Hi, I am searching for a few days now but it seems that I am the only one with this problem (since I cannot find a solution):
As soon as I have a bluetooth connection with my car radio (which is a carkit aswell JVC KDR801) there is no more sound coming from Igo. Only when there is no bluetooth connection I hear the directions via the phone (Omnia) speaker. The car radio supports streaming audio and acts like a headset.

Does anyone know if it is possible to get the direction voice instructions via bluetooth over my car speakers OR if not possible to even hear it over the phone speaker when bluetooth is on? (in last case I just turn down the volume of my car radio to hear it ) Does no one else here use Igo in a similar setup? I can't believe that. Thanks a million in advange for yr help!

Omnia XKHJ3
IGO 8.3.2.83157

Would IGO8 8.3.2.83157 work on WinCE 5.0. I know it works on WinCE 4.2 (I am running it), but a fella on the forum with WinCE 5.0 can't get it to run due to a message ''igo8 is not a valid windows CE application''

I am having problems with this on my HTC Touch HD as the GPS keeps disconnecting every few seconds during a journey

I'm not sure if its the software or the phone as both are new but I never had a problem with previous igo versions running on my last phone which was HTC TyTN II. Has anyone else had a similar problem?

I had the same problem, update your radio to 1.14... and your problem will be solved.

[realbob]

Hi friends, i have a serious problem. Last week i bought a chinese GPS with igo 8.0.. software and map. I installed amigo and Saturday, everything was good. But on Sunday the GPS started to can't connect to satellites. Then i installed igo 8.3... april version. I can see the GPS can find satellites, there r 6-7 satellites but they r all red, they don't turn yellow or green. I tried every baud rate and port numbers, i tried to install new firmware but still my GPS is not working. I m waiting 10-15 min. at clear area but nothinp happens, all satellites r red . I asked a solution from seller but he didnt help me. Please help me friends, i can't use my item .

Edit: sry for my bad English.

Have used many Chineese GPS radio with no problem.
What brand it is?

Do you still have the original software provided with it? If yes, just copy your old sys.txt file and save folder back to your new iGO and try it.

Let me know.

is there a way to let Igo automatically pick the right resolution from data file ALWAYS

Can anyone alse tell me if their "Road Signs" on A roads in the U.K are shown in Blue, I know the Motorway ones should be blue but the A roads were green in earlier versions I do not know if the skin I am using has changed thing?

Add these lines to your sys.txt:
[code][feature]
signpost_coloring=1

OHH....!! I got confused (thought he was talking about the lanes over which he is navigating on...)
And if you want to make a difference among the lanes (fast and slow ones) add what you see in red. It works even in the indication arrows showed below and above of the screen navigation.

[feature]
text_guidance=1

COOL............... !

Hi.
I have a problem with this version of Nav N Go iGO 8 R3 series - v8.3.2.83157 (Apr 3 2009).
My device is Asus A696 and I use WM 6.
now the problem is that can't open the application, meaning that when I click the "Nav N Go iGO 8" icon on my device, I can see the opening Igo 8 screen:



but as soon as I see that screen the application exits back to WM default screen, seems to be crashing or something, but absolutely not starting properly. The problem started this week and everything seemed to work perfectly until wednesday.

The sys.txt file contains the following info:

[interface]
show_exit=1

[folders]
app="%SDCARD%/iGO8"

[debug]
cache=2048
reserve_memory=2000000


Does someone have an idea how to solve this problem?
Thanks in advance.

[realbob]

Hi.
I have a problem with this version of Nav N Go iGO 8 R3 series - v8.3.2.83157 (Apr 3 2009).
My device is Asus A696 and I use WM 6.
now the problem is that can't open the application, meaning that when I click the "Nav N Go iGO 8" icon on my device, I can see the opening Igo 8 screen:



but as soon as I see that screen the application exits back to WM default screen, seems to be crashing or something, but absolutely not starting properly. The problem started this week and everything seemed to work perfectly until wednesday.

The sys.txt file contains the following info:

[interface]
show_exit=1

[folders]
app="%SDCARD%/iGO8"

[debug]
cache=2048
reserve_memory=2000000


Does someone have an idea how to solve this problem?
Thanks in advance.

HI could be lot of thins. I have been able to reproduce this bug in 3 differents ways.

1- Replaced my branding.zip file
2- Created a new sys.txt file (deleted old one)
3- Deleted everything in the save folder (do a backup before)

Hi friends, i have a serious problem. Last week i bought a chinese GPS with igo 8.0.. software and map. I installed amigo and Saturday, everything was good. But on Sunday the GPS started to can't connect to satellites. Then i installed igo 8.3... april version. I can see the GPS can find satellites, there r 6-7 satellites but they r all red, they don't turn yellow or green. I tried every baud rate and port numbers, i tried to install new firmware but still my GPS is not working. I m waiting 10-15 min. at clear area but nothinp happens, all satellites r red . I asked a solution from seller but he didnt help me. Please help me friends, i can't use my item .

Edit: sry for my bad English.

Have used many Chineese GPS radio with no problem.
What brand it is?

Do you still have the original software provided with it? If yes, just copy your old sys.txt file and save folder back to your new iGO and try it.

Let me know.

My GPS doesnt have a brand. This GPS : http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0337736634
Mine GPS has 2.11 software version, but there is new versions, 2.11.8.7.10 version, i couldnt find the new firmware. I tried reinstall 2.11 firmware and copy old save and sys.txt to new igo but it didn't work. Still it finds 5-6 satellites, all of red and don't turn green or yellow. This is the problem. I asked a solution from the seller but he doesn't help me. Please help.

Hi.
I have a problem with this version of Nav N Go iGO 8 R3 series - v8.3.2.83157 (Apr 3 2009).
My device is Asus A696 and I use WM 6.
now the problem is that can't open the application, meaning that when I click the "Nav N Go iGO 8" icon on my device, I can see the opening Igo 8 screen:



but as soon as I see that screen the application exits back to WM default screen, seems to be crashing or something, but absolutely not starting properly. The problem started this week and everything seemed to work perfectly until wednesday.

The sys.txt file contains the following info:

[interface]
show_exit=1

[folders]
app="%SDCARD%/iGO8"

[debug]
cache=2048
reserve_memory=2000000


Does someone have an idea how to solve this problem?
Thanks in advance.

i have allso a696

do like this to:

[folders]
app="SD CARD/iGO8"

My GPS doesnt have a brand.

You are wrong. Your unit has model name "NA 350 GPS" and made by Shanghai Yingxun Trading Co., Ltd.
Try to search support according this info.

Something curious - are you test GPS under "clear sky"?

Two new version is out:
iGO8_PDA_R1_Patch3_8.0.0.88902 (2009.05.22)
iGO8_PDA_R3_Patch_8.3.2.87762 (2009.04.27)
no crack at this time...

WOW Great news
If you have them send them to JetMouse to crack them

Uncracked version of iGO8 v8.3.2.87662:

Code: Select allhttp://rapidshare.com/files/238457924/iGO8_PDA_R3_Patch_8_1_.3.2.87762.rar

dansidragos

My GPS doesnt have a brand.

You are wrong. Your unit has model name "NA 350 GPS" and made by Shanghai Yingxun Trading Co., Ltd.
Try to search support according this info.

Something curious - are you test GPS under "clear sky"?

Thanks for your help, i tried 15-20 min. at clear sky, but it didnt work. The problem started after installing iGO Amigo. 2-3 times worked with Amigo then it started to doesnt connect to satellites. I edited system.ini under the save directory, i made some corrections about baud rate but still my GPS doesnt work.

I edited system.ini under the save directory, i made some corrections about baud rate but still my GPS doesnt work.

At first step - check your original shell. Possible, there is a possibility like "GPS View" or something similar. Try it.
If this utility not works - try to perform hard reset and try it again.

I edited system.ini under the save directory, i made some corrections about baud rate but still my GPS doesnt work.

At first step - check your original shell. Possible, there is a possibility like "GPS View" or something similar. Try it.
If this utility not works - try to perform hard reset and try it again.

I don't have a original shell now, so how can i perform hard reset? One of my friends said that plug out the battery and wait 10 min beacuse of cold start and plug it again but there isn't a connector on the battery, its soldered. Because of this i want to make hard reset but how? I installed new firmware already.