I just realized the only difference between my Mio c310x that has the dimness problem and the one that doesn't is the one that has the problem (screen stays dim when turning unit on even though it has external power) is the one I "installed" the c310 unlock thing on, it was a cab file. The one not giving me the problem was a newer version that only needed to be on the SD card. Maybe this has something to do with it? I'd like to return the Mio giving me problems back to factory restore but now it won't get detected in Windows XP any more (the one not giving me problems is detected just fine)

Could u pl. post/upload ur working iGO8 R3 version. Like u, I too have 310x. R3 runs but there is no TTS. Thanks.

Did you replace the 2 .dll files needed to get TTS on the C310x?
This is a known issue, check the TTS thread.

I just realized the only difference between my Mio c310x that has the dimness problem and the one that doesn't is the one that has the problem (screen stays dim when turning unit on even though it has external power) is the one I "installed" the c310 unlock thing on, it was a cab file. The one not giving me the problem was a newer version that only needed to be on the SD card. Maybe this has something to do with it? I'd like to return the Mio giving me problems back to factory restore but now it won't get detected in Windows XP any more (the one not giving me problems is detected just fine)

Could u pl. post/upload ur working iGO8 R3 version. Like u, I too have 310x. R3 runs but there is no TTS. Thanks.

Did you replace the 2 .dll files needed to get TTS on the C310x?
This is a known issue, check the TTS thread.

I did still no TTS. can u specify which 2 dlls. I tried all combinations (from R1 and R3)

Hello.
My device is a mio c520 in which I use MioPocket 2.0 r32

I Installed iGO nov 13th version on my SD card. Got the voices and lang files, also the maps I needed.
The problem is that when I'm trying to load iGO i get this error:

Fatal Error:
Initialization error:
LoadLanguage failed

Any ideas on what should I do?

OK. Thank you all for your replies.
I formatted the SD card, re-copied everything there and the problem was fixed.
The thing is that now i'm using the default data.zip
Which are the advantages of using the Jetmouse's data.zip?

Ah,also the thing with the back button is rly annoying. everytime i hit the back button in iGO, even though my task bar is hidden, start button is clicked. It's really annnoying

I turned off the AGPS function through Kaisertweak, I tried again, and for some reason it worked right now. Yay!

This is well-known issue with IGO8 and WM6.1.

Anyone with TTS on igo 8.3.1.xx find that the speech is too fast? is there anyway of slowing it down?

PDA Autorun included + new branding file from 7 nov release.

Code: Select allhttp://rapidshare.com/files/176371926/nav_nov13.rar

PS: import from outlook might be fixed, i have added missing files.

Deleted!!!

Hi guys,
I have installed iGO8 v8.3.2.64873 on my Yakumo delta 300 and when I start it, it always crashes down at startup. What shall I do?

I just realized the only difference between my Mio c310x that has the dimness problem and the one that doesn't is the one that has the problem (screen stays dim when turning unit on even though it has external power) is the one I "installed" the c310 unlock thing on, it was a cab file. The one not giving me the problem was a newer version that only needed to be on the SD card. Maybe this has something to do with it? I'd like to return the Mio giving me problems back to factory restore but now it won't get detected in Windows XP any more (the one not giving me problems is detected just fine)

Hi,
In Control Panel in my device, I have an icon: USB client switch, in order to be detected for Activesync it must be set in RNDIS.
Hope this one helps.

[Twingo]

PDA Autorun included + new branding file from 7 nov release.

Code: Select allhttp://rapidshare.com/files/176371926/nav_nov13.rar

PS: import from outlook might be fixed, i have added missing files.

Deleted!!!

Yes by me , anyway here it is with TTS support !

Code: Select allhttp://rapidshare.com/files/176525716/nav_nov13_tts_edition_.rar

Merry X-mas everyone! i have a little problem...i was left behind with this topic...and i noticed that my version of Igo Sep 25 on my Touch Diamond has no speedcamera warning tone option what should i do? on the map the cameras are shown, but no warning tone on approach. Solution?

[Lucca]

Merry X-mas everyone! i have a little problem...i was left behind with this topic...and i noticed that my version of Igo Sep 25 on my Touch Diamond has no speedcamera warning tone option what should i do? on the map the cameras are shown, but no warning tone on approach. Solution?

If u use the standard skin, the speedcamera warning tone option appears only with active GPS(satellite)connection in real drive!

Merry Christmas to anyone!

Sorry about posting this here and in the maps thread, but not quite sure which one it should go in....

Problem with North America POIs...hope someone can help. If I use the North America POI file from igo 8.3.2.x (Navteq maps) the NY State POI file is 3MB. The TeleAtlas 2008.04 POI file (used with igo 8.0.0.x) for NY is over 20MB. So - seeing in this thread I can just use the TeleAtlas version, I copied the larger file into my igo 8.3.x POI folder. However I see the following behavior when testing it by searching around my GPS position (my house).

Searching for "Marquee Cinema"

Using the larger Teleatlas file with Igo 8.0.0.x - it finds the nearest is 8 miles away - which is correct
Using the smaller NavTeq file with Igo 8.3.2.x - it finds the nearest is 8 miles away - which is correct
Using the larger Teleatlas file with Igo 8.3.2.x - it finds the nearest one is 113 miles away - obviously wrong

I've confirmed this with sevaral POIs.

Any ideas how to get igo 8.3.2.x to recognize the new POIs correctly? I noticed when I copied all the US POI files into the directory (about 400MB vs. 200MB) the first time I restarted 8.3.2.x it flew right past the INITPOI screen where I had thought it would take some time to assimilate the new files (yes - I reset the device first before trying)

Since only one person responded with seeing this type of behavior (and no solution) - let me ask a different question....does anyone know how to force a full POI INIT to happen? What I mean is usually when you load a new package, the first time you run Igo it sits for a while on the POI INIT screen...then subsequent startups go quickly...is there any way to force Igo into thinking it's got all new POIs to load?

cyclism6486 - I had the same problem as you - the POI's from the 8.0.x maps did not work with the 8.3.x software. After a few hours of trial and error, I found the problem - my version of the map/POI data came from the OCN8 release, and it is not compatible. The most recent version of the 8.0.x map data (2008.4) does work.

See the other thread with the R1 maps http://forum.ppcwarez.org/viewtopic.php?f=256&t=43149 to download the entire 1.2~Gb and it will fix your problem.

Merry Xmass people!Sory for my bad English but i have problem with my BECKER 7914 and igo8 832 64873.The older one (8.3.1. xxxxx) working great but new one crashes at INIT ARI,few seconds from start.What does it mean,i ve tryed all your suggestions from another user with same problem,but- didnt work!
Thx for helping me!

[cyclism6486]

Sorry about posting this here and in the maps thread, but not quite sure which one it should go in....

Problem with North America POIs...hope someone can help. If I use the North America POI file from igo 8.3.2.x (Navteq maps) the NY State POI file is 3MB. The TeleAtlas 2008.04 POI file (used with igo 8.0.0.x) for NY is over 20MB. So - seeing in this thread I can just use the TeleAtlas version, I copied the larger file into my igo 8.3.x POI folder. However I see the following behavior when testing it by searching around my GPS position (my house).

Searching for "Marquee Cinema"

Using the larger Teleatlas file with Igo 8.0.0.x - it finds the nearest is 8 miles away - which is correct
Using the smaller NavTeq file with Igo 8.3.2.x - it finds the nearest is 8 miles away - which is correct
Using the larger Teleatlas file with Igo 8.3.2.x - it finds the nearest one is 113 miles away - obviously wrong

I've confirmed this with sevaral POIs.

Any ideas how to get igo 8.3.2.x to recognize the new POIs correctly? I noticed when I copied all the US POI files into the directory (about 400MB vs. 200MB) the first time I restarted 8.3.2.x it flew right past the INITPOI screen where I had thought it would take some time to assimilate the new files (yes - I reset the device first before trying)

Since only one person responded with seeing this type of behavior (and no solution) - let me ask a different question....does anyone know how to force a full POI INIT to happen? What I mean is usually when you load a new package, the first time you run Igo it sits for a while on the POI INIT screen...then subsequent startups go quickly...is there any way to force Igo into thinking it's got all new POIs to load?

cyclism6486 - I had the same problem as you - the POI's from the 8.0.x maps did not work with the 8.3.x software. After a few hours of trial and error, I found the problem - my version of the map/POI data came from the OCN8 release, and it is not compatible. The most recent version of the 8.0.x map data (2008.4) does work.

See the other thread with the R1 maps http://forum.ppcwarez.org/viewtopic.php?f=256&t=43149 to download the entire 1.2~Gb and it will fix your problem.

Thanks for the pointer....it'll take a while to get the files, but I'll give it a shot. I think I do indeed have the OCN8 files installed.

anyone have any issues with the tts voice speaking too quickly? is there a way of slowing it down?