file: FdcSoft_StartMenu_wm2005.cab - No serial needed > - G & a
If I were punished for every pun I shed, there would not be left a puny shed of my punnish head.
