i'm not quite sure what's different with my complete setup than everyone else's, but i've been running the newest jan7 build (and the nov13 build) of 8.3.2.x since they've come out and haven't had a single reboot/crash issue. that problem went away for me about 3 builds ago (sept something of 8.3.2.x, i forget exactly). mio c720t AND c310x.

it's got to be something else..

Georgexy!
(jó dolog ez a magyarság ) Öm igen szoktam figyelni az "okosodó" data.zipet, nálam is a C verziójú van meg. Remélem nem korábbi verziósat kéne megnéznem(?!) esetleg vmi egyéb???

ill. van 1 Mio C520as amin a januári "out of memory" val lép ki:
Requested:-998848
Cache:1019552
ehhez nem tom h kell-ene kalkulálni "számokat" a sys.txt, [debug] (azon belül ugye cache=xxxx vagy/és max_memory=xxxxxxxx vagy/és reserve_memory=xxxxxxx) részhez. :S
ebben esetleg tudsz segíteni?! (vagy jó egy korábban talált "számot" beírni)

és az utolsó az lenne, h az "Extra verziós" oasis részénél engedélyezem ugye a játékokat, ami meg is jelenik, de ien nagyon nagy+csúnya gombokkal. Ezt h tudnám szerkeszteni?!
kössz előre is!!

Aaaaargh

Help me please.....I so want to get this working.....
I've downloaded the complete package .. installed on sd card .. program loads and then .. NOTHING .. it just goes off ??
I've tried changing the data & branding zips and sys text so many times my head is hurting and it still wont work!!
Thinking of giving up but I just cant..

version using
v8.3.2.71348(jan 7 2009)

sys text says the following
..
[folders]
app="%SDCARD%/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

[map]
2dheadup=1
..

Can anyone help me
ps I am trying to get this on my TOUCH HD

regards
jon

Hi guys I have finally got this working YEAH ME !!
BUT I dont seem to be able to enter more than 4 digits in postcode search ... Any ideas ?????

Jon

Aaaaargh

Help me please.....I so want to get this working.....
I've downloaded the complete package .. installed on sd card .. program loads and then .. NOTHING .. it just goes off ??
I've tried changing the data & branding zips and sys text so many times my head is hurting and it still wont work!!
Thinking of giving up but I just cant..

version using
v8.3.2.71348(jan 7 2009)

sys text says the following
..
[folders]
app="%SDCARD%/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

[map]
2dheadup=1
..

Can anyone help me
ps I am trying to get this on my TOUCH HD

regards
jon

Hi guys I have finally got this working YEAH ME !!
BUT I dont seem to be able to enter more than 4 digits in postcode search ... Any ideas ?????

Jon

Postcode input.

Example ... 7 DIGIT .... OL10SPACE5DY
Example ... 6 DIGIT .... OL4SPACE5NY

Did anyone managed to the the multimedia extras (mp3,calculator...etc) work on the V8.3.2.xxx versions ?
I want it to work so bad.....i was told it needs modifications in the IGO8.EXE file.

SKYROCKER - maybe you can help ?

Thanks

Aaaaargh

Help me please.....I so want to get this working.....
I've downloaded the complete package .. installed on sd card .. program loads and then .. NOTHING .. it just goes off ??
I've tried changing the data & branding zips and sys text so many times my head is hurting and it still wont work!!
Thinking of giving up but I just cant..

version using
v8.3.2.71348(jan 7 2009)

sys text says the following
..
[folders]
app="%SDCARD%/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

[map]
2dheadup=1
..

Can anyone help me
ps I am trying to get this on my TOUCH HD

regards
jon

Hi guys I have finally got this working YEAH ME !!
BUT I dont seem to be able to enter more than 4 digits in postcode search ... Any ideas ?????

Jon

Postcode input.

Example ... 7 DIGIT .... OL10SPACE5DY
Example ... 6 DIGIT .... OL4SPACE5NY

Beginning to wonder if this is me ....
I CANT get past 4 digit postcode
for example
WV6space7 ------- wont allow me to input last two digits!!! before it gives me choice of available options the goes to street name and no...
Is it the MAPS i'm using - they were the ones from the 1st post??

jon

Beginning to wonder if this is me ....
I CANT get past 4 digit postcode
for example
WV6space7 ------- wont allow me to input last two digits!!! before it gives me choice of available options the goes to street name and no...
Is it the MAPS i'm using - they were the ones from the 1st post??

jon[/quote]

Jon,
What map are you using ?
NAVTEQ December map 2008 is Ok with UK postcode ( well for any postcode i use ).
TELETAS September 2008 is Ok with UK postcode ( well for any postcode i use ).

Beginning to wonder if this is me ....
I CANT get past 4 digit postcode
for example
WV6space7 ------- wont allow me to input last two digits!!! before it gives me choice of available options the goes to street name and no...
Is it the MAPS i'm using - they were the ones from the 1st post??

jon

Jon,
What map are you using ?
NAVTEQ December map 2008 is Ok with UK postcode ( well for any postcode i use ).
TELETAS September 2008 is Ok with UK postcode ( well for any postcode i use ).[/quote]

Jacko_oafs - Thanks man

I NOW HAVE A COMPLETELY WORKING SYSTEM YEAH!!!!!!!!!!
Had to change the MAP that I had installed to this one
viewtopic.php?f=256&t=53201
SO AM VERY HAPPY NOW

THANKS for all your help - I just needed pushing in the right direction

regards

Jon

You should be OK with 7 digit postcodes using
UnitedKingdom7PPC.fbl and
UnitedKingdom83_2008.Q3_081204_NAVTEQ.fbl

I have found the one below to be 4-digit postcodes
UnitedKingdom8_TA_2008.07_080902.fbl

[JetMouse]

Hi folkz,

After a long time I've got some free time today and I decided to play around a bit with the latest iGO8 v8.3.2.74290, version that so many of you have asked for and look what I have come up with



Yes, you see it right! I managed to get it work with the old good Worldwide Generic license supporting all devices, all maps and even TMC Pro service in certain European countries Next step would be maybe a complete license generator (if I find some time in the future), that will generate such a worldwide licenses working with all future iGO releases using current license algo without touching the executable itself. Since I have publicly stepped back from patching I will not post it here or share my patch with anyone, so please do not PM me about releasing this patch or giving it for testing. However, I will share my findings with SkyRocker, and if he decides to publish it here, it's just up to him...

Regards,
JM

JetMouse, will this allow us to use 8.0.x maps with the newer versions of iGo such as 8.3.x?

PS. Thanks for all the good work you have done with iGO

Thx JM, we're waiting the future releases and innovations.

[h5550]

Georgexy!
(jó dolog ez a magyarság ) Öm igen szoktam figyelni az "okosodó" data.zipet, nálam is a C verziójú van meg. Remélem nem korábbi verziósat kéne megnéznem(?!) esetleg vmi egyéb???

ill. van 1 Mio C520as amin a januári "out of memory" val lép ki:
Requested:-998848
Cache:1019552
ehhez nem tom h kell-ene kalkulálni "számokat" a sys.txt, [debug] (azon belül ugye cache=xxxx vagy/és max_memory=xxxxxxxx vagy/és reserve_memory=xxxxxxx) részhez. :S
ebben esetleg tudsz segíteni?! (vagy jó egy korábban talált "számot" beírni)

és az utolsó az lenne, h az "Extra verziós" oasis részénél engedélyezem ugye a játékokat, ami meg is jelenik, de ien nagyon nagy+csúnya gombokkal. Ezt h tudnám szerkeszteni?!
kössz előre is!!

Bandi, feltételezem hogy a 8.3.1.53558-t változatot használod. Legjobb tudomásom szerint cache, max_memory, és reserve_memory bejegyzések már nem mennek, de kipróbálhatod, talán segit rajtad. Előszőr próbáld ki
[debug]
max_memory=48000000
bejegyzést.
Ha nem segit, próbáld ki
[debug]
reserve_memory=8000000
bejegyzést.
Sok sikert!!
h

Hello,
I installed the 8.3.2.XX version and i have a strange problem. When ever i am in a text input field it keeps on adding a junk character(a rectangle box) and an input sound(just like when you tap on keyboard) every 2-3 seconds. so i couldnt enter any address/number correctly as its all had a box in between the letters. I tried all exes and data.zip and different zip but no help. The navigation works great but no TTS. i was using the 8.0 version on the same PNA with TTS without any issues.

can some body help me with this pls.

[Larry Brent]

You cannot use 8.0.xx maps with 8.3.xx Software.
Btw why would you like to do so?

Larry