Is it too early to dare ask about a skin for this?

I get "Program application database cannot be found. Please insert original application SD card"

rule08, and others that tried other badly working versions before. You have to delete all IGO8 keys in the registry, if uninstall dosn't help. (I used Resco explorer to do that: find "igo8" without quotes, and delete all keys related to it). Then use the "lite" version in the first post (reset and install again). This time it will work. Follow the instructions in the first post.

This is not the solution. I made a hard reset, so the registry is clean. But on H2210 with Wm03 this error from above is shown.
I tried all version here from the board and other boards, but no works.

Hi - this is my first post so I take the occasion to greet you all.

Anyone tried iGO8 on the Samsung i780, which have a good processor and video-processor although it does have some problems due to its 300*300 resolution? Do you think it would work if I use the below script adjusting it to 300*300?

rgds,
/tilleke

To guys having problems getting it going,

delete this from the sys.txt
[folders]
app="%SDCARD%/iGO8"


and copy this below to replace it

adjust the ( resolution_dir= ) and [rawdisplay] for the resuloution of your device if needed,
and adjust the gps setting for your devive, ie port 1, or 2, or ? and baud 4800, 9600, 57000, or ? to suit.


[interface]
skin="ui_igo8"
resolution_dir="480_272"
vga=0
mapfontscale=135
rotoffset=8

[rawdisplay]
screen_x=480
screen_y=272
highres=0


[debug]
skip_eula=1

[interface]
maxzoom2d=6000000
show_exit=1

[gps]
port="2"
baud="480

Hi all, i'm testing the pna version, settings are ok but if i choose map button on the screen the pna reset when i choose 400x240 with vga=1 but if i choose 320x240 with vga=1 it's ok?

Thanks for your help.

After test the 400x240 skin is bad, vga=0 or vga=1 the result is reset grhhhh !
Have you a good 400x240 skin please?

Thanks.

ps: for information the pnd release is ok in ipaq 314 (with a good skin).

ps: for information the pnd release is ok in ipaq 314 (with a good skin).

Which release have you used for iPAQ 314? Thanks.

Hopefully someone will make a 800 x 480 skin as it will be very good for iPAQ 31x series, Sony Ericsson Xperia X1, Toshiba G900 and other devices with WVGA screens.

A696
download this:http://www.asus.ru/ftp/forum/Cannes_DWM.CAB
install, calibrate screen(because the stylus work is reflected)

I have the same problem

I installed the patch, but now in portrait mode the display is turned 180 degrees (buttons are on the up side of the screen)

Obviously this isn't quite right, any ideeas what to do?

Tried installing A6x6-LCD_V02.CAB - the display works ok, but igo 8 doesn't (4 corner points)

What is "phone me"?

The iGO8_C520.zip ant i'm testing with data.zip in iGo8_Final_Cracked_English_TTS.zip.

I put all in the resident flash. With 400x240, igo run with setting page, goto... but if you select the map bottom reset. with 480x272 it's the same.

Only one work good it's the 320x240 but no full screen
If you have a good 400x240 or a 800x480 thanks.

My sys.txt:

[interface]
skin="ui_igo8"
resolution_dir="320_240"
vga=1

[rawdisplay]
screen_x=800
screen_y=480
highres=1
class="landscape"

[debug]
skip_eula=1
enable_roadshadow=1
fov=52

[map]
auto_nightmode=1
3d_max_tiltlevel=8250

[msnd]
msnd.start=0

3d_max_zoomlevel = 500
fake2d_max_zoomlevel = 3000
3d_zfar_horizon_ratio = 200
roadblockicon_maxzoom = 2000
3d_max_zfar = 500


[gps]
port="7"
baud="9600"

[tmc]
source="gns"
port=3
baud=38400

Hello together

I offer 10 wrz$ for someone who make a crack which is working with the SDHC driver. Especailly a WM5 PDA which is upgraded to WM6.0.

Second possibility:
Is the problem solved when I upgrade to WM6.1?

Third possibility:

Hello Vagus,

you said it ist easy to make such a crack. Can you tell me what to do and/or where I can get the sourcecode of the program?

Greetings Pudl

Getting "Out of memory. Requested: 19200 Cache: 0" error whatever I do :/

Same problem here

GuTi20 wrote:
A696
download this:http://www.asus.ru/ftp/forum/Cannes_DWM.CAB
install, calibrate screen(because the stylus work is reflected)


I have the same problem

I installed the patch, but now in portrait mode the display is turned 180 degrees (buttons are on the up side of the screen)

Obviously this isn't quite right, any ideeas what to do?

Tried installing A6x6-LCD_V02.CAB - the display works ok, but igo 8 doesn't (4 corner points)


you have to recalibrate your screen igo work but i have also tomtom6 and if i installl the patch tomtom don't launch i have to remove it to use tomtom again but in this case igodon't launch !

the memory problem appear to be a problem also in the official release.

i saw a post about that.

there is the English version?

I have a Eten Glofiish X500+ and I have a problem with selecting TMC. Igo crashes every time I try to auto detect TMC.
Does anybody have a solution?
Thanks in advance.

The same at X800.

The same on M700.

This version wouldn't workt with SDHC driver fix in WM5. Wil workt if u uninstalled those driver or sum 1 have to find the fix for this...!!!