May 5th, 2009, 1:54 pm
Thanks, had the right license, but left a renamed Germany-map for backup in the same folder - deleted it and new map shows up.

Q: I have all Euro maps, and there is a Major Roads for Europe. But how does iGO handle cross-nation driving. Is there a Western Europe map, or is driving into another country seamless, provided the right country map is present?
May 5th, 2009, 1:54 pm
May 5th, 2009, 2:31 pm
I doubt it, but maybe there is a workaround.
Geocached pictures are Garmin specific I guess.
May 5th, 2009, 2:31 pm

ASUS MyPal A632N with Windows Mobile 6 | miniSD Card 2GB | SDHC Card 16GB Class 6
May 5th, 2009, 5:21 pm
Squirrel wrote:I doubt it, but maybe there is a workaround.
Geocached pictures are Garmin specific I guess.


I am using tomtom navigator 915.9196 version, it can navigate to geotagged Picture location as well.
May 5th, 2009, 5:21 pm
May 5th, 2009, 6:24 pm
Hi
I would like to use the 8.3.2.83157 on my Mio P550, I have november 08 version running but cannot get the newest version to run. Could someone post an installer version please, the only installer version I can find is June 08.

Thanks
May 5th, 2009, 6:24 pm
May 5th, 2009, 7:55 pm
I can not find any details on what was changed between 80621 and 83157; I started reading at post 4075 (20 apr). I did find one post that stated iGo does not release details of updated minor updates. Is there any reference to detailed changes?

Installing iGo fully took a bit of effort so I am being cautious about upgrading this software unless there is nice benefits. Also there are MANY pages of posted problems doing upgrades on this software so I am extra careful.

thx

Update-FYI: I replaced just the single igo exe as was mentioned in an earlier post and it seems to be fine. Can't tell what changed yet.
May 5th, 2009, 7:55 pm
May 6th, 2009, 12:48 am
Hi to all,
is there anybody to help on my XPERIA, i mean best skin, best sys.txt configuration ect.
Thanks in advance!
May 6th, 2009, 12:48 am
May 6th, 2009, 1:34 am
Hi !

I have the omnia with Igo8. I living in usa florida.
I signed to the tmc /because in here u have to pay for it/
i set up my igo and the tmc find the channels .
it says CA-TMC (code is ok)
when i tried to check the traffic info it is noting it says no information about the traffic.
whats wrong?
i'm hungarian so i use the igo in hungarian language.i have the igo8 8.3.1.57021
whit the usa 2007,1 map.
and i have th dimka skin.
please help because it was 50$
thanks
Lazi
May 6th, 2009, 1:34 am
May 6th, 2009, 6:43 am
Lazi wrote:...i have the igo8 8.3.1.57021
whit the usa 2007,1 map...

Only a guess.

But perhaps these maps (2007.1) are much too old and the (so called) TMC LCL (location list) data is missing in these maps? Therefore you won't see any traffic messages.
May 6th, 2009, 6:43 am

monkey12
May 6th, 2009, 7:00 am
Hi, I'm getting this error message when I'm trying to start the app first time "initialization error: no language files were found", but I've downloaded Lang pack and without unzipping it copied the zip file to content/lang on my storage card, any ideas how to make it to work on my device "LG Incite-WM 6.1". Once again, I've downloaded the program, extracted files to iGO8 folder on my storage card, then copied language zip files to iGO8/content/lang and when I tap iGO8.exe file program starts and then that error message shows up and app stops and doesn't want to go any further. Please help me if you can.
May 6th, 2009, 7:00 am
May 6th, 2009, 9:38 am
I got a huge arrow on the current position when navigation for touch hd, any setup I can do to fix it? Thank you.
May 6th, 2009, 9:38 am
May 6th, 2009, 2:41 pm
Download Main Software included speed cameras

Code: Select allhttp://netfolder.in/folder.php?folder_id=m8UI2rE


Euro Maps and Buildings

Code: Select allhttp://netfolder.in/folder.php?folder_id=W2RsXxp


How to install it:

Download main software and extract it, copy iGO8 folder to your storage card inside the mobile phone.
Download building file and any map you want it extract them and put it in flowing folders in your storage card
Building (*.3dl or *.3dc) -> Storage/iGO8/content/building
Maps (*.fbl) -> Storage/iGO8/content/map

IGO8
├───content
│ ├───building
│ ├───dem
│ ├───lang
│ ├───map
│ ├───poi
│ ├───skin
│ ├───speedcam
│ └───voice
├───defaults
└───license

Run iGO8.exe from your windows mobile
[You can make shortcut to your programs folder as well]

Go to the Settings, in the second page, select GPS and set the port and Baud Rate according to your windows mobile preset.

Attention very important

Inside iGO8 folder there is sys.txt file this one was preset for HTC TOUCH HD 800*480 landscape mode. If you want to run this program in different windows mobile device or in any other resolution you must make some changes in the setting inside sys.txt

Updates:

Use the first post and get latest iGO8.exe and licence file and replace it with old one.

latest sys.txt for HTC TOUCH HD:
Code: Select all[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"

[device]
Type="ALIAS_TOUCH HD"

[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
vga=0

[rawdisplay]
highres=0
autoconfig=1
driver="GX"

[sound]
ding=0

[config]
autoset2donmap=1
autoset3doncockpit=1

[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0

[map]
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000

[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0

[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1

[power]
powermgm_state=0
backlight_day=95
Backlight_night=15

[poi]
enable_pois_before_080217=1
May 6th, 2009, 2:41 pm
May 6th, 2009, 4:43 pm
to GET or to MAKE ?


to get
May 6th, 2009, 4:43 pm
May 6th, 2009, 7:04 pm
henrik.dk wrote:I got a huge arrow on the current position when navigation for touch hd, any setup I can do to fix it? Thank you.

my setup in sys.txt:

[map]
3d_scale_carmodel=1
3dcarsizemin=1000
3dcarsizemax=2000
3dcarsizemul=10000
May 6th, 2009, 7:04 pm