[Kitzie]

yep, transparent is nice but sometimes is good to have this to see if any signal available if no connection....

thx for "map_header_btn.bmp" tip

Please find my amended data.zip for 400x240 (replace original). This one also corrects above problem for 'no GPS' tab top left linking to GPS reception map.

I've also kept some aspects of transparency for next street with font change.All other bits/ changes are in there too. Remember I'm only making modest changes.


http://rapidshare.com/files/397732552/data.zip.html

I'm sure that Dimka Tomsoft will come up with something soon. He's my favourite skinner

PRIMO NOT SAVING SETTINGS:

Does anybody have a solution to this problem. Primo does not save my settings. I have to do the settings again whenever i switch on the navi.

Anybody knows how to rectify this?
Thx

Please help me !

I receive an error message. With device Phuket :
Fatal error occurred in main thread.
address:0xc000ed7d0
Exception:0xc0000005

thanking you in advance

[ProCricketer]

How to transfer user data from IGo8 (ex...Locations). Please suggest for Primo.. I had a lot of locations hate to retype it all. Thanks.

[dxdy]

how you save this locations? favorites, POI, routes?

look in iGO8\save\ directory...

for your POI look file user.upoi

Help help help

I am using Touch Pro2, when primo boots the screen dims to about 30%

can't be seen its too datk. Changing screen on menue to 100% does not help.

Does anyone can help.


Thanks in advance

I have solved the crashing problem with 3d buildings and landmarks. I just simplify the sys.txt and everything works smoothly including TTS. By the way, I have iGo8.2, iGo8.0, iGo8.3.4, iGo Amigo, and Primo all running from the same 16GB SD without any problem.

[device]
type="asus_R700"

[folders]
app="Storage Card/Primo"

[gps]
port="2"
baud="4800"

[rawdisplay]
class="auto"
screen_x=480
screen_y=272
driver=gdi
high_res=1

[timezone]
sync_os_timezone=0
reset_os_timezone=0

[power]
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1

[sound]
Ding=0
suspend_time=5
queue_length=200
sound_volume=255
voice_volume=255

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
tts_gc_size=524288
skip_exit_numbers=2
tts_logics=6

[debug]
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=1400
sound_q_length=200

[roundaboutcam]
enabled=0
centery=50

... simplify the sys.txt and everything works smoothly including TTS.....
....

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
tts_gc_size=524288
skip_exit_numbers=2
tts_logics=6
....

The tts_logics statements are the same but with different values. Which one is correct (presumably 6 is used in this case). By the way, what does 3 or 6 mean?

Hi everyone,

I am a starter, just trying to use Primo on my Omnia i900. Doenloaded and installed the app, all working fine but i can't get a connection to any Satellites. It keeps telling Autodetecting GPS reciever but nothing happens. Here is a copy my sys.txt file

[device]
type="samsung_i900"

[Interface]
resolution_dir="400_240"
screen_x=400
screen_y=240

[Rawdisplay]
HighRes=0
screen_x=400
screen_y=240
class="landscape"

[gps]
port=4
baud=57600

[warning]
speedcam_warning="1"

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400


I would appreciate if any one can help with the external GPS settings in my mob too. I am in melbourne and I don't have data plan. Thanks a lot guys..

Hi everyone,

I am a starter, just trying to use Primo on my Omnia i900. Doenloaded and installed the app, all working fine but i can't get a connection to any Satellites. It keeps telling Autodetecting GPS reciever but nothing happens. Here is a copy my sys.txt file

[device]
type="samsung_i900"

[Interface]
resolution_dir="400_240"
screen_x=400
screen_y=240

[Rawdisplay]
HighRes=0
screen_x=400
screen_y=240
class="landscape"

[gps]
port=4
baud=57600

[warning]
speedcam_warning="1"

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400


I would appreciate if any one can help with the external GPS settings in my mob too. I am in melbourne and I don't have data plan. Thanks a lot guys..

My generic Chinese device did at first.
You would have thought that autodetect would have worked on its own, but it didn't.
I put

[gps]
port=1
baud=4800

in my sys.txt file and it worked first time.
1 and 4800 are the optimum values for my device.

You will have to put the optimum values in yours.
If you don't know them experiment, by working up the port numbers starting at one.
Baud rate is not as critical although of course there is an optimum one Mine is 4800).
Good luck.

Open up sys.txt file with notepad (say) and just alter the values and then click accept the changes when you try to close the file.

... simplify the sys.txt and everything works smoothly including TTS.....
....

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
tts_gc_size=524288
skip_exit_numbers=2
tts_logics=6
....

The tts_logics statements are the same but with different values. Which one is correct (presumably 6 is used in this case). By the way, what does 3 or 6 mean?

Nice catch. The sys.txt I used was modified from the one in my Amigo. I did not notice that extra line. I'll delete the last one. I think the main problem I had was with the dynamiccompressor or the 3d sessions.

[Kitzie]

I'm running Primo on my HD (400x240 res) using WM 6.5.5 NRG Titanium and all is OK see pics.
These are my modest efforts until the big guns (Dimka, Tomsoft, Gurjon etc.) come along



replace data.zip with this one:
http://rapidshare.com/files/398266634/data.zip.html

Am I missing something with the speed cameras?
Sure you can get different camera types up and the thing will show them and ding a warning at you (but it decides the appropriate distance).......I am used to all that and camera voices as well as well as distances that suit me.

Are people saying you can add camera voices yet?
You know the type that say for example 'Gatso.....40mph limit'.
Because there is certainly no facility within the program to do so yet is there?
I added skins to my IGO (not Primo) that had the facility within them.


Is there a skin with this camera voice facility that works with Primo?

Am I missing something with the speed cameras?
Sure you can get different camera types up and the thing will show them and ding a warning at you (but it decides the appropriate distance).......I am used to all that and camera voices as well as well as distances that suit me.

Are people saying you can add camera voices yet?
You know the type that say for example 'Gatso.....40mph limit'.
Because there is certainly no facility within the program to do so yet is there?
I added skins to my IGO (not Primo) that had the facility within them.


Is there a skin with this camera voice facility that works with Primo?

sys.txt:

Code: Select all[warning]
is_spoken=1

[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Warning, speed enforcement area ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=-1
approach_beep_sound="!proxi"

;                                     S P E E D C A M - C A T : 1
[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Warning, speed enforcement area ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=-1
approach_beep_sound="!proxi"

;                                     S P E E D C A M - C A T : 2
[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Warning, speed enforcement area ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=5
approach_beep_sound="!proxi"

;                                     S P E E D C A M - C A T : 3
[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Warning, speed enforcement area ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=-1
approach_beep_sound="!proxi"

;                                     S P E E D C A M - C A T : 4
[speedcam_category:4]
approach_beep_distances="150,150"

activated_spoken_type=speech
activated_speech="Warning, red light camera ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=5
approach_beep_sound="!proxi"

;                                     S P E E D C A M - C A T : 6
[speedcam_category:6]
approach_beep_distances="150,150"
approach_beep_sound="!proxi"

min_frc=5

;                                     S P E E D C A M - C A T : 7
[speedcam_category:7]
approach_beep_distances="150,150"
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 8
[speedcam_category:8]
approach_beep_distances="150,150"
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 9
[speedcam_category:9]
speedcam_snap_distance=50
approach_beep_distances="150,150"
approach_beep_sound="!proxi"
overspeed_sound="!proxi"

min_frc=5

;                                     S P E E D C A M - C A T : 10
[speedcam_category:10]
approach_beep_distances="150,150"
approach_beep_sound="!proxi"
overspeed_sound="!proxi"

activated_spoken_type=speech
activated_speech="Warning, speed enforcement area ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=-1

;                                     S P E E D C A M - C A T : 11
[speedcam_category:11]
approach_beep_sound="!proxi"

activated_spoken_type=speech
activated_speech="Warning, red light camera and speed enforcement area ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=5

;                                     S P E E D C A M - C A T : 12
[speedcam_category:12]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 13
[speedcam_category:13]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 14
[speedcam_category:14]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 15
[speedcam_category:15]
approach_beep_sound="!proxi"

activated_spoken_type=speech
activated_speech="Warning, congestion charge zone ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=5

;                                     S P E E D C A M - C A T : 16
[speedcam_category:16]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 17
[speedcam_category:17]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 18
[speedcam_category:18]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 19
[speedcam_category:19]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 20
[speedcam_category:20]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 21
[speedcam_category:21]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 22
[speedcam_category:22]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 23
[speedcam_category:23]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 24
[speedcam_category:24]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 25
[speedcam_category:25]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 26
[speedcam_category:26]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 27
[speedcam_category:27]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 28
[speedcam_category:28]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 29
[speedcam_category:29]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 30
[speedcam_category:30]
approach_beep_sound="!proxi"

min_frc=-1

;                                     S P E E D C A M - C A T : 31
[speedcam_category:31]
approach_beep_sound="!proxi"

activated_spoken_type=speech
activated_speech="Warning, hazardous intersection ahead"
activated_min_speech_repeat_delay=-1

approach_beep_spoken_type=none
section_start_spoken_type=none
overspeed_spoken_type=none
section_beep_spoken_type=none
section_end_spoken_type=none

min_frc=-1

[tmc]
auto_detour_calc=0
announce_total_route=1

Here are all of the default sys.txt settings that are in the data.zip:

http://www.mediafire.com/?ezkmoozzjz2

Only use the settings you want to change in your sys.txt. There is no need to use them all.