Hy from Croatia!
If anyone know how to solve my problem with iGO i will be very thankful! When I install iGO june 18 release on microSD card and try to open got hardware id error. Evidently it is a sdhc card problem. I have 8gb microSD card in my HTC P3300. I spend 7 hours doing all I can - install two patches (iGO.exe) from first post Update 4. and 5. but didnt help. Even try with deleting application.dat and then open iGO.exe but also failed. Do someone have a solution? I am hopeless...-(

[drabisan]

Hi,
I have the following configuration HP iPaq 4150 and Hevis BT GPS model FGPSSBT02. Everything is working absolutely perfect with iGo 2006. As I need speedcameras, I installed 2006 plus, smooth install version.
And from this moment...a huge problem appeared.
GPS is disconnecting from time to time and "Bluetooth console" windows appear asking me to select the GPS. I have found an workaround on a Tomtom forum, from a user using iPaq: put BtBrowserEnabled=0 under com port config in registry. So far so good, at least it doesn’t ask me to click on "Bluetooth console" window every few minutes.
But, after several months of using it I manage to isolate the problem: when GPS signal is low or some electrical lines are nearby, GPS is showing disconnected on iGo 2006 plus. It reconnects, by himself, few seconds after I leave the area.
But it is VERY ANNOYING: one times I was in a big intersection and one trolley was next to me. And GPS disconnect! Obvious! My help was tunnel mode of plus version that is showing me the exit.

I have to insist: iGo 2006 doesn't have this problem. In the same hw config!
I have used, for a while, a Holux GPS, and the same behavior! Absolutely identical!

I have brought iGo 2006, with license and, after upgrade to plus, the same problem.

Does anybody have this issue? Is there a fix?

Thanks

[monkey12]

Hy from Croatia!
If anyone know how to solve my problem with iGO i will be very thankful! When I install iGO june 18 release on microSD card and try to open got hardware id error. Evidently it is a sdhc card problem. I have 8gb microSD card in my HTC P3300.

Not the best solution, but you should first consider to try a non sdhc microSD card to run iGO (i.e. a 2gb). If it works then of course you have to change your SD cards every time during the normal operation of your HTC P3300.

But in first post Vagus wrote that iGO 2006plus CAN work on sdhc cards after install his patch-iGO.exe! monkey12 are you saying it's not true??

[monkey12]

But in first post Vagus wrote that iGO 2006plus CAN work on sdhc cards after install his patch-iGO.exe! Vip are you saying it's not true??

Of course it's true but I thought, the sdhc iGO patch was a special solution for Asus PDAs:

update5 (13 Aug 2007)

...here is the cure for ASUS WM6 upgraded or SDHC installed wm5 users(a639, P535, etc.)

Is here a czech friend to translate this post:

Final solution for Asus A 696 from good typek from Czech Republic:

Sorry it is in Czech language.Slovak people understand
Someone can translate it for others?my english is not very good..

Tak jsem vyměnil svojí 632N za A696 a protože používám iGo navigaci, tak jsem ihned narazil na milionkrát omletý problém s iGo.
Nejdřív padal s chybou, jindy zase byla obrazovka nesmyslně rozdělená a uplně nepoužitelná. Co vám budu popisovat, znáte to taky.


Dal jsem se tedy do laborování a přišel jsem na řešení které vám zoufalým ukáže světlo na konci tunelu


Podotýkám že mám A696 s poslední verzí Windows Mobile 6 CZ, tedy V03.0735.00 CSY 0405. Jak se na ní dostat je popsané v jiném threadu.
Instaloval jsem do čistého PDA bez dalšího SW. Na práci s .ZIP souborem doporučuji WinRAR. Verze iGo z 18.6.2007. Uvozovky níže ignorujte, jsou tam pro lepší přehlednost.


Takže:

1) Na SD kartě kde máte iGO jděte do složky "iGO" a najděte soubor "data.zip". Uvnitř tohoto souboru je složka "config" a v této složce je soubor "pocket_pc.ini". Tento soubor smažte.

2) Stáhněte si z Rapidshare upravený "pocket_pc.ini" soubor a tento vložte přesně tam, kde byl původní který jste právě smazali.

3) Nainstalujte do A696 patch (provede se restart, takže se nelekněte)

4) Nainstalujte iGo běžným způsobem a je to.


No a to je pro dnešek všechno, mějte se fajn.

something special that you need is in this archive:

http://rapidshare.com/files/72128939/iGO_Working_A686-A696.rar

in english?

in english?
Only process: (text before isn't important)
1)On SD Card, where you have Igo find file data.zip, open it, inside is folder "config" and inside this folder is file "pocket_pc.ini". This file you must delete.

2)Download from rapidshare modified file "pocket_pc.ini" and put it on the same place as the deleted file

3)Instal patch into your A696 (PDA make restart - don't scare )

4)Instal iGo

Srry my english is bad too

Thanks and happy new year

[vagus]

Let me explain more.
Practical description:
You must use Aug13 release, if you could be able to rename the file \windows\sdmemory.dll

Detailed description:
You must have a ROM based sdmemory.dll driver file. If you installed a SD-reading driver software what-ever reason, then iGO won't work. iGO really checks if sdmemory.dll is in the rom or not. Problem is not related the driver itself but the location of the driver. If you installed a SDHC driver you can rename it. If it is in the ROm, then you can't rename. This explains practictical test. If you have SDHC driver in the ROM, you don't need 13 Aug 2007 patch, then you must search for other reasons, for example faulty SDHC card, or faulty driver.

But in first post Vagus wrote that iGO 2006plus CAN work on sdhc cards after install his patch-iGO.exe! monkey12 are you saying it's not true??

update5 (13 Aug 2007)
...here is the cure for ASUS WM6 upgraded or SDHC installed wm5 users(a639, P535, etc.)

[monkey12]

Let me explain more.
Practical description:
You must use Aug13 release, if you could be able to rename the file \windows\sdmemory.dll

Detailed description:
You must have a ROM based sdmemory.dll driver file. If you installed a SD-reading driver software what-ever reason, then iGO won't work. iGO really checks if sdmemory.dll is in the rom or not. Problem is not related the driver itself but the location of the driver. If you installed a SDHC driver you can rename it. If it is in the ROm, then you can't rename. This explains practictical test. If you have SDHC driver in the ROM, you don't need 13 Aug 2007 patch, then you must search for other reasons, for example faulty SDHC card, or faulty driver.

But in first post Vagus wrote that iGO 2006plus CAN work on sdhc cards after install his patch-iGO.exe! monkey12 are you saying it's not true??

update5 (13 Aug 2007)
...here is the cure for ASUS WM6 upgraded or SDHC installed wm5 users(a639, P535, etc.)

@vagus

Thank you for your summery.

So I understand you correctly, your hints are valid not only for ASUS PDAs, but also for other wm6 or SDHC installed wm5 devices ?

Ok Vagus thank you for your post. You wrote "If you installed a SDHC driver you can rename it. If it is in the ROm, then you can't rename. This explains practictical test. If you have SDHC driver in the ROM, you don't need 13 Aug 2007 patch, then you must search for other reasons, for example faulty SDHC card, or faulty driver"

Let me explain my situation.. My SDHC driver is not in the ROM I install it separately after flashing WM6. And my SDHC card is working perfect.
So,
1. how can I rename SDHC driver to make iGO work?
2. do I need your patch?
3. Can 18 june release iGO work for me?

[vagus]

If you are sure you installed driver, you need Aug13 fix (After installing June18 release).
If you are sure, don't rename the file. Rename is only for testing purposes.

Ok Vagus thank you for your post. You wrote "If you installed a SDHC driver you can rename it. If it is in the ROm, then you can't rename. This explains practictical test. If you have SDHC driver in the ROM, you don't need 13 Aug 2007 patch, then you must search for other reasons, for example faulty SDHC card, or faulty driver"

Let me explain my situation.. My SDHC driver is not in the ROM I install it separately after flashing WM6. And my SDHC card is working perfect.
So,
1. how can I rename SDHC driver to make iGO work?
2. do I need your patch?
3. Can 18 june release iGO work for me?

if your PDA is qVGA, try MioMap V3.3 for PDA

[vagus]

use sktools to read your microSD card's SECID. If it is empty or very short, iGO doesn't like it.
Look at picture:

it is 143283d05a

or find and use kazimirka's card_id.exe to read SECID.

I install a SDHC support patch for HTC Artemis from XDA-developers. So where to put your patch-in the iGO folder on the microSD or somewhere else? Maybe I put in wrong folder..
And yes HTC P3300 has a QVGA screen but I realy want to try iGO.

[vagus]

1- iGO.exe is usually installed to \Program Files\iGO 2006 folder
you need to replace it with Aug13 release
2- MioMap V3.3 PDA is newer than iGO 2006 Plus, and already copes with to SDHC drivers

I install a SDHC support patch for HTC Artemis from XDA-developers. So where to put your patch-in the iGO folder on the microSD or somewhere else? Maybe I put in wrong folder..
And yes HTC P3300 has a QVGA screen but I realy want to try iGO.