Starting with builds 64xxx the following setting along with this DATA should be sufficient:

Code: Select all[device]
type="alias_blackstone"


This preserves the possibility to switch screen orientation without modifying the SYS

Hey, thanks!!! That's exactly what I was looking for and it works perfectly, no more need for 2 separate sys.txt files!

Cheers

I've installed 8.3.2.71348 on my Mio C310x and it works beautifully.

When I tried to use the v9c version and deleted the old data.zip and branding.zip and replaced it with the new ones renamed, I get an error saying "Program application database cannot be found." It's running off of the SD card.

My sys.txt contains:

Code: Select all[folders]
app="%SDCARD%/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

[map]
2dheadup=1


I also tried:

Code: Select all[folders]
app="Storage Card/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

[map]
2dheadup=1


Same error...any advice?

Thanks.

Guys, I have the latest igo8 version and the latest modified data.zip from the forum, with the 800x480 dir, and I would like to run igo8 in the native resolution of my Touch HD but I'm not getting this right...
I usually get black bars on the sides or the display way to zoomed and cut...
Can anyone help with right sys.txt ??

I'm getting excellent results on my Touch HD with those separate sys.txts for landscape and portrait mode.

Landscape:

Code: Select all[folders]
app="Storage Card/iGO8"

[interface]
show_exit=1
skin="ui_igo8"
resolution_dir="800_480"
maxzoom2d=6000000
screen_x=800
screen_y=480
vga=1
shutdown_time=0
mapfontscale=200

[device]
sdcard_dsk_num=7

[map]
3d_max_tiltlevel=9000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000
2dheadup=1

[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
driver="GDI"

[debug]
skip_eula=1

[msdn]
enabled=0

[power]
skip_resume_process=1
skip_suspend_process=1

Portrait:

Code: Select all[folders]
app="Storage Card/iGO8"

[interface]
show_exit=1
skin="ui_igo8"
resolution_dir="480_800"
maxzoom2d=6000000
screen_x=480
screen_y=800
vga=1
shutdown_time=0
mapfontscale=200

[device]
sdcard_dsk_num=7

[map]
3d_max_tiltlevel=9000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000
2dheadup=1

[rawdisplay]
highres=0
screen_x=480
screen_y=800
class="portrait"
driver="GDI"

[debug]
skip_eula=1

[msdn]
enabled=0

[power]
skip_resume_process=1
skip_suspend_process=1

As I was pointing out some posts earlier, I can't get changing between landscape and portrait modes from the UI working; that's why I have 2 sys.txt files. But otherwise, everything works and looks excellent with these settings.

Hope this helps!

hi
I tried the landscape sys.txt and put IGO in landscape mode in the GUI.
Unfortunately it remains in portrait... is there another thing to do?
Thanks!!!

I've installed 8.3.2.71348 on my Mio C310x and it works beautifully.

When I tried to use the v9c version and deleted the old data.zip and branding.zip and replaced it with the new ones renamed, I get an error saying "Program application database cannot be found." It's running off of the SD card.

My sys.txt contains:

I had the same issue until I put data.zip in my HTC touch hd memory drawer: /IGO8
Then it was solved!
I removed also the following:
[folders]
app="Storage Card/iGO8"
for sys.txt

Good luck!

hi
I tried the landscape sys.txt and put IGO in landscape mode in the GUI.
Unfortunately it remains in portrait... is there another thing to do?
Thanks!!!

which phone/handheld are you using? touch hd?

cheers

touch hd yes,
in fact I put the device id in the sys.txt and now it's working fine!
great

touch hd yes,
in fact I put the device id in the sys.txt and now it's working fine!
great

glad to hear that! in fact, as raffke pointed out a few posts earlier, it's not necessary to have 2 different sys.txt files for portrait and landscape anymore. just follow his advice and you can change between portrait and landscape from UI.

cheers

@LZF:

Is it intended to have

Code: Select all[interface]
shutdown_time=0


In your DATA.ZIP?

I think it is better to leave this at default and let the user decide to add this to his SYS.TXT if needed...

PS: I found this, because I added the option to change this in my skin, but it is restored after each restart, if it is set in igo8_general.ini.

Resolution 416_234 for 8.3.2.xxxx does not exist?

Starting with builds 64xxx the following setting along with this DATA should be sufficient:

Code: Select all[device]
type="alias_blackstone"


This preserves the possibility to switch screen orientation without modifying the SYS

Thanks, that tip should be in 1st page.
Donate 10

Do these files (Data & Branding) work on 7" screen PNAs?

Hello everybody!

I have a problem with Igo 8.3.2.64873 on my Acer N311.

I click on igo.exe , Igo start, I have the blue screen with init api... and Igo switch off...

I have already remplace the data.zip by data.zip v9c for iGO 8.3.2.64873 ~ 8.3.2.71348.

You can help me? Thanks...

[whiteghost]

Big10

using it now on my 7" pna WinCE !@@!

All is OK..

Do these files (Data & Branding) work on 7" screen PNAs?

Screen size does not matter, resolution is important.What is your resolution ?

These do usually use 480x234 - so according to whiteghost (and many others), it works just fine!