Jun 8th, 2010, 11:14 am
Problem found in Primo :
When i enter an adress, i cannot have the keyboard for the "enter street number page"
I have the keyboard for the choice of the city, for the choice of the street but not for hte street number :(
Jun 8th, 2010, 11:14 am
Jun 8th, 2010, 11:23 am
sambrothers wrote:
GDT wrote:
sambrothers wrote:favorites additions
ability to add/remove/edit speedcams and alerts
+ enhanced junction view (no jcv data needed)

apparently all of these features are already in the original data.zip. this one just unlocks them:

http://www.mediafire.com/?tmjydmmzmzz


This isn't for 400x240 (800x480 hires) devices, right?


nope, just 480x272


any chance to find this data.zip in 800*480 yet ?
Could u type here in this topic where u have found that special unlocked version of data.zip so we may be able to check that place regularly if there are any developments ? :)
Jun 8th, 2010, 11:23 am
Jun 8th, 2010, 11:24 am
carabaothai wrote:Problem found in Primo :
When i enter an adress, i cannot have the keyboard for the "enter street number page"
I have the keyboard for the choice of the city, for the choice of the street but not for hte street number :(

Hi pal, try to change the input type, eg, "More" "QWERTZ" worked for me.
Oh and thanks for your tip above too, however that didnt work for me only removing battery for a period worked for me. Sounds ridiculous I know. :D
Sawadee-Krap
Jun 8th, 2010, 11:24 am
Jun 8th, 2010, 12:12 pm
bongo1 wrote:@Nextasy

I know your problem, because I had the same. Put the content folder into iGO8 where it is as usual and add to Primo sys.txt

[folders]
has_secondary_root=0 [folders]
sdcardpath="\Storage Card\IGO8"
maps="..\..\iGO8\content\map"
buildings="..\..\iGO8\content\building"
dem="..\..\iGO8\content\dem"
speedcam="..\..\iGO8\content\speedcam"
poi="..\..\iGO8\content\poi"
voice="..\..\iGO8\content\voice"


@bongo:

Thx.

I am going to give it a try later and see if its going to work..
Jun 8th, 2010, 12:12 pm
Jun 8th, 2010, 12:31 pm
mildis wrote:Navigon 8310 - ??
I tried to add files to the directory. dlls. But still no positive outcome. Equipment is still restarts :(
I would be very grateful for any solution :)

Put primo all files except content folder in My Flash Disk, and content folder with all files on storage card/rename in sys text/ and everythings run perfect/
Jun 8th, 2010, 12:31 pm
Jun 8th, 2010, 12:55 pm
dxdy wrote:someone on other forum confirmed is TMC Pro license already in Primo with this....
http://rapidshare.com/files/394163973/TMC.zip

Image



Merci for the link.

Just a question: where do you put the "tmceventlist.csv" file of the tmc? I know the "gpstmc.dll" goes into the primo folder.
Thx
Jun 8th, 2010, 12:55 pm
Jun 8th, 2010, 2:22 pm
Nextasy wrote:
dxdy wrote:someone on other forum confirmed is TMC Pro license already in Primo with this....
http://rapidshare.com/files/394163973/TMC.zip

Image



Merci for the link.

Just a question: where do you put the "tmceventlist.csv" file of the tmc? I know the "gpstmc.dll" goes into the primo folder.
Thx


same as dll file... in Primo folder...
Jun 8th, 2010, 2:22 pm
Jun 8th, 2010, 5:13 pm
flypegasus® wrote:
any chance to find this data.zip in 800*480 yet ?
Could u type here in this topic where u have found that special unlocked version of data.zip so we may be able to check that place regularly if there are any developments ? :)



I have a friend that emails me these. I can't really make requests. Is there even a 800x480 skin released by anyone that works correctly?
Jun 8th, 2010, 5:13 pm
Jun 8th, 2010, 6:02 pm
The performance of this new iGO is great. Now I am sharing the Content folder among iGo8, Amgio, and Primo. I cannot specify individual folders (e.g. map or POI) but I have to set the whole Content to "Storage Card\Igo Amigo\Content". Actually I had the same problem when I sharing content between Amigo and iGo8. The 3D building performance is much much better than iGo8 and Amigo. I could not wait for a dem file to show real 3D landscape.
Jun 8th, 2010, 6:02 pm
Jun 8th, 2010, 6:14 pm
Nextasy wrote:
bongo1 wrote:@Nextasy

I know your problem, because I had the same. Put the content folder into iGO8 where it is as usual and add to Primo sys.txt

[folders]
has_secondary_root=0 [folders]
sdcardpath="\Storage Card\IGO8"
maps="..\..\iGO8\content\map"
buildings="..\..\iGO8\content\building"
dem="..\..\iGO8\content\dem"
speedcam="..\..\iGO8\content\speedcam"
poi="..\..\iGO8\content\poi"
voice="..\..\iGO8\content\voice"


@bongo:

Thx.

I am going to give it a try later and see if its going to work..



Tried and it returned error code "cannot find global_cfg" and crashed.

This is what i have in my sys.txt (with the content folder in Igo8):
app="%SDCARD%/Primo"
has_secondary_root=0 [folders]
maps="..\..\iGO8\content\map"
buildings="..\..\iGO8\content\building"
dems="..\..\iGO8\content\dem"
speedcam="..\..\iGO8\content\speedcam"
pois="..\..\iGO8\content\poi"
voice="..\..\iGO8\content\voice"
lang="..\..\iGO8\content\lang"


Thx
Jun 8th, 2010, 6:14 pm
Jun 8th, 2010, 6:29 pm
shruff wrote:
Zeljkamp wrote:
carabaothai wrote:Thanks for this new Igo

Very very slow to get the GPS first position, sometimes i cannot have even after 1 hour (without moving !)



Same problem here, any idea?

I found it necessary to remove the battery for at least 20 mins, this should reset the ports from a previous usage of GPS software, even a hardreset will not be sufficient.
Alternately and from I have been told this is also possible by removing the battery from the device then press and hold the power button for 30-60 seconds, just try it and see, nothing lost if it doesnt work.
Ciao Shruff


I tried just like you said but I haven't succes. I can't get GPS signal... :(
Before Primo I have iGO8.3.2 and everything works perfect.


carabaothai wrote:
Now it's ok for me
You must add to your sys.txt this :

[device]
type="Samsung_GT-i8000"

[gps]
Port=7
Baud=38400

You must check the port and Baud rate in the Omnia Settings and maybe change this part of the sys.txt to have the same settings for Igo.

I try Igo Primo but i prefer Igo8.3.4 or 8.3.2 PDA with skins like Dimka


I have HTC Touch Diamond 2.
Jun 8th, 2010, 6:29 pm
Jun 8th, 2010, 7:08 pm
bongo1:

These lines do nothing, I tried

only the following lines have some effect:

[folders]
has_secondary_root=0
sdcardpath="\Storage Card\IGO8"


@dalanik and Nextasy

I have mixed up my iGO8 folder with AMIGO and Primo files, so I am not sure from where Primo get the informations. From iGO8 or from Primo content? I have to sort out, if I have more time. But for one thing I am pretty sure and thats the fact, that I don't have any map in Primo content. So at least this must be of value
maps="..\..\iGO8\content\map"
Jun 8th, 2010, 7:08 pm