[jellywobbles]

Update on above:
I completely removed TT6 from PPC and reloaded a fresh.
Looks like TT6 became corrupt but now works fine again with latest April SpeedCams installed. However I note that at least one mobile camera has been omitted in from a road I know still has a regular mobile camera van. Very strange as that camera was listed in the March update.

belch ... Can you tell me just how you removed TT6 from PPC & started again? What files need removing? I ask this since I just got my PPC a week agao (an iPAQ6910) & I do not know my way around it yet?

Thanks in advance.

Thank you for tomtom

@+
Phil

Odd thing is happerning with my TT on my XDA EXEC, 2GB MMC

upgraded ok using UK, IE & WE (660B1223 i think)which is about 260mb or summet, once or twice it came up with the error "unable to start. An exception occurred: Memory access violation" when it was working out a route but been fine

anyways got hold of map UK& IE (660B1219) and everytime i try and start it up its comming up with "unable to start. An exception occurred: Memory access violation" yet im running it fine on my old XDA 2

i havent got loads of crap runnin and the only thing on the pda ram is TT

any1 know whats goin on???

belch ... Can you tell me just how you removed TT6 from PPC & started again? What files need removing? I ask this since I just got my PPC a week agao (an iPAQ6910) & I do not know my way around it yet?

Thanks in advance.

This is how I removed TT6 fro my SPV M2000.

Settings - System - Remove Programmes - TomTom Navigator.
Then click My Device - My Documents and check to see if TomTom folder is present and delete.
Then My Device - Programme Files and check to see if Navigator is present and delete.
I then removed all traces of TT6, maps and Navigator from my SD card,
and reloaded the application from my PC to the SD card via card reader.

This should give a clean new installation.

My problem was caused by having too many POI's on a slow SD card.
I now only have speed cams and a few other essentials like McDonald's...



(.)

Hi All!

FULL setup package for a new or fresh install

Info:

==============================================================
SETUP & CRACK FOR PPC VERSION ONLY
==============================================================

1. Copy to and execute in your pda the ttn2003.cab file contained in 2577 dir.
If you get an error, copy and execute ttn.cab instead.

2. Copy the TomTom SD Card files
Copy in /program files/navigator the extra (not necessary)
folders (raster, schemes, voices) you have.


3. Install map(s)
Install the map(s) that you want to the root of your memory card.
They must be compatible with version 6.

4. If needed (!!!) install Guam Map in order to let the crack works properly.
With this map no activation is required.



PS: change "/program files/" directory with your localized program dir in your PDA


FAQ:
Q. When I install tomtom, I do not have sound anymore afterward. Why?
A. After install remove the following .dll files from windows directory:
BtCoreIf.dll
BtSdkCE30.dll

Q. I played with SD and after installation I deleted the folder 2577
and autorun.exe from SD: TT 6 don't works. How to get TT 6 working again?
A. Made on SD folder 2577 and place a dummy autorun.exe and TT 6.20 work again.

Download:

Code: Select allhttp://rapidshare.com/files/13242570/T_60308320_T.rar.html

RAR PWD:

Code: Select allH3Weg0w1t8DAx1HaTa7rM02Axr1aS2i69z2Rl3XnM2E601x

Credits to brainwave for cab integration.

Bye!
M-CD

Well, I don't understand which package shall I downloaded...
that 8330 version or the 8320 version from http://rapidshare.com/files/13206646/TomTom_6.030_Build_8320.rar

[ninja279]

Could somebody please post a link to TT V6.03 for palm SD load.

Thanks in advance.

here is the thing
first of all thanks for the great posts it really rocks!!

i downloaded this TomTom Navigator from this topic but the thing is it keeps telling me i have no maps :/
i have downloaded from the internet some maps for it, but i dont know where to extract them?
could you please provide more details about installing tomtom? i dont want it to be installed on the device's memory because its having only 10MB free space, thats why i upgraded my Card memory to 2GB.
my device is iPAQ 3970
thanks guys any help is REALLY appreciated

This version doesn't work with Navman iCN 510 with WinCE like 6.00 and 6.02?

Unlike 6.0 - 6.02, Tomtom 6.03 requires note_prj.dll. Most Navman PNAs don't have that file. Although there are various downloadable homemade/dummy note_prj.dll files on the net, if you use one of these in the Navigator folder Tomtom will spit out a memory violation error when your map starts to load.

Stick with v6.02. There isn't enough in v6.03 to get excited about at QVGA.

[jellywobbles]

belch ... Can you tell me just how you removed TT6 from PPC & started again? What files need removing? I ask this since I just got my PPC a week agao (an iPAQ6910) & I do not know my way around it yet?

Thanks in advance.

This is how I removed TT6 fro my SPV M2000.

Settings - System - Remove Programmes - TomTom Navigator.
Then click My Device - My Documents and check to see if TomTom folder is present and delete.
Then My Device - Programme Files and check to see if Navigator is present and delete.
I then removed all traces of TT6, maps and Navigator from my SD card,
and reloaded the application from my PC to the SD card via card reader.

This should give a clean new installation.

My problem was caused by having too many POI's on a slow SD card.
I now only have speed cams and a few other essentials like McDonald's...



(.)

Cheers mate .. will give it a whirl

problem solved
thanks for nothing

[jellywobbles]

FAQ:
Q. When I install tomtom, I do not have sound anymore afterward. Why?
A. After install remove the following .dll files from windows directory:
BtCoreIf.dll
BtSdkCE30.dll
M-CD

Can you tell me exactly how to either re-name or remove these files from my PPC device (I have an ipAQ 6910).

I have Resco File Explorer & I just cannot do anything with these files as they are "system & hidden" files.

I cannot unhide or rename. Even if I run Active Sync & try to "manipulate" from my PC I have the same trouble.

What am I doing wrong?

Thanks

JW

In TomTom where do I copy the Speedcam info?
Is there already a folder where I copy the speedcam info?
Or, I must create a special folder (under what name?)

[dey]

SPANISH TOMTOM
Requirements: TomTom 6 tom tom 5 series one/go
Overview: all the related one to Spain, maps, radars, bmp, manual, etc…


web´s of interest in Spanish:
http://www.elrincondedey.es
Web specialized in tt5, tt6, ttgo/one you found everything what you need to have to the day your gps. it is not necessary to register itself. (except in the forum)

http://www.pdis.es
Web specialized in pdis of all type, but it completes for my. it is necessary to register itself.

http://www.kachoperro.net
this Web he is of the teacher kachoperro, an eminence in Spain with the subject of gps.


UNLOADING OF the KEYGEN´S
hello companions, I leave keygens here you easy to use, one for each map I specify. they keygen for Canarias_660.1219
this keygen single is been worth to activate the map of the Canary Islands v.660.1219 palm/symbian/pocket/go/one
direct unloading
http://rapidshare.com/files/25843963/Canarias_660.1219.rar.html
pasw: elrincondedeytambien disponible en el disco duro de el rincon de dey

they keygen for Iberia_652.1204
this they keygen single is been worth to activate the map of Iberia v.652.1204 palm/symbian/pocket/go/one
unloading directa
http://rapidshare.com/files/25843987/Iberia_652.1204.rar.html
pasw: elrincondedey
also available in the hard disk of the dey corner

they keygen for Iberia_660.1219
this they keygen single is been worth to activate the map of Iberia v.660.1219 palm/symbian/pocket/go/one
unloading directa
http://rapidshare.com/files/25844030/Iberia_660.1219.exe.html
pasw: elrincondedey
also available in the hard disk of the dey corner

they keygen for Iberia_Plus_660.1219
this they keygen single is been worth to activate the map of Iberia extra v.660.1219 palm/symbian/pocket/go/one
unloading directa
http://rapidshare.com/files/25843947/Iberia_plus_660.1219.rar.html
pasw: elrincondedey
also available in the hard disk of the dey corner

they keygen for Iberia_Plus_660.1223
this they keygen single is been worth to activate the map of Iberia extra v.660.1223 palm/symbian/pocket/go/one
direct unloading
http://rapidshare.com/files/25844073/Iberia_plus_660.1223.rar.html
pasw: elrincondedey
also available in the hard disk of the dey corner

they keygen for Western_europa_660.1219
this they keygen single is been worth to activate the map of Western_europa v.660.1219 palm/symbian/pocket/go/one
direct unloading
http://rapidshare.com/files/26328240/Western_Europe_660.1219.exe.html
pasw: elrincondedey
also available in the hard disk of the dey corner

they keygen for Western_europa_660.1223
this they keygen single is been worth to activate the map of Western_europa v.660.1223 palm/symbian/pocket/go/one
direct unloading
http://rapidshare.com/files/26328337/Western_Europe_660.1223.exe.html
pasw: elrincondedey
also available in the hard disk of the dey corner

they keygen for Western_europa_660.1256
this they keygen single is been worth to activate the map of Western_europa v.660.1256 palm/symbian/pocket/go/one
direct unloading
http://rapidshare.com/files/26328389/Western_Europe_660.1256.exe.html
pasw: elrincondedey
also available in the hard disk of the dey corner

I have tried everything short of a hard reset to get this TomTom to not start up on Mute mode every time, but I can't get it to fly.
Every time I start this version it is Muted.
6.100 doesn't do that.
I don't imagine there is much of a difference between the 2 builds, so looks like I'm staying on that until a newer version that doesn't start muted comes out.


I have found out what causes it though.
I have DirectPush setup. DirectPush keeps an open data connection all the time.
For some reason in this version of TomTom when you start it if you have a data connection, it starts up muted. If you don't have a data connection, it doesn't start up muted. It's very strange and irritating.

I have tried everything short of a hard reset to get this TomTom to not start up on Mute mode every time, but I can't get it to fly.
Every time I start this version it is Muted.
6.100 doesn't do that.
I don't imagine there is much of a difference between the 2 builds, so looks like I'm staying on that until a newer version that doesn't start muted comes out.

I think this is a bug in 6.03 related to a GPRS connection. If you launch tomtom with GPRS connected, then tomtom seem to think you are on a phone call and so mutes the sound. Launch tomtom without GPRS connected then no problems. Thats how it is for me anyway.

Edit: ah I see you have added the cause yourself at the same time I've replied!