Oct 15th, 2009, 11:38 pm
grandipatenti wrote:Could someone explain me why when I choose truck vehicle, don't see drivers alerts llike this on my route?
ImageImage


Perhaps because you need to set this is a script:

warning.driveralert.settings.truck_policy 1

and when not truck you need to set this:

warning.driveralert.settings.truck_policy 0

Cheers
Oct 15th, 2009, 11:38 pm

The current laws of physics are like half the alphabet.
Nice words can be made but we are missing the story.
Oct 15th, 2009, 11:42 pm
kram wrote:I've recently put iGO 8 on MyGuide 4200 (otherwise known as a Silverguide 4200 and various other names - basically a Malata product I think). Works fine EXCEPT that after going to standby a few times the sound goes off - sometimes after standby just once, sometimes after several cycles but eventually sound is always lost. I've disabled power management in iGO which helped (with auto shutdown it would crash completely) and have the following in my sys.txt which has delayed the problem but it still happens eventually...

[power]
powermgm_state=0
power_off_mode=0
power_off_timeout=1000
skip_resume_process=0
skip_suspend_process=0
....
kram.


Try this in SYS.TXT

[modules]
;### might help suspend/resume problems
;IPOWER_DRIVER="PDA_POWER_DRIVER"
;IPOWER_DRIVER="WINCE_POWER_DRIVER"
;IPOWER_DRIVER="PASSIVE_POWER_DRIVER"
;IPOWER_DRIVER="NULL_POWER_DRIVER"
;IPOWER_DRIVER="UNIHAM_POWER_DRIVER"
;IPOWER_DRIVER="UNIDEN_POWER_DRIVER"
;IPOWER_DRIVER="MAPTRAX_POWER_DRIVER"
;IPOWER_DRIVER="HAWK_POWER_DRIVER"
;IPOWER_DRIVER="ALPINE_POWER_DRIVER"

And remove ; from one of them at the time.
I have not tested it but it may work.

Cheers
Oct 15th, 2009, 11:42 pm

The current laws of physics are like half the alphabet.
Nice words can be made but we are missing the story.
Oct 16th, 2009, 8:28 am
Hi,

Regarding TRUCK Navigation Maps:

http://www.navmart.com/

Most of Truck Navigation Software use NAVTEQ TRANSPORT MAPS

IGO ENGINE - BECKER and IGO
TOMTOM
GARMIN
COPILOT-PCMILLER
MAP&GUIDE
MAPFACTOR
......

Best regards,
RentiIT
Oct 16th, 2009, 8:28 am
Oct 16th, 2009, 8:56 am
Is there anywhere Becker Z302.
Oct 16th, 2009, 8:56 am
Oct 16th, 2009, 10:27 am
tweakradje wrote:Try this in SYS.TXT

[modules]
;### might help suspend/resume problems
;IPOWER_DRIVER="PDA_POWER_DRIVER"
;IPOWER_DRIVER="WINCE_POWER_DRIVER"
;IPOWER_DRIVER="PASSIVE_POWER_DRIVER"
;IPOWER_DRIVER="NULL_POWER_DRIVER"
;IPOWER_DRIVER="UNIHAM_POWER_DRIVER"
;IPOWER_DRIVER="UNIDEN_POWER_DRIVER"
;IPOWER_DRIVER="MAPTRAX_POWER_DRIVER"
;IPOWER_DRIVER="HAWK_POWER_DRIVER"
;IPOWER_DRIVER="ALPINE_POWER_DRIVER"


Thanks tweekradge, I'll play with those and see what happens.

kram.
Oct 16th, 2009, 10:27 am
Oct 17th, 2009, 12:40 pm
Hi Expert
I have problem with 8.3.2.95797 version using skin GJ6.9.2p (DVS1&gurjon)
No speed camera beep warning oonly icon alerts flash up on the screen.
I got the check mark on Speed Camera Warning... Visual warming for no tick, everytime, I put the tick on Visual warming, and it doesn't get save. No button in alert setup
Any suggestion ? I need help...
Thank you
Oct 17th, 2009, 12:40 pm
Oct 17th, 2009, 1:06 pm
[warning]
speedwarn_alt_builtup_based=1
speedcam_visualtype=2
speedwarn_tolerance=100
speedcam_enabled="1"
speedcam_warning="1"
pedestrian_warning="1"
speedlimit_warning="1"
speedlimit_warning_voice="1"
speedwarn_toltype="0"
speedwarn_alt_toltype="0"

What is the meaning for "1" ? does it mean "Yes"
as for "0" meaning "No" ?

I am trying to understand the sys.txt content, any advice ?
Oct 17th, 2009, 1:06 pm
Oct 17th, 2009, 2:30 pm
Hi,
Do you have a map of Brazil for IGO 8.3.x?
Thanks,
Yuri
Oct 17th, 2009, 2:30 pm
Oct 17th, 2009, 11:35 pm
bad-sector wrote:im keep getting: "Failed to open file ui_igo8_da/240_320/main_scheme.ui exiting application."
tried to read all over the web but i cant get it to work....
anyone has an idea?

can't find any sollotion including what u guys wrote, any chance of help?
Oct 17th, 2009, 11:35 pm
Oct 18th, 2009, 12:24 am
bad-sector wrote:
bad-sector wrote:im keep getting: "Failed to open file ui_igo8_da/240_320/main_scheme.ui exiting application."
tried to read all over the web but i cant get it to work....
anyone has an idea?

can't find any sollotion including what u guys wrote, any chance of help?

Try to replace this line from the sys.txt

[folders]
app="%SDCARD%/iGO8.3"
Oct 18th, 2009, 12:24 am

Enjoy,
Oct 18th, 2009, 4:24 am
Take that section out all together. You find find it may work.
Oct 18th, 2009, 4:24 am

Bruthen Bakery. Best bakery in Australia
My Backup Site
http://www.fixmygps.net/forum
Oct 18th, 2009, 1:41 pm
kram wrote:
tweakradje wrote:Try this in SYS.TXT

[modules]
;### might help suspend/resume problems
;IPOWER_DRIVER="PDA_POWER_DRIVER"
;IPOWER_DRIVER="WINCE_POWER_DRIVER"
;IPOWER_DRIVER="PASSIVE_POWER_DRIVER"
;IPOWER_DRIVER="NULL_POWER_DRIVER"
;IPOWER_DRIVER="UNIHAM_POWER_DRIVER"
;IPOWER_DRIVER="UNIDEN_POWER_DRIVER"
;IPOWER_DRIVER="MAPTRAX_POWER_DRIVER"
;IPOWER_DRIVER="HAWK_POWER_DRIVER"
;IPOWER_DRIVER="ALPINE_POWER_DRIVER"


Thanks tweekradge, I'll play with those and see what happens.

kram.


OK. Don't forget the feedback. It may help others.

Cheers
Oct 18th, 2009, 1:41 pm

The current laws of physics are like half the alphabet.
Nice words can be made but we are missing the story.
Oct 18th, 2009, 5:12 pm
dii80_67 wrote:
bad-sector wrote:
bad-sector wrote:im keep getting: "Failed to open file ui_igo8_da/240_320/main_scheme.ui exiting application."
tried to read all over the web but i cant get it to work....
anyone has an idea?

can't find any sollotion including what u guys wrote, any chance of help?

Try to replace this line from the sys.txt

[folders]
app="%SDCARD%/iGO8.3"




i also got this error message
this way doesnt help..has anyone an another idea?
Oct 18th, 2009, 5:12 pm