Uber noob, where do I find the device ID?

Has anyone gotten this working on a Touch Pro2

Installation Instructions for Tom Tom 7 (tested on HTC Touch Pro 2)

1. Copy ttn7.916.9189_original_patched file onto device (NOT SD CARD) and install.
2. Restart device after install.
3. Create a My Documents folder on the SD card.
4. Copy map folder (NA835 in this case) to the My Documents folder on the SD card.
5. The next step requires that you're SD card is accessible to the patching program though My Computer
(you're SD card could be inserted into a card slot or you can set you're phone to be recognised as a logical drive)
5. Run 'Alberts Easy Activator' on your PC.
6. Select 'Use TT8_Keygen.exe' since in this case, we are activating the North America maps version 8.
7. Browse for .bif file. It is located in the map directory on the SD card.
8. Browse for the map folder to activate it. Again, this is on the SD card.
9. Browse to find the Meta.txt file. Again, this is on the SD card.
10. Generate the *.dct file.

That's all the patching done.
Lastly, if you want voices, you will be need to download them. Lot's of them can be found around the web for free.

Also, on the HTC Touch Pro 2, an erroneous message appears after restarting the device : 'BttrayCE error after soft reset'
TOMTOM places a new BT dlls under the windows folder that I had to remove:

\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll

You can either ename them or remove them and then soft restart your Touch Pro 2 and everything will go back to normal.

I have a htc-tp2
where to get the tt : ttn7.916.9189_original_patched file ?????

Thanks !

Is there a way to install this on a PNA?, I have an XROAD V4150.
I can install on SD but not on Device (The WM5 OS and everything is on Rom).

I have had success installing some other GPS software (just had to change the folder and .exe name to MobileNavigator and copy to SD card).

Guys, is there a TomTom7 for XPERIA X1?

Hey, which version did you install? htc / vga? Just hangs installing the cabs for me ..
thanks

I installed it on my HTC Diamond 2 and only works if i'm connected to mobile internet
Doesn't work with the internal gps antenna, cant find any satelites
Any ideas?

I don`t get it
Which Version or files do I need to let TT run on my WinCE 5.0 device??

On the main page is something writte about replacing,...
BUT can I take the "916" Version as master installation?

Greet`s

For anybody experiencing the "not enough memory" error make sure the executable file is named either "TomTom Navigator.exe" or "Navigator.exe". Otherwise, it will not work.

Hey i was wondering if anyone can tell me how to install this properly onto the HTC Touch Pro cause when i've installed it via the .CAB it askes for voices and cant find the maps even tho i have it on the storage card.

Device and OS: CHINESE CAR TOUCHSCREEN PNA with WinCE5.0
Installed package: TomTom 7 (910.9185 ) PNA_WinCE5.0
Installed maps: latest greece 835.2430

Description of Problem: With TOMTOM in navigation mode or just cruising the screen freezes... The GPS works and locks the position but in order to see it also on the screen you need to touch the screen and then it gives you the position again, the arrow moves according to the car position... and following a minute or so of good operation, the screen freezes again... and the same happens continuously...
Any help will be much appreciated.

For chinise WinCE radio you have to use TT 7.451 version. I had the same issue withe TT 7.910

Good Luck

Ok i got tomtom installed and everything seems to be working EXCEPT... i cant seem to pick up a gps signal... its just not locking on and i've tried sitting outdoors for like 20 min and still picks up nothing... I just get "waiting for valid GPS signal" and thats all i get nothing else...

Device and OS: CHINESE CAR TOUCHSCREEN PNA with WinCE5.0
Installed package: TomTom 7 (910.9185 ) PNA_WinCE5.0
Installed maps: latest greece 835.2430

Description of Problem: With TOMTOM in navigation mode or just cruising the screen freezes... The GPS works and locks the position but in order to see it also on the screen you need to touch the screen and then it gives you the position again, the arrow moves according to the car position... and following a minute or so of good operation, the screen freezes again... and the same happens continuously...
Any help will be much appreciated.

To solve the problem go to ...Control Panel...Power....Schemes...and on AC Power and Battery Power (if you have this option) check Never on all 3 fields below....

Hello to all specialists,

I have a problem with a smartphone Airis T 482 (WM6) from a friend.

Installing TT7.916 runs perfectly, the settings too. The fix is perfect.

In navigation, TT freezes several minutes, then leaves, then freezes, then leaves, then ...
I tried all versions of TT7, from 7450 to 7916. The problem is the same regardless of version.
Hard reset, frequency control processor, to no avail.

If someone has an idea .... or a better solution, I'm interested!

Problem with Cursor ... with 916.9189 vga black

Have changed the main cursor to a car.
It works, but the car is Small ... Changing back to the default cursor, either this remain small ...
In order to get back the original cursor dimensions, I must move/delete the ART/CARS dir ....
Any suggestions ???

Pics small dimensions issue either appears when magnify near a setted POI advice .... shurely it magnify a bit but not as much as it must do when it uses the _XL. pic file ( 44x44 ) .....

I have a touch pro 2 and using this tom tom navigator with usa and canada version 835.2423 maps i have created the meta.dct file and copied it to the map folder in my sd card under my documents. every time i go into tomtom it says the maps are not activated and not sure what I am doing wrong. Does it matter if i install the map folder onto the sd card before or after i copy the .dct file into the map folder. or what else could i be doing wrong. probably something stupid but cant figure it out. does these verison maps work with this tomtom navigator
would greatly appreciate the help