What is wrong the the roundabout cam in igo8?
You can set it to your own taste.

Check [roundaboutcam] here: viewtopic.php?p=369580#369580

It has been in igo8 for a long time.

Cheers

tweakradje,

Thanks for your reply. There is nothing wrong with roundaboutcam.
That's an excellent topic and will prove very useful, however, roundaboutcam is not what I am referring to.

What I mean is that iGO8 has a blue circle in the top left of the navigation screen representing a roundabout with a number in the centre representing the exit eg 2.
Amigo on the other hand now displays a graphical representation of the roundabout indicating all exits and overlays a path around the roundabout leaving at the relevant exit. It may well be the 2nd exit but may be all the way around the roundabout. Also the exit number is displayed in the centre as before.
This is much improved on iGO8 and is representative of the actual layout of the roundabout.

Hope this explains it better.
I hope to see this added to iGO8 soon

Regards
dredger

Yes you can. Do the following in DATA.ZIP:ui_igo8\common\ui\favorite.ui

Cheers

Thank you very very much Tweakradje. It works. Now i can find my favorites easy.

EXEC "mydata.favorites.sort_name"
;EXEC "mydata.favorites.sort_dist"

Thanks for finding this - I would even go one step further and add two buttons to favorite_XXX_YYY.ui:

Code: Select all<layer ui_FindFavorite z=30>
...
   <BUTTON xxx template=footer4_1a text="By Name" clickmodel="mydata.favorites.sort_name">
   <BUTTON xxx template=footer4_2a text="By Dist." clickmodel="mydata.favorites.sort_dist">
</layer>

(these will even be translated by normal LANG file)

But one should pay attention - the sorting is permanent and you cannot restore the unsorted order!
Therefore it could be better to do this in a two-step procedure with a warning...

Furthermore this also affects the HOME & WORK buttons introduced in some scripts, as they always display the first one or two favorites!

[Kitzie]

tweakradje,

Thanks for your reply. There is nothing wrong with roundaboutcam.
That's an excellent topic and will prove very useful, however, roundaboutcam is not what I am referring to...............

With iGO8 R3, the new Dimka Tomsoft v1.1.24c skin has a clever little 2D that shows up roundabouts nicely. The 2D window appears as you approach the next turn point.

EXEC "mydata.favorites.sort_name"

Furthermore this also affects the HOME & WORK buttons introduced in some scripts, as they always display the first one or two favorites!

Correct, i named my HOME & WORK AAHOME & AAWORK. Easy

Hello all. I have a big problem on my HD: I cannot type a word for finding address, or poi. Each time i want to type a word, it's typing by himself a letter, and i cannot type another one, or deleting that allready typed, 'cause is typing again by himself.

tweakradje,

Thanks for your reply. There is nothing wrong with roundaboutcam.
That's an excellent topic and will prove very useful, however, roundaboutcam is not what I am referring to...............

With iGO8 R3, the new Dimka Tomsoft v1.1.24c skin has a clever little 2D that shows up roundabouts nicely. The 2D window appears as you approach the next turn point.

hello, can you guide here how to get the new Dimka Tomsoft V1.1.24c Skin you refer here, i can not find it any where.. thks in advance

Looks like Minimapenabled command

tweakradje,

Thanks for your reply. There is nothing wrong with roundaboutcam.
That's an excellent topic and will prove very useful, however, roundaboutcam is not what I am referring to...............

With iGO8 R3, the new Dimka Tomsoft v1.1.24c skin has a clever little 2D that shows up roundabouts nicely. The 2D window appears as you approach the next turn point.

EXEC "mydata.favorites.sort_name"

Furthermore this also affects the HOME & WORK buttons introduced in some scripts, as they always display the first one or two favorites!

Correct, i named my HOME & WORK AAHOME & AAWORK. Easy

I did not see this problem. Home and Work are always the first two.

Did you set in SYS.TXT

[interface]
use_spec_fav=1
spec_fav_count=2

Cheers

[Kitzie]

samurai08,

Courtesy of kimyaci, I found it here http://www.igo8navigation.com/?p=525

You need to register there to download anything.

Hello all. I have a big problem on my HD: I cannot type a word for finding address, or poi. Each time i want to type a word, it's typing by himself a letter, and i cannot type another one, or deleting that allready typed, 'cause is typing again by himself.

I found out where the problem is: At Device settings/Energy administration. If I'm changing something there, I cannot type anymore when i want to search for a town, etc. do you know why?

For sort buttons in Favorites ui_igo8/480_272/ui/favorite_480_272.ui:

Code: Select all   <LIST lstFF_Favorite template=tlist2 element_template="et_FindFavorite" listmodel="mydata.favorites.list">
   <TEXT xxx             template=pageindex textmodel_wstr="ui.lstFF_Favorite.page_counter">
   <BUTTON xxx template=prevpage clickmodel="ui.lstFF_Favorite.prevpage" enabledmodel="ui.lstFF_Favorite.prevpage.valid" template="slow_repeat">
   <BUTTON xxx template=nextpage clickmodel="ui.lstFF_Favorite.nextpage" enabledmodel="ui.lstFF_Favorite.nextpage.valid" template="slow_repeat">
;### added sort buttons
   <BUTTON xxx template=footer4_1a text="By Name"  clickmodel="mydata.favorites.sort_name">
   <BUTTON xxx template=footer4_2a text="By Dist." clickmodel="mydata.favorites.sort_dist">
</layer>


in SYS.TXT you need to set this for keeping Home and Work on top:

[interface]
use_spec_fav=1
spec_fav_count=2

For sort buttons in Favorites ui_igo8/480_272/ui/favorite_480_272.ui:

Code: Select all<layer ui_FindHistory z=30>
   <LIST lstFH_History template=tlist element_template="et_FindHistory" listmodel="mydata.history.list">
   <TEXT   xxx template=txt_empty  text="<No History Items>" visiblemodel="mydata.history.list.isempty">
   <SPRITE xxx template=spr_empty visiblemodel="mydata.history.list.isempty">
   <TEXT xxx               template=pageindex textmodel_wstr="ui.lstFH_History.page_counter">
   <BUTTON xxx             template=prevpage clickmodel="ui.lstFH_History.prevpage" enabledmodel="ui.lstFH_History.prevpage.valid" template=slow_repeat>
   <BUTTON xxx             template=nextpage clickmodel="ui.lstFH_History.nextpage" enabledmodel="ui.lstFH_History.nextpage.valid" template=slow_repeat>
;### added sort buttons
   <BUTTON xxx template=footer4_1a text="By Name" clickmodel="mydata.history.sort_by_name">
   <BUTTON xxx template=footer4_2a text="By Date" clickmodel="mydata.history.sort_by_time">
;   <BUTTON xxx template=footer4_2a text="Unsort"  onrelease='EXEC "mydata.history.reset_view"'>
</layer>

Nav N Go iGO 8 R3 series - v8.3.4.102680 (Aug 13 2009)

On my Touch Diamond I get this error -> failed to open file: ui_igo8_da/240x320/main_scheme.ui

Does this works with PDAs with higher resolutions ?!

First post.

NOTE: Please remove any other licenses present in your license folder as this release won't recognize them! Also only PNA (320x240 and 480x272) resolutions are included this time. For backwards compatibility with other resolutions you can still use data.zip from older versions loosing however features introduced in this version.