How somebody can find something when there are so many pages
don't u think anybody will be happy to find the info they seek on one page.
if u think it's right to make a page with "Latest GPS Navigation Software Releases"
so it has to be one page with links and not one page with links to 456 pages for one software
as it says on the movies :

ALL THE LINKS ARE IN THE FIRST PAGE OF THIS TOPIC...THEY CONTAIN THE LATEST GPS NAV SOFT... So the info is on 1 page. Half of the remaining 456 pages are full of people asking where they can find links to the software, where they can find the maps etc...then the other remaining half are real guestions/problems and answers to/from people concerning this software...

And a high proportion of the latter is people quoting quotes of quotes for no other reason than because they can especially when they are replying to the post immediately above theirs

tnx too fast answer i downloaded igo from dii80_67 website iGO8.3.4_117940_DA_Full_Resolution i works fine but it is tilted to the left off screen
i have a mio c210 any sugestions ?

tnx birger

Adjust the screen resolution from sys.txt

[rawdisplay]
screen_x=320
screen_y=240

iGO8.3.4_117940_FullResolution_480_800 kit
http://www.filefactory.com/file/a2cb...on_480_800.zip

English TTS ready, including Europe speedcams and Skins. Also 3Dcars!
No voices, languages, maps, building, POI files present, but contains basemap and files for Hungary.
New Color Schemes, based on GJ, Data & Branding FullResolution, modified GFX for High Resolution
Tested on 320x240, 240x400, 400x240, 480x234, 480x800, 800x480.
Modify in sys.txt the resolution according to your device !!


All credits to D.I.I.!!

Megaupload mirror


all licenses for driver alerts : http://www.megaupload.com/?d=ID59TBA1

8.3.4.117940KIT800_400 http://www.megaupload.com/?d=L8EZ4HW7
content: only English voices (also TTS) and language, basemap
goodies : Gurjon 6.14 skin, 3D cars,mapchanger, ....

GREAT POST.. I SPENT HOURS LOOKING FOR WHAT YOU GUYS PUT TOGETHER HERE.. APPRECIATED!!!!

The main link, posted before is inactive.
You could try these link:

iGO8.3.4_117940_DA_Full_Resolution
http://www.filefactory.com/file/a2haf6d ... lution.zip

or

http://www.filefactory.com/file/b119304 ... 80x800.zip

Hello to everybody,

please give me some help in order to fix my 3d cars image on my GPS.
I have a 2 DIN car DVD (with touchscreen) which use Nav N go 8.3.2.102680.The resolution is 480x234.I use diMkaMegaduck_1136 skin.I tried all that you wrote here regarding 3DCars.No results on my GPS. I have 3D Cars button in settings but, when I press the search button for car list, nothing happen. When the program starts (with or without route), I have a 3D white car but I can't change it.
Do you have any suggestion to solve this issue?
Thanks in advance

@SpoiledK: Simplified script to stop TF3D. It seems to work but I can't try it.

Code: Select allRegWriteDword( "HKLM","Software\Microsoft\Today\Items\TouchFLO 3D","Enabled",0 )
RedrawToday
 
RunWait "\put your memory card name here\iGO8\iGO8.exe"
 
RegWriteDword( "HKLM","Software\Microsoft\Today\Items\TouchFLO 3D", "Enabled",1 )
RedrawToday

And this other to reduce iGO8 when a call is incoming, and recover iGO when call is finished. Works for sure for HTC HD and Samsung Omnia (thanx to fraindovino):
Pay Attention: in the script the active process for phone call is named "Telefono " due to italian language of the original script, dunno how for english roms. check it yourself.

Code: Select allSetMessageFont(22)
#Screen roration in Landscape mode  (90 o 270) - 0(zero) for Portrait mode
Rotate 270 
 
# If igo was not active, launch it
If (ProcExists("iGO8.exe")=0)
        #Screen message
        SleepMessage(1,"Avvio iGO8")
        Run("\My Storage\igo8\igo8.exe")
EndIf
#With Active iGO8 check:
While (ProcExists("iGO8.exe")=1)
      #every 5 seconds
      Sleep(5000)
      #if there is an incoming call
      Call("PhoneYesNo")
EndWhile
#Closed iGO8
SleepMessage(2,"iGO8 Closed")
#Restore Portrait mode
Rotate 0
#Exit from script
Exit
 
Sub PhoneYesNo
         #Check for Active windows
         Attivo=ActiveWindow()
         #if phone is active
         If (Attivo eq "Telefono ")
              #Rotate screen in Portrait mode
              Rotate 0
              #Wait for phone calls end
              Call("WaitPhone")
         EndIf
EndSub
 
Sub WaitPhone
      #if phone call is active 
      while (ActiveWindow() eq "Telefono ")
      #wait 2 seconds
      sleep(2000)
      #and check again
      endwhile
              #When call ends  > screen message
              SleepMessage(1,"Restore iGO8")
              #Rotate screen in Landscape Mode
              Rotate 270
              #Restore iGO8
              Show("iGO 8")
EndSub

Can you please let me know where to put the script in IGO8? TIA

anyone have valid data.zip and branding.zip for fuji simens pda n560
640*480 or 480*640 resloution for igo 8.3.4x
i try all day find anything but no luck

i have no idea how to install this to my HTC HD2 for tmobile. is there a complete set of instructions on how to do it? and do i have to downloaded EVERY single file on the first page? please help!

Try this KIT.
http://www.filefactory.com/file/a2haf6d ... lution.zip
or
http://www.filefactory.com/file/b119304 ... 80x800.zip
I am using it on HTC Diamond 2.
UnRAR the downloaded file and the resulted folder iGO8.3 with all it's content, copy it into Memory card of your device
You have to populate the empty folders with, maps(fbl files), dem files, POIs, buildings(3DL & 3DC) files, etc.
link's to all these into the site from my signature.
After this, go into your phone and explore the Memory card.
There you'll find the iGO8.3 folder. Inside there are a lot of exe files.
First initialization of iGO8, should be made with the file iGO8.3_64873.exe. Will take some time till igo8 start.
After first initialization, exist from iGO8 and relaunch it with any other exe file you want.


Good luck

I have latest version 117940 igo , my problem is i cannot make it show roadsigns and arrows in the lower part together

If it shows roadsign it doesnt show arrows, if it shows arrow it doesnt show roadsign.

I think others also had this problem, could anyone help me and tell me why its not working to show all together?

I have kind of a strange problem with 8.3.4. I have been using Igo8 happily through several generations. On this latest 8.3.4, I updated my map (Thailand) from the 2008 version to the new 2009 version. All functions work and the new map does have more roads and street names ( instead of "unknown road"). The problem is that it only routes any plan using the bare minimum of toll roads? The 2008 version of the Thailand map using 8.3.4 gives me all the logical routes. They are both TeleAtlas maps. I have no idea why it is doing this. Even though the new map contains more up to date street information, it is useless since it avoids all but the most necessary toll roads (it even enters some toll roads late after first routing on all possible surface roads)? I have checked every possible routing (easy,fast,scenic,etc) and all exhibit the same problem on the 2009 map.

Any idea as to how I may correct this so that I may use the new map with reasonable routing?

... The problem is that it only routes any plan using the bare minimum of toll roads? The 2008 version of the Thailand map using 8.3.4 gives me all the logical routes...

Any idea as to how I may correct this so that I may use the new map with reasonable routing?

Hi Chodi,

It sounds strange ....
Probably you did but... Did you check: Settings/Route planing/Road type Used for Route Planing ????? (I use Gurjon 6.16p_da skin and apologize in advance if you find this setting on a different location).

Good luck,
Nino.

i have a question.

iGO8.3.4_117940 does not calculate rout correctly, gives me bad directions, takes me longer way to go.
for instance:

8.3.2.90500 from Edison NJ 08837 to Paramus NJ 07652 = 34 miles and 42 min to get there. Using Garden State Parkway.

iGO8.3.4_117940 from Edison NJ 08837 to Paramus NJ 07652 = 41 miles and 1:05 to get there. When using this version, it gives me everything but garden state parkway.
I'm using same FAST calculation on both, same set up on both versions.
Im using same Navteq maps for both, the maps supported by both.

How can i fix this problem? can someone help please.

Thank you

I don't think you can 'fix' it. Different versions of iGO use different algorithms to calculate the route. Try the earlier version of 8.3.4.x and see if that is better...

Megaduck99

This was posted earlier:
[route]
slow_car_speed=60 ;(80) eta, route time calc?
slow_car_multiplactor=80 ;(80)
fast_car_speed=100 ;(130)
fast_car_multiplactor=100 ;(100)
motorcycle_speed=120 ;(130)
motorcycle_multiplactor=100 ;(100)
offroad_speed=20 ;(30)

by this man: tweakradje

DOES HELP FIX THE PROBLEM!

I TESTED IT TODAY, AND IT WORKED. I have to test it few more times on different directions.

There is another problem:

1. Backlight goes off in the middle of travel, how can this problem be fixed?

Thank you

I have inserted [Route] in the my sys and the calculation of the route it is best.
But what meaning has slow and fast_car_multiplactor ??

ORIGINAL POST

Can you please let me know where to put the script in IGO8? TIA

Don't put it into iGO, use it to actually start iGO (see the first lines to correct the path to your iGO8.EXE).