Hi,
I still have the Reboot at Wakeup problem on my Navigon 2100. No solution, yet?
Vampirex wrote:Hi All,
I just got a new Sony Ericsson Xperia X1 (800x480). But IGO8 doesn't seem to appreciate this screen resolution.
Could someone tell me what IGO8 version I have to use or what skin, or what I have to do to get it working on this device ?
Many thanks for helping.
BR.
you should keep an eye here http://forum.ppcwarez.org/viewforum.php?f=257 or maybe here http://forum.xda-developers.com/showthread.php?t=439162
Hi, for me (HTC Touch Pro) it doesnt work with speedmaps.. 
The program installs, but when starting, hangs on the "Initializing warning data" and all I can do is reset the device, delete the speedmaps file and then it works fine..
Does anyone know of a solution to this problem?
Thanks!
The program installs, but when starting, hangs on the "Initializing warning data" and all I can do is reset the device, delete the speedmaps file and then it works fine..
Does anyone know of a solution to this problem?
Thanks!
dudo4321 wrote:Hi, for me (HTC Touch Pro) it doesnt work with speedmaps..
The program installs, but when starting, hangs on the "Initializing warning data" and all I can do is reset the device, delete the speedmaps file and then it works fine..
Does anyone know of a solution to this problem?
Thanks!
I've got the exact same problem with my HTC DUal Touch, i even waited for over an hour once before i did a reset and still the camera's dont show???
At 'booce' any idea's mate? I installed the UK Version you uploaded with maps, TTS etc everything works fine apart from the speedcams........... By the way nice version i love the new POI icons and TTS function
hi,
i could really use some help with getting tts to work. i have the same problem as firemedic. i've scroured all the thread here but still cant seem to find the solution to the problem.
im using a hp4150 ipaq running wm2003.
i am using the sept 25th igo8 v8.3 that i copied to the memory card. (there is no igo folder in myprogram files folder), (i have never used navi software on my pda b4). the pda was hard reset before attempting to get this to work.
gathered all the misc files that i need, copied to respective folders to get it up and running. it works well enough except i cant get the tts to work.
i have replaced the .exe file with the fixed file.
i have triple checked that all tts related files are present.
when selecting a tts voice (eg. susan or kate).. all i get is a "boing" sound and thats it.. no message. when i select just voice, eg. amy, (non tts), it works fine.
is it something do to with the older ppcs? (wm2003) that may be missing some file?
there has to be a solution for this.. i just cant seem to get it.
i attached imgs of the folders in case theres something obvious i have overlooked. There are two tts and one non tts voice in thte voice folder. it didnt work with just one or any other combination either.
i do hope somebody can help me with this.... would be very appreciated.
nb. sorry about the imgs.. didnt realise image shack was beinga b***h.
i could really use some help with getting tts to work. i have the same problem as firemedic. i've scroured all the thread here but still cant seem to find the solution to the problem.
im using a hp4150 ipaq running wm2003.
i am using the sept 25th igo8 v8.3 that i copied to the memory card. (there is no igo folder in myprogram files folder), (i have never used navi software on my pda b4). the pda was hard reset before attempting to get this to work.
gathered all the misc files that i need, copied to respective folders to get it up and running. it works well enough except i cant get the tts to work.
i have replaced the .exe file with the fixed file.
i have triple checked that all tts related files are present.
when selecting a tts voice (eg. susan or kate).. all i get is a "boing" sound and thats it.. no message. when i select just voice, eg. amy, (non tts), it works fine.
is it something do to with the older ppcs? (wm2003) that may be missing some file?
there has to be a solution for this.. i just cant seem to get it.
i attached imgs of the folders in case theres something obvious i have overlooked. There are two tts and one non tts voice in thte voice folder. it didnt work with just one or any other combination either.
i do hope somebody can help me with this.... would be very appreciated.
nb. sorry about the imgs.. didnt realise image shack was beinga b***h.
dudo4321 wrote:Hi, for me (HTC Touch Pro) it doesnt work with speedmaps..
The program installs, but when starting, hangs on the "Initializing warning data" and all I can do is reset the device, delete the speedmaps file and then it works fine..
Does anyone know of a solution to this problem?
Thanks!
I have the same problem on my TyTN2
dudo4321 wrote:Hi, for me (HTC Touch Pro) it doesnt work with speedmaps..
The program installs, but when starting, hangs on the "Initializing warning data" and all I can do is reset the device, delete the speedmaps file and then it works fine..
Does anyone know of a solution to this problem?
Thanks!
No problem installing on HTC Touch Pro (ROM 1.90 ITA off.)! I used the full version (1st page) together with the autorun version (17th page "*PANDA file). The only problem is that the speedcam selection is not always shown in the settings. I had tho switch from day light to night light and sometimes it happears the right menu. If selected than it works!
ennepi wrote:dudo4321 wrote:Hi, for me (HTC Touch Pro) it doesnt work with speedmaps..
The program installs, but when starting, hangs on the "Initializing warning data" and all I can do is reset the device, delete the speedmaps file and then it works fine..
Does anyone know of a solution to this problem?
Thanks!
No problem installing on HTC Touch Pro (ROM 1.90 ITA off.)! I used the full version (1st page) together with the autorun version (17th page "*PANDA file). The only problem is that the speedcam selection is not always shown in the settings. I had tho switch from day light to night light and sometimes it happears the right menu. If selected than it works!
Tried switching between night and day mode 4 or 5 times and it still doesnt show 'enable speed cams' in the warning settings screen? Although when i select the ? that informs you what each selection does it tells you all about 'enable speed cam' function, so it should be there but isn't?
ennepi wrote:dudo4321 wrote:Hi, for me (HTC Touch Pro) it doesnt work with speedmaps..
The program installs, but when starting, hangs on the "Initializing warning data" and all I can do is reset the device, delete the speedmaps file and then it works fine..
Does anyone know of a solution to this problem?
Thanks!
No problem installing on HTC Touch Pro (ROM 1.90 ITA off.)! I used the full version (1st page) together with the autorun version (17th page "*PANDA file). The only problem is that the speedcam selection is not always shown in the settings. I had tho switch from day light to night light and sometimes it happears the right menu. If selected than it works!
I´ve tried this approach as well (combining the full version with autorun), but got the same result - it just freezes on "initializing warning data"..
I´m not sure whether the speedcam file itself is corrupt or it´s somewhere inside the release but I get it to start only by deleting the speedcam files.. Hi steevieboy4u, Glad you like my "UK Special" Igo, put quite a bit of time in on it 
I'm surprised that version's speedcams didn't work for you, as I've had no issues with them.
If I were you, I'd delete all the files in the speedcam directory, head over to the Speedcams and other files forum on this board and grab the newest "speedcam.txt" you can find. Drop that in to the speedcam dir then run Igo. It will take AGES to load up and will appear to stick on the "Init Warningn Data" message on the load screen. Leave it to do it's thing as at this point it is converting that text file in to its own speedcam database format. I have seen this take 30 minutes with a large speedcam.txt (>1MB) on slow devices so be patient. It should eventually start as normal, and the next time you launch it, it'll be back to normal speeds. You can delete the speedcam.txt after Igo has loaded and exited ok once.
Hope that does the trick for you.
asmd6230 your problem may be the DLL's you have. There is a thread in the Speedcams and Other files thread that has the correct dlls for WM2003, I would install those first. You may also want to rename or delete the btcoreif.dll file on your device's Windows directory. These files sometimes get version conflict and your device will restore the correct versions from ROM if you rename or delte the existing ones. Hope that helps.
Booce
I'm surprised that version's speedcams didn't work for you, as I've had no issues with them. If I were you, I'd delete all the files in the speedcam directory, head over to the Speedcams and other files forum on this board and grab the newest "speedcam.txt" you can find. Drop that in to the speedcam dir then run Igo. It will take AGES to load up and will appear to stick on the "Init Warningn Data" message on the load screen. Leave it to do it's thing as at this point it is converting that text file in to its own speedcam database format. I have seen this take 30 minutes with a large speedcam.txt (>1MB) on slow devices so be patient. It should eventually start as normal, and the next time you launch it, it'll be back to normal speeds. You can delete the speedcam.txt after Igo has loaded and exited ok once.
Hope that does the trick for you.
asmd6230 your problem may be the DLL's you have. There is a thread in the Speedcams and Other files thread that has the correct dlls for WM2003, I would install those first. You may also want to rename or delete the btcoreif.dll file on your device's Windows directory. These files sometimes get version conflict and your device will restore the correct versions from ROM if you rename or delte the existing ones. Hope that helps.
Booce