Hy guyz!

i am having one small problem:

I installed amigo last week and it worked perfectly without any hitch. Since yesterday it's been behaving strangely. Whenever i plan a route it always does not pick up my current location, rather location in a different country like paris , but i live in berlin. The gps signal seems to be ok but it picks wrong current location...

Does anybody know what the problem could be?

Secondly concerning the dj-settings in sys.txt: is this the right way it should be entered in:
"[dj_settings]
dj_smart_tilt_off="1"
dj_map_tilt_in="8100"
dj_start_state="1"
dj_show_second_turn="1"
dj_show_current_speed="1"
dj_show_speed_limit="1"
dj_overspeed_beep_on="1"
dj_overspeed_beep_mod="3"
dj_overspeed_beep_off="1"
dj_overspeed_beep_snd="!alert2"
dj_speedcam_beep="1"
dj_speedcam_on_snd="!checkon"
dj_speedcam_off_snd="!checkoff"
dj_show_comapass="0"
dj_show_comapass_destination="0"
dj_hide_hand_on_map="0"
dj_gps_satellites_in_view="1"
dj_show_hause_number="1"
dj_long_press_menu="2"
dj_change_butt1="1"
dj_change_butt2="1"
dj_change_butt3="1"
dj_curr_spee_trans="22"
dj_menu_but_trans="22"
dj_info_but_trans="22"
dj_dir_bar_trans="22"
"

Thx

Ok. Without any explanation it starts picking up my correct location!

works fine on my HTC Touch Diamond. In addition to poi_visacr.txt to be copied in the save folder, don't forget to install the "Becker" license as well.

That's what I did but it doesn't work...
When I go in Settings, Content, Places, I've got a message with an error of version of my poi France1.poi and France2.poi

I think that your POI files are too old. Just look for a newer version to replace your current ones.

I have one problem. Why amigo dont show any 3d building?

Reinstall your datazip by the original again & delete your system.ini file. Once, I had the same problem & after that was solved.
(Supposing you have your .3dl & .3dc files needed in your building folder, haven´t you?)
I have three .3dc & .3dl files (six in total) from diferent versions (renaming them) of buildings and see the most quantity of buildings that could appear on the screen. The mixture includes buildings of Teleatlas & buildings of Navteq files and its the same. There is no problem they complement themselves (I have checked it)

Cheers....................

I modified some old schemes to work with amigo (Closed Filehost) https://ul.to/uavjch

[thomy444]

Works perfect on my Mio C320b, with TTS and TMC. Sometimes a little bit slowly in the graphic, but ok.
TTS stutter only , if a manouver and a "speedlimit warning" came at same time.

A big thanks to the SUPER-TEAM.

Try also on my ASUS P320... but there is not enough memory... before with IGO8 also.
On C320 Amigo use 35 MB, But the ASUS have only 25 free. The funny thing.. OCN8 is running on my ASUS.

Again thanks... I know a lot of friends, they want not use a navigation with too much feature.
I like the style, but miss some information (speed, a TMC list).

In the moment I dont try with skins, just give me time to test the original software.

A little bug in skin dimka 014...
Calculate rute... put in mode demo, next button "fly mode", increase the speed.. the information up to the speed is correct. down is incorrect.

Sorry for my english.

Well data.gro v.1.0 with new 240*240 resolution is ready.
Also included original resolutions 240*320 , 320*240 , 480*272 , 480*234

The keyboard bug is fixed for all languages I have


Download instructions:

Code: Select allhttp://www.rapidspread.com/file.jsp?id=6xbvlsusvd

Bonus pack:
diMkaWertVRV_A012 skin with added 240*240 resolution
Also included original ones: 320*240 , 480*272 , 480*234


Download instructions:

Code: Select allhttp://www.rapidspread.com/file.jsp?id=qcluwxspjs

Happy Easter

But stil no 240x320 dimka skin

Hi Chaps,

I have looked at Amigo and it has a lot of good features. The one that intrigues me the most is the improved roundabout graphic handling over iGO 8.x.x.

I don't mean the roundabout cam, I mean the graphical symbol for your next manoeuvre.

It has a much more accurate graphical representation of the roundabout and exit number instead of just the exit number.
This is much better than previous attempts and is similar to the Navigon method.

What would be awesome is if the code (and maybe graphics) for the roundabout mechanism could be ported to iGO 8.x.x. This would make iGO 8.3.1 pretty much perfect.

Is this possible and could it work?
I hope a Guru will look into this... thanks.

Regards
dredger

@ bobby2005
Many thanks for diMkaWertVRV_A012 skin
Works very well in 320*240. Now I'm waiting for 240*320 ...
Best regards

Well data.gro v.1.0 with new 240*240 resolution is ready.
Also included original resolutions 240*320 , 320*240 , 480*272 , 480*234


Happy Easter

We appreciate what you do, we're very helpful.

We are most grateful

Happy Easter!

NEED SOME HELP boys......!!

Igo Amigo is good in general terms, we all agree but, nobody named a big detail;
What about the sky!? as I could test there is no way to fix the angle of the camera when you are navigating (as Igo8 does). You can do it clicking on the hand icon & playing with the arros showed but when you go back & go on navigating returns back to the awful way of TOMTOM navigation with min & maxzoom everytime so you hardly appreciate the sky ( no sky & no themechanger). Just Im talking about default skin maybe with the new Dymka skin is posible (I could not taste, I have an omnia pda).

So what I tried is to fix the camera zoom staticly in a way that you could appreciate the sky all the time (3/4 parts of screen). I only managed to see a static cenithal view of the route (with no zoom) by changing these values in the following parameters of the data;

ui_igo_easy/400_240/skincfg

[map]
3d_max_tiltlevel=300
3d_min_zoomlevel=30
3d_max_zoomlevel=100
3d_max_zfar=14

But I just wanted the contrary effect (fix 3/4 parts of the screen with no zoom at all for seeing the sky all the time).
May I worked the mistaken parameters? I changed values several times but with no results.

Any idea of you expert guys!!??

Thanks to all in advance,

grijamor

grijamor... I tried the same thing last night on my c320, but it didn't change the angle while just looking at the map screen. It did change the angle on which I see the sky when tapping the little hand and then looking up. I ended up with all sky. I then lowered the values and ended up with less sky. Now, the problem is as you stated, where once you hit done and go back to the navigation screen, the angle returns to the default. I am sure there is a way to change the angle during navigation and have it stick, but I think we are looking in the wrong spot. I don't think it will be simple lines added to the settings.ini or sys.txt, but instead will need to be adjusted somewhere else in the program. I just haven't found where yet. I'll look more into the program itself later tonight and if I can find anything I'll let you know... Ok, dived into the data.gro. I found these lines in the igo_easy.ini:

[map]
3d_scale_carmodel=1
3dcarsizemin=5000
3dcarsizemax=8000
3dcarsizemul=20000
building_render_distance_far_front=6.0
building_render_distance_far_back=3.0
building_render_distance_medium_front=3.0
building_render_distance_medium_back=2.0
building_render_distance_near_front=2.0
building_render_distance_near_back=2.0
popup_info=0
minimum_zoom_amount=70
minimum_tilt_amount=70
tiltfactor=30
minimum_rotate_amount=15
; Backlight level depends on time of day
; nightmode_dependent_backlight=0

I am hoping editing the tiltfactor line will also change the angle of the map while navigating. I never really messed with any of the data.zip's in Igo8, so I am not sure if that will have any effect or not. I'll edit it and give it a try. I am really not interested in any of the skins as of yet, but I do have some schemes from igo8 up and going with Amigo. If I can figure out how to get the sky to show during navigation then I think I am set.

Scratch that... it doesn't work. I tried all kinds of number changes and it does nothing to the angle of the map at all.

Works perfect on my Mio C320b, with TTS and TMC. Sometimes a little bit slowly in the graphic, but ok.
TTS stutter only , if a manouver and a "speedlimit warning" came at same time.

This really blows my mind...either I don't know what to set in sys.txt ans system.ini or I'm doing smth wrong (like launch it from Total Commander).
TTS stutters like there is no tomorrow...impossible to use.

Care to share your sys.txt and system.ini b4 I give up completely

Thanks

I am really not interested in any of the skins as of yet, but I do have some schemes from igo8 up and going with Amigo.

The good thing is that I love diMka in igo8 and there is an Amigo version...you might wanna take a look. The latest version 1.14 needs a button fix...I changed mine and will post it if the author does not release 1.15.