I have a TTS issue on my HD2....

Copied the TTS files from this post http://forum.mobilism.org/viewtopic.php?f=652&t=123996 and selected the english (Samantha TTS) voice. On selection, the voice works and announces have a nice trip but when driving (and simulation), it is silent. The standard (Non TTS) voices work fine.

Anyone else has this issue and been able to figure out a solution!!!!!!!!. My sys.txt is

[device]
type="HTC HD2"

[folders]
app="\Storage Card\Primo"
sdcardpath="\Storage Card\Primo"
content="\Storage Card\Primo\CONTENT"
has_secondary_root=0

[interface]
show_exit=1
resolution_dir="400_240"
screen_x=800
screen_y=480
show_zoombar=1
extra_settings=1

[rawdisplay]
highres="1"
screen_x=800
screen_y=480
class="landscape"

[map]
3d_max_tiltlevel=10000
3d_max_zoomlevel = 3000
3d_min_zoomlevel=40
3d_max_zfar=2000
fake2d_max_zoomlevel = 3000
3d_zfar_horizon_ratio = 200
roadblockicon_maxzoom = 2000

[warning]
speedlimit_warning_voice=2
speedcam_max_lookahead="200"

[smartzoom]
minangle=0
maxangle=80

[phone]
driver="TAPI"
exe_path="\Windows\cprog.exe"
win_name="Phone"

[timezone]
sync_os_timezone=0
reset_os_timezone=0

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
cache=2048
skip_eula=1
compass_type=3
fov=40
smart_2d=1
earth=1
show_oneway=1
mapfontscale=150
disable_outlookpoi=1
show_performance=0
show_oneway=1
show_speed_limit=1
show_poi_boundingrects=1
show_poi_areas=1
show_oneway_3d=1
speedcam_enabled=1
enable_roadshadow=1
enable_buildings=1
enable_roadsign=1
speedcam_enabled=1
show_pedestrian=1
sound_q_length=200
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=400

[loading]
show_statustext=1
show_progressbar=0
progressbar_x=85
progressbar_y=134

[gps]
port="4"
baud="57600"

[feature]
text_guidance=1
signpost_coloring=1
tmc_event_coloring=1
tmc_traffic_side=1
ding=0

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=6
priority="HIGH"
always_say_road_names=1
announce_street_name=1
tts_gc_size=524288
skip_exit_numbers=0

[poi]
enable_pois_before_080217=1

[3d_config]
roadsign_lines_per_screen=20

please is there a resolve to the samsung omnia 2 8000 constant looking for GPS ...thankyou

it would be easier to say it doesn't work on samsung..nobody here seems to have it working....not being smart but what was interesting and a bit of fun is getting frustrating.....thanks

thank you!

very good

Hello ppl,

I want to run this on my HTC Diamond - portrait mode.
Please share a link to the data.zip that stores data for this resolution.

Many thanks

sbihue: what skin you use in your HD2? X1 have same resolution but i don't find any skins ???

Thanks sambrothers....I have put that into my sys.txt and I will try it out on the road tomorrow.
I have tried it and it works.
Cheers.

all of those settings are already in the data.zip by default. Only put in the settings you want to change into your sys.txt. for example if you want to change what it says at red lights and the distance:

[speedcam_category:4]
approach_beep_distances="50,50"
activated_speech="Warning, there is a red light camera ahead. You need to gun it!"

I live in England and we work still in miles. My 'units' are set to miles/yards and so road speeds appear on the map in the red circle as miles per hour....not km per hour.
However my speed camera warning speeds (the ones that appear as you approach speed cameras) come up in km per hour for the speed limit of the cameras.
How can I change this to show miles per hour???
Thank you.

sbihue: what skin you use in your HD2? X1 have same resolution but i don't find any skins ???

I am not using any skin, just whatever came with Primo (in the 1st Post). See the sys.txt above.

Thanks sambrothers....I have put that into my sys.txt and I will try it out on the road tomorrow.
I have tried it and it works.
Cheers.

all of those settings are already in the data.zip by default. Only put in the settings you want to change into your sys.txt. for example if you want to change what it says at red lights and the distance:

[speedcam_category:4]
approach_beep_distances="50,50"
activated_speech="Warning, there is a red light camera ahead. You need to gun it!"

Yes thanks sambrothers, I didn't know that.
I did realise when you gave me the script for the sys.txt file that I would be able to edit it and put my own message in.
What has stopped me so far is which number given in the script relates to which camera type.
The redlight one seems obvious, but the rest are not as easy.

I download my speed cameras files from pocketgpsworld, and they come like this.

1 Fixed cameras.
2 Mobile cameras
3 Redlight
4 pMobile cameras (whatever they are.....)
5 Specs (average speed zone).

In the program the categories are:-

1 Speed camera (presumably fixed).
2 Mobile speed cameras
3 Built-in speed cameras
4 Average speed cameras
5 Redlight cameras
6.Red light and speed cameras

What I would like to know to save me endless experimenting, is which number in the sys.txt file relates to which camera category in the Primo program.
Do you know?

See my post above too for advice on speed camera alerts.
Thanks.

sbihue: what skin you use in your HD2? X1 have same resolution but i don't find any skins ???

I am not using any skin, just whatever came with Primo (in the 1st Post). See the sys.txt above.

i use data.zip (support 400x240) and your sys.txt but i have error: user interface resolution (800x480) is not supported or compatible skin ...

Help please
I need data.zip support 240x320. I have data.zip 320x240 This is worker but the screen horizontal
My device he : Mio p360
thanking you in advance

I need data.zip support 240x320

Join the club

I can not recieve TMC-messages
How to install on PB Compasseo 810?