Dec 1st, 2008, 10:08 pm
how do i get the default screen/skin to show speed limits all the time.
i have all the warnings enabled, but nothing shows up, not even the warning when speeding. using the latest version of everything.


anybody figured out how to get TMC working with the latest version and the mio moovs (eg 310).
tried different protocols, but still no luck.
according to device settings in smartst preinstalled software:

tmc port open=true
tmc port=1
tmc baud rate=14400
tmc duplex mode=true
tmc gns module=false
tmc command timeout=100
tmc command retry=3


maybe someone can decipher what this means when it comes to setting it for igo8.

regards,
asmd6230
Dec 1st, 2008, 10:08 pm
Dec 1st, 2008, 10:44 pm
JM, your latest data.zip works perfectly on my HTC Tytn II in 240x320, WM 6.1. Thanks.
Is there any possibility to tweak it jut a bit more so that the house numbers can be shown?
I don't use any skins so it would be perfect if the house numbers can be shown without the need for skins.
Dec 1st, 2008, 10:44 pm
Dec 1st, 2008, 11:00 pm
polford wrote:
LZF wrote:New data.zip for iGO 8.3.2.64873, includes 240x320, 320x240, 480x272 and 800x480. Last one was modified and tested by me on a Xperia X1, found no bugs so far. please let me know if there are still bugs in this resolution.

http://rapidshare.com/files/168963684/d ... _fixed.zip
Rename to data.zip

And again as a reminder for the ones with problems: DO NOT USE ANY SKINS WHICH ARE NOT SPECIFICALLY FOR 8.3.2.64873.


Sorry, I overlooked this post first. Any chance you might be doing a portrait mode .... 480x800 ?


I'm now fixing some little things in 800x480, and I will do 480x800 later this week since it's a lot of work.
Dec 1st, 2008, 11:00 pm
Dec 1st, 2008, 11:28 pm
LZF wrote:I'm now fixing some little things in 800x480, and I will do 480x800 later this week since it's a lot of work.


Work's perfect! A lot of thank's
Dec 1st, 2008, 11:28 pm

Don't worry - be happy!
Dec 2nd, 2008, 12:03 am
New data.zip for iGO 8.3.2.64873, includes 240x320, 320x240, 480x272 and 800x480. Last one was modified and tested by me on a Xperia X1, found no bugs so far. please let me know if there are still bugs in this resolution.

01-12-2008
- 800x480: Fixed monocle alignment in 2D (was fucked up by NNG)
- 800x480: Enlarged compass
- 240x320: Fixes made by JetMouse included

Still need to look into the 2D streetname font size.

http://rapidshare.com/files/169330256/d ... xed_v2.zip
Rename to data.zip

Image
left: orginal, right: modified compass

And again as a reminder for the ones with problems:
DO NOT USE ANY SKINS WHICH ARE NOT SPECIFICALLY FOR 8.3.2.64873.
Dec 2nd, 2008, 12:03 am
Dec 2nd, 2008, 1:34 am
Just a beginner's question, sorry if it has already been covered (but I couldn't find). If a new branding.zip causes that during the boot process of iGO there is no status info displayed (eg. Init App, Main View, Starting, ...) How can I change that? Which file(s) need to be modified or deleted? Thanks for the help!
Dec 2nd, 2008, 1:34 am
Dec 2nd, 2008, 1:57 am
LZF, any chance that 240_400 / 400_240 users could be fixed also ??

Thanks
Dec 2nd, 2008, 1:57 am
Dec 2nd, 2008, 4:12 am
Any chance of making a 480x640 and 640x480 resolution data.zip for us Diamond and Touch Pro users? Upscaled 240x320 works, but I would like to see a native VGA resolution.
Dec 2nd, 2008, 4:12 am
Dec 2nd, 2008, 4:39 am
guys

I have noticed that the routing on this version 8.3.2.64873 is not correct. I compared it with the teleatlas version. for example instead of going straight on a road and make a left turn to get to your destination it asks me to go on the freeway and exit roundabout. do I have a bug or are you noticing the same thing. I can not use it like this. Thanks for any ideas
Dec 2nd, 2008, 4:39 am
Dec 2nd, 2008, 5:02 am
Hi, LZF and JM:

Today I tried the new data.zip 240x320 by JM and it worked fine. One problem is that in simulation mode, the refreshing rate is high and smooth, but when I used it to navigate, the refresh rate is much slower than simulation mode. I have enough memory to run the program and I didn't use TTS and skins.


[quote="LZF"]New data.zip for iGO 8.3.2.64873, includes 240x320, 320x240, 480x272 and 800x480. Last one was modified and tested by me on a Xperia X1, found no bugs so far. please let me know if there are still bugs in this resolution.

01-12-2008
- 800x480: Fixed monocle alignment in 2D (was f***ed up by NNG)
- 800x480: Enlarged compass
- 240x320: Fixes made by JetMouse included

Still need to look into the 2D streetname font size.

http://rapidshare.com/files/169330256/d ... xed_v2.zip
Rename to data.zip
Dec 2nd, 2008, 5:02 am
Dec 2nd, 2008, 5:02 am
Hi, LZF and JM:

Thanks for the hard work!

Today I tried the new data.zip 240x320 by JM and it worked fine. One problem is that in simulation mode, the refreshing rate is high and smooth, but when I used it to navigate, the refresh rate is much slower than simulation mode. I have enough memory to run the program and I didn't use TTS and skins.

iGo 8.3.1 (57021) was working fine with higher refreshing rate, but it has a bug: when I am off road (for example in parking lot) and plan a route, then sometimes iGo will hang (looks like infinite route recalculating).


[quote="LZF"]New data.zip for iGO 8.3.2.64873, includes 240x320, 320x240, 480x272 and 800x480. Last one was modified and tested by me on a Xperia X1, found no bugs so far. please let me know if there are still bugs in this resolution.

01-12-2008
- 800x480: Fixed monocle alignment in 2D (was f***ed up by NNG)
- 800x480: Enlarged compass
- 240x320: Fixes made by JetMouse included

Still need to look into the 2D streetname font size.

http://rapidshare.com/files/169330256/d ... xed_v2.zip
Rename to data.zip
Dec 2nd, 2008, 5:02 am
Last edited by aaabbb on Dec 2nd, 2008, 5:24 am, edited 2 times in total.
Dec 2nd, 2008, 5:31 am
i still can not figure it out how to run v8.3.2.64 version on my Asus A696.

There are 2 things happen:

1. open for second then nothing happen.
2. downgrade loop forever.

i have Asus A696 with WM6,please help if anyone have working programs or can solve those problems.

I am really appreciate it.

Thanks again
Dec 2nd, 2008, 5:31 am
Dec 2nd, 2008, 8:05 am
forfunbaby wrote:i still can not figure it out how to run v8.3.2.64 version on my Asus A696.

There are 2 things happen:

1. open for second then nothing happen.
2. downgrade loop forever.

i have Asus A696 with WM6,please help if anyone have working programs or can solve those problems.

I am really appreciate it.

Thanks again


2 of my colleagues have the same P3300. One has no problem, but the second one has exactly same problem as yours. We have no idea of what's going on !???
Dec 2nd, 2008, 8:05 am
Dec 2nd, 2008, 8:52 am
LZF wrote:I'm now fixing some little things in 800x480, and I will do 480x800 later this week since it's a lot of work.


Thanks bro, that's great news! :-)

polford
Dec 2nd, 2008, 8:52 am