[Twingo]

i found one bug: no matter which data.zip or branding.zip use, when try run v8.3.2.71348 with SpeedCams West & East Europe for iGO 8 : 06-01-2009 on device with free 30-40 mb ram got error for not enough memory

device with free 64 mb ram and more, no any problems

same problem is with SpeedCams -FULL EU- for iGO8 - 31.01.2009 (Countries listed)

i don't have this problem, i also have 64 mb ram.

For the "off-road lockup" problem, I found that even with no route planned, as soon as I reached the road, iGO 8 just locked up.

I tried 64029 PDA version too, same problem

I had the same problem. Try to change the data.zip and the branding.zip files. After changing these files, the problem has disappeared.

@Bundee -

Can you please post a link to the data.zip and branding.zip you are using which corrected the problem? I'd LOVE to fix this issue!!

Thanks!

i am still struggling to use this program, you cant enter a full postcode, therefore if you dont know the street name, the whole program is completely useless

earni what version of the map do you have? you should be able to enter the full postcode, you just leave a gap between the code. I.E SE24 space 1DN it should work.

[Twingo]

i am still struggling to use this program, you cant enter a full postcode, therefore if you dont know the street name, the whole program is completely useless

Postcodes does work, use your brains and try again

alright im so confused here
im a n00b
and i have a Touch HD...

can somebody please post the links to what i need to get the v8.3.2.64873 version of iGo, there are so many posts, and so many links in the posts, i just need the iGo v8.3.2.64873 + North America Maps + in English

Please someone

i am still struggling to use this program, you cant enter a full postcode, therefore if you dont know the street name, the whole program is completely useless

Make sure you include the space in the middle of the post code - works for me on the UK maps

For the "off-road lockup" problem, I found that even with no route planned, as soon as I reached the road, iGO 8 just locked up.

I tried 64029 PDA version too, same problem

I had the same problem. Try to change the data.zip and the branding.zip files. After changing these files, the problem has disappeared.

@Bundee -

Can you please post a link to the data.zip and branding.zip you are using which corrected the problem? I'd LOVE to fix this issue!!

Thanks!

I'm using these ones without any error:
http://rapidshare.com/files/190835184/data_8.3.2_fixed_v9c.zip
http://rapidshare.com/files/178235301/branding_8.3.2_fixed.zip

Aaaaargh

Help me please.....I so want to get this working.....
I've downloaded the complete package .. installed on sd card .. program loads and then .. NOTHING .. it just goes off ??
I've tried changing the data & branding zips and sys text so many times my head is hurting and it still wont work!!
Thinking of giving up but I just cant..

version using
v8.3.2.71348(jan 7 2009)

sys text says the following
..
[folders]
app="%SDCARD%/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

[map]
2dheadup=1
..

Can anyone help me
ps I am trying to get this on my TOUCH HD

regards
jon

i am still struggling to use this program, you cant enter a full postcode, therefore if you dont know the street name, the whole program is completely useless

Make sure you include the space in the middle of the post code - works for me on the UK maps

i am having the same problem which uk map are you using i have uk ta 2008.7_080902 and uk 7 ppc8_2008 07 and can only ip 4 postcode digits ie bl1 3?

hi, i had the same problem as you with a Touch HD french version and the only thing i did (except changing the data.zip and branding.zip since it's allready posted that there's a problem with them), i added a line at the top of sys.txt :

[project]
name="igo8_pda"

Everything worked fine after.

hi, i had the same problem as you with a Touch HD french version and the only thing i did (except changing the data.zip and branding.zip since it's allready posted that there's a problem with them), i added a line at the top of sys.txt :

[project]
name="igo8_pda"

Everything worked fine after.

Hi Mazon,
Could you tell me what DATA and BRANDING zips your using..
Im now getting an FFUIERROR..

its driving me nuts..

regards

@Bundee -

Can you please post a link to the data.zip and branding.zip you are using which corrected the problem? I'd LOVE to fix this issue!!

Thanks!

I'm using these ones without any error:
http://rapidshare.com/files/190835184/data_8.3.2_fixed_v9c.zip
http://rapidshare.com/files/178235301/branding_8.3.2_fixed.zip[/quote]

Thanks Bundee, but even with these, I still have the off-road lock-up problem. It's strange, it doesn't lock up when going from a real road to off-road, but it does lock up going the opposite way (off-road -> real road)... It seems to happen with or without a route defined.

If anyone has any idea, I'd love to hear them!

Thanks!

Thanks Bundee, but even with these, I still have the off-road lock-up problem. It's strange, it doesn't lock up when going from a real road to off-road, but it does lock up going the opposite way (off-road -> real road)... It seems to happen with or without a route defined.

If anyone has any idea, I'd love to hear them!

Thanks!

That's exactly what I found today. And that explained why I did not notice this serious problem before.

To reproduce this problem, just find a big parking lot and start iGO from there. If iGO 8 shows you are not on any road (even if you select the option "Keep position on road"), then you can drive or walk towards to a road. You will see the lock up.

However, if you start from (or near) a real road, then drive to the same parking lot, then leave, you will not experience the problem.

I wish it's just a data.zip problem. But I am afraid it is not. I was so frustrated in last two days and I am ready to switch to another navigation software. At least now we know we can start iGO on or near a road to avoid this problem.

I've been running the Jan 7 version on my Mio C320. Everything seems to work fine, except sometimes when resuming from standby, iGo will just restart itself. Has anybody found a definitive fix for this? Right now I have it running entirely from the internal flash memory and it has the same problem. I had it running with the app in internal memory and content on the SD card and it had the exact same restart problem (just igo restarting, not the device itself). Before that, I had the entire app/content running from the SD card and sometimes when resuming from standby, the device itself would restart.

I have the same problem with my C230 - so perhaps there is a linkage between similar Mio units. No problems whatsoever with 8.3.2.64873, but when I swapped in the 8.3.2.71348, I get system resets after not using my GPS for a long time upon wake-up. Since not more people are reporting this, there must be something to the Mio link, but I don't know what it might be. I suspected it has something to do with the "GPS Signal Lost" sound clip that seems like it would play right when the software resets itself. Once the reset is finished, everything else works like a charm - but I would like to get to the bottom of this reset issue, especially if it only affects a small number of us and may never be solved in future versions (hopefully it will). In the mean time, it is back to the Nov 13 version for me.

Edit: Now that I think about it, there is a good chance it has to do with memory capabilities of our devices (60 MB for me), if in the wake-up phase a lot is happening like finding a signal, any audio, and perhaps a change into night/day mode. Weird that this bug never happened until this specific version though.