[Dune]

2006+ looks a bit crap on VGA devices. Just spotted this on PDA mill, see:

Code: Select allhttp://my.pdamill.com/viewtopic.php?t=2714
 or
http://rapidshare.de/files/37699017/data.zip

...for a better data.zip

/s

Tested it on Loox 560 and it looks great. Yet no bugs found! Thank you very much!

IT works on my old PNA BM6300 !
First you must use "igopna_trying.zip" ;
You don't need GapiHPC, (it works with it too)you could only use IGO gx.dll,
- You must put in sys.txt :
[device]
type="MIO136"
[debug]
smart_2d=1
slowsim=1
loop_sim=1

-you must change pocket_pc.ini in the data.zip\config\ :
after [MIO136], you must change the line :
gx_orientation=2
by : gx_orientation=1

And it works fine !

IT works on my old PNA BM6300 !
First you must use "igopna_trying.zip" ;
You don't need GapiHPC, (it works with it too)you could only use IGO gx.dll,
- You must put in sys.txt :
[device]
type="MIO136"
[debug]
smart_2d=1
slowsim=1
loop_sim=1

-you must change pocket_pc.ini in the data.zip\config\ :
after [MIO136], you must change the line :
gx_orientation=2
by : gx_orientation=1

And it works fine !

yes thank you DDDD31!that it!
it works for me either but for my typhoon myguide3620 i have to put in sys
[device]
type="MIOC320"

you must also modify in pocket_pc.ini in the data.zip\config\

[MIOC320]
info_names="MANTAS device type 2"
gps_port = 2
gps_baud = 9600

or any other gps_port and gps_baud you have on your pna
that's for have gps signal


once again thank you

Soft-reset issue on Mio A701:

I have tried magic crack of igo.exe, but didn't help, after soft-reset the date and time is reset.

Only this works (as already mentioned in this forum): POWER OFF and then POWER ON my Mio...
Strange, I thought that soft-reset is just power off and power on...

I have ROM Lifeforce R70.

Soft-reset issue on Mio A701:

I have tried magic crack of igo.exe, but didn't help, after soft-reset the date and time is reset.

Only this works (as already mentioned in this forum): POWER OFF and then POWER ON my Mio...
Strange, I thought that soft-reset is just power off and power on...

I have ROM Lifeforce R70.

How did you exactly install your 2006 PLUS version??

What steps did ya do?

Thnx

PS Tried renaming the magic igo.exe to application.dat and overwrite the old one?

Thnx

Soft-reset issue on Mio A701:

I have tried magic crack of igo.exe, but didn't help, after soft-reset the date and time is reset.

Only this works (as already mentioned in this forum): POWER OFF and then POWER ON my Mio...
Strange, I thought that soft-reset is just power off and power on...

I have ROM Lifeforce R70.

How did you exactly install your 2006 PLUS version??

What steps did ya do?

Thnx

PS Tried renaming the magic igo.exe to application.dat and overwrite the old one?

Thnx

Yes, I have installed iGO 2006 PLUS version, then I have replaced igo.exe with the one from magic crack, then I have copied this on my storage card and renamed it to application.dat. BUT I have to use POWER OFF and POWER ON instead of soft-reset...

It works great on my HTC P3300! Thank you!

Soft-reset issue on Mio A701:

I have tried magic crack of igo.exe, but didn't help, after soft-reset the date and time is reset.

Only this works (as already mentioned in this forum): POWER OFF and then POWER ON my Mio...
Strange, I thought that soft-reset is just power off and power on...

I have ROM Lifeforce R70.

How did you exactly install your 2006 PLUS version??

What steps did ya do?

Thnx

PS Tried renaming the magic igo.exe to application.dat and overwrite the old one?

Thnx

Yes, I have installed iGO 2006 PLUS version, then I have replaced igo.exe with the one from magic crack, then I have copied this on my storage card and renamed it to application.dat. BUT I have to use POWER OFF and POWER ON instead of soft-reset...

The same for me

[turbodebeselis]

I have problem get iGO 2006 PLUS version... What runing program (or run map, cockpit) my PPC smal windows write message - Full memory!!!

[darkness_nightfall]

I have problem get iGO 2006 PLUS version... What runing program (or run map, cockpit) my PPC smal windows write message - Full memory!!!

did you do a hardreset before installing?
or is your sd card full?

does it work directly afther a softreset?

Not working on Mio168 WM2003!!

It works on MIO 168 , no problem. Just had to put the magic exe in the Igo folder of the pda
The speedcam works too !

I put magic exe in PDA's program folder and license file on SD, but when starting i have HardwareIDerror and right-bottom "phone end".
Update old version or new installation, no difference. Rename magic exe in application.dat, delete 2577......same problem!!!!

Found some extra debug settings for the latest version.

In sys.txt

[debug]
show_pedestrian=1 ;creates a pedestrian.txt in the ido gir
show_ltn=1 ; no idea?
compass_type=0 ; from 0 to 3, compassicon appearance
pin_sets_start=1 ; no clue?
use_conn_mgr=1 ; for what?

Also it seems that there is an option for driving time trials
or rally. There must be a racing.txt in the igo directory.

Here are some strings from the igo.exe:

Erroneous timestamp: %d, last was %d
freeze_checkpoint_time
Crossed checkpoint %d line at %d, time: %d, percentage: %d
Checkpoint %d time: %s max speed %.2f
Crossed checkpoint %d line at %d
Crossed checkpoint %d without start!
Start!
Crossed start-line at %d
Re-crossed start-line! (%s)
Crossed goal without start!
Crossed end-line at %d
Lap-time: %s (top speed %.2f)
Crossed end-line at %d, time: %d, percentage: %d
freeze_result_time
debug
racing.txt
goalpoi
startpoi
field_size
checkpoint

Anybody with some reference on this racing.txt file?

Cheers/Doei,

Tweakradje

[darkness_nightfall]

i wonder why everyone is using;
slowsim=1

the slow simulation is irritating as hell
for planning long routes it takes ages.