- Posts 6
- WRZ$
50.60
- Device SGS
- OS iOS6
- Posts 5
- WRZ$
50.50
im keep getting: "Failed to open file ui_igo8_da/240_320/main_scheme.ui exiting application."
tried to read all over the web but i cant get it to work....
anyone has an idea?
tried to read all over the web but i cant get it to work....
anyone has an idea?
- Posts 60
- WRZ$
963.00
- Device Binatone C350/X430
Most simple would be to copy the ui_igo8_da folder from data.zip to IGO main directory.
If your data.zip only contains ui_data without _da you could rename it to ui_igo8_da
If your data.zip only contains ui_data without _da you could rename it to ui_igo8_da
- Posts 5
- WRZ$
50.50
not working. same error - i even extracted ui_igo8_da into sd card...
- Posts 81
- WRZ$
108.80
Could someone explain me why when I choose truck vehicle, don't see drivers alerts llike this on my route?


- Posts 33
- WRZ$
53.10
- Device Loox N560
- OS Symbian
- Posts 21
- WRZ$
52.30
Hi grandipatenti,
You don't see driver alerts because type of alerts are not in driver alert list :
da_start_of_no_overtaking
da_end_of_no_overtaking
da_protected_overtaking_extra_lane
da_protected_overtaking_extra_lane_right_side
da_protected_overtaking_extra_lane_left_side
da_lane_merge_right
da_lane_merge_left
da_lane_merge_center
da_railway_crossing_protected
da_railway_crossing_unprotected
da_road_narrows
da_sharp_curve_left
da_sharp_curve_right
da_winding_road_starting_left
da_winding_road_starting_right
da_start_of_no_overtaking_trucks
da_end_of_no_overtaking_trucks
da_steep_hill_upwards
da_steep_hill_downwards
da_stop_sign
da_lateral_wind
da_general_warning
da_supplemental_sign_dutation
da_unnamed_23
da_end_of_all_restrictions
da_unnamed_25
da_animal_crossing
da_icy_conditions
da_slippery_road
da_falling_rocks
da_school_zone
da_tramway_crossing
da_congestion_hazard
da_accident_hazard
da_priority_over_oncoming_traffic
da_yield_to_oncoming_traffic
da_risk_of_grounding
da_sharp_curve
da_tree_overhang
Best regards,
RentiIT
You don't see driver alerts because type of alerts are not in driver alert list :
da_start_of_no_overtaking
da_end_of_no_overtaking
da_protected_overtaking_extra_lane
da_protected_overtaking_extra_lane_right_side
da_protected_overtaking_extra_lane_left_side
da_lane_merge_right
da_lane_merge_left
da_lane_merge_center
da_railway_crossing_protected
da_railway_crossing_unprotected
da_road_narrows
da_sharp_curve_left
da_sharp_curve_right
da_winding_road_starting_left
da_winding_road_starting_right
da_start_of_no_overtaking_trucks
da_end_of_no_overtaking_trucks
da_steep_hill_upwards
da_steep_hill_downwards
da_stop_sign
da_lateral_wind
da_general_warning
da_supplemental_sign_dutation
da_unnamed_23
da_end_of_all_restrictions
da_unnamed_25
da_animal_crossing
da_icy_conditions
da_slippery_road
da_falling_rocks
da_school_zone
da_tramway_crossing
da_congestion_hazard
da_accident_hazard
da_priority_over_oncoming_traffic
da_yield_to_oncoming_traffic
da_risk_of_grounding
da_sharp_curve
da_tree_overhang
Best regards,
RentiIT
- Posts 32
- Location United Kingdom
- WRZ$
443.00
- Device Acer n30, MyGuide PNA, Medion 4220 PNA
- OS WebOS
I've recently put iGO 8 on MyGuide 4200 (otherwise known as a Silverguide 4200 and various other names - basically a Malata product I think). Works fine EXCEPT that after going to standby a few times the sound goes off - sometimes after standby just once, sometimes after several cycles but eventually sound is always lost. I've disabled power management in iGO which helped (with auto shutdown it would crash completely) and have the following in my sys.txt which has delayed the problem but it still happens eventually...
[power]
powermgm_state=0
power_off_mode=0
power_off_timeout=1000
skip_resume_process=0
skip_suspend_process=0
[sound]
queue_length=200
use_os_volume=0
[debug]
mute_os_key=0
Those settings arrived at after experiments and seem to delay the problem but not stop it.
I've tried several version of 8.3, from 71348 right up to 8.3.4 with the same problem in all.
Thing is, the sound for the whole device goes - only way to restore it is a hard reset (no soft reset option). Its as though the sound driver gets stuffed or some such. Another symptom is that sometimes on resume from standby iGO freezes up - if I then go to standby again and immediately turn on again iGO wakes up - its weird
If any wiz out there can suggest something to try I'd be most grateful!
kram.
[power]
powermgm_state=0
power_off_mode=0
power_off_timeout=1000
skip_resume_process=0
skip_suspend_process=0
[sound]
queue_length=200
use_os_volume=0
[debug]
mute_os_key=0
Those settings arrived at after experiments and seem to delay the problem but not stop it.
I've tried several version of 8.3, from 71348 right up to 8.3.4 with the same problem in all.
Thing is, the sound for the whole device goes - only way to restore it is a hard reset (no soft reset option). Its as though the sound driver gets stuffed or some such. Another symptom is that sometimes on resume from standby iGO freezes up - if I then go to standby again and immediately turn on again iGO wakes up - its weird
If any wiz out there can suggest something to try I'd be most grateful!
kram.
- Posts 283
- Location Région lémanique
- WRZ$
416.61
- Device Dell Axim51V + HTC TyTNII + Touch HD
- OS Symbian
- Posts 116
- WRZ$
61.40
- Device i9200 Android 4.04 running iGO8
- OS iOS6
- Posts 116
- WRZ$
61.40
- Device i9200 Android 4.04 running iGO8
- OS iOS6
grandipatenti wrote:Could someone explain me why when I choose truck vehicle, don't see drivers alerts llike this on my route?
The alerts have to be built into the map(s) you are using. Supposedly Navteq's maps are currently better in being utilized by iGO8' driver alert (DA). However, this coding factor that is not being read correctly in TeleAtlas's maps which most likely have some built in.
As with each version of iGO8, a new item is introduced and a new flaw or wrinkle pops up. I'd be willing to bet that NavNGo is in discussion with the major map makers to better correct DA.
And, as with each map factors or alerts built into some are better than other others. Well defined cities probably would have better DA than obscure rural or not reqularly travelled roads.
I'd give iGO8 about three updates and maybe two map cycles before DA works as advertised.
iGO My Way