I have problem to normaly running amigo on my mio c250. First time aplication run OK and working very good, but when I turn it off and try to run it again, aplication can`t start, it freeze on start. After hard reseting aplication don`t want run again, but when I start igo8, turn it off, and after that start amigo, then amigo start without any problem. I use igo8, Navigon and mireo viaGPS 3,0 without problem like this one. Any idea?
- Posts 110
- WRZ$
44.30
Seems to me there is a bug in 400*240 V1.4 data : When GPS is looking for a fix, you can click on the top right button to show an information message. Clicking again that button should theoricaly hide the message, but it does not work.
- Posts 13
- WRZ$
51.20
- Device bluemedia pda 255 / mio digiwalker C320tb pna
- OS Windows Mobile
tourist2 wrote:You have one symbol missing in the altkeys line. I think you skip a space where was 2 spaces in my original English QWERTY keyboard layout.
oh, this must be a bug in the board software there are 2 spaces in the altkeys line.
i've testet your qwerty keyboard layout in the newest amigo release and the same
problem, no keys are shown.....
it must be a other problem.
kr
- Posts 178
- Location Serbia
- WRZ$
70.80
- Device iPhone 3G 16GB
- OS iOS7
..::dafunk::.. wrote:Hello, I updated the DJ-DDAAXX.Amigo v 1.3 to work with Amigo 8.4.2.85182, not only the exe file, but with the "new" data.gro as well.
I updated only the resolution 480_272 because the only resolution in the data.gro is 480_272.
However I left the other resolutions inside of the skin for a future comparison.
I added to the name of the skin the "NEW" suffix, to indicate that it works with the "NEW" release of Amigo.
So, it's only working for 480_272.
DJ-DDAAXX.Amigo_v1.3_NEW: (Closed Filehost) https://ul.to/dhgew4
Thanks to Gurjon, DVS1 and DDAAXX
Yeah it works, thanks for this. I noticed that in simulation mode compass works ok. But it seems with gps signal it works wrongly. Could someone check this?
- Posts 1
- WRZ$
50.10
Hello, i have an error on my PNA (it's a no-name PNA)
SO, this is the error which occurs when i start iGO Amigo (it only loads 3 lines and the PNA is reseted)
------------------ Crash Log Begin -------------------
Current System time: "2006-12-31 22:00:16"
Build version: 8.4.2.81333
Build configuration: Product-Release
Memory Stats:
FreeMemory: 25 MB, 500 KB, 0 B
TotalUseableMemory: 35 MB, 948 KB, 0 B
MaxMemory: 132 MB, 0 KB, 0 B
ReservedMemory: 4 MB, 0 KB, 0 B
ActualCacheSize: 0 MB, 985 KB, 544 B
GarbageSize: 0 MB, 985 KB, 544 B
--------------------------------------------------------------------------
Process Name PID BaseAddr ParentPID PrioBase
--------------------------------------------------------------------------
MobileNavigator.exe 0x0f5087ee 0x10000000 0x00000000 0x00000003
--------------------------------------------------------------------------
--------------------------------------------------
Modules Name BaseAddr BaseSize
--------------------------------------------------
toolhelp.dll 0x03da0000 0x00005000
coredll.dll 0x03ee0000 0x0008b000
--------------------------------------------------
--------------------------------------------------------------
Threads TID BasePrio DeltaPrio
--------------------------------------------------------------
0x2f168002 248 0
0xef1624aa 249 0
0x4f15dc6e 251 0
0x0f15acfa 251 0
0xaf153f92 251 0
0x2f14dfb2 251 0
0x2f143c7e 251 0
0x0f139ad6 251 0
0x2f5f293e 251 0
0xcf1d7482 252 0
0xef4387b2 251 0
0x0f5084be 251 0
--------------------------------------------------------------
WinCE CallStack snapshot (function names unknown - map file \SDMMC\MobileNavigator\MobileNavigator.map not found):
0x107340bc (A)
0x107342b8 (A)
0x1073445c (A)
0x107345b0 (A)
0x10734684 (A)
0x106a0f50 (A)
0x106a08ac (A)
0x106af558 (A)
0x106ad1e4 (A)
0x1004eb28 (A)
0x1005d364 (A)
0x1068cda8 (A)
0x101413ec (A)
0x1002b16c (A)
0x1002b1e0 (A)
0x1068a950 (A)
0x1068a69c (A)
0x1068ce38 (A)
0x1068db3c (A)
0x100512fc (A)
0x1004d154 (A)
0x1004d41c (A)
0x1002aea4 (A)
0x03efde9c (A)
Global status:
bInFocus: 1
bMouseDown: 0
bInLogic: 0
bInRender: 0
CurrentState[128]:
GPS Pos: (0.000000,0.000000)
Camera: pos:(0.000000,0.000000) rot:0 persp:0 zoom:0.000000 eng=0)
------------------- Crash Log End --------------------
Please help me. Thanks !
SO, this is the error which occurs when i start iGO Amigo (it only loads 3 lines and the PNA is reseted)
------------------ Crash Log Begin -------------------
Current System time: "2006-12-31 22:00:16"
Build version: 8.4.2.81333
Build configuration: Product-Release
Memory Stats:
FreeMemory: 25 MB, 500 KB, 0 B
TotalUseableMemory: 35 MB, 948 KB, 0 B
MaxMemory: 132 MB, 0 KB, 0 B
ReservedMemory: 4 MB, 0 KB, 0 B
ActualCacheSize: 0 MB, 985 KB, 544 B
GarbageSize: 0 MB, 985 KB, 544 B
--------------------------------------------------------------------------
Process Name PID BaseAddr ParentPID PrioBase
--------------------------------------------------------------------------
MobileNavigator.exe 0x0f5087ee 0x10000000 0x00000000 0x00000003
--------------------------------------------------------------------------
--------------------------------------------------
Modules Name BaseAddr BaseSize
--------------------------------------------------
toolhelp.dll 0x03da0000 0x00005000
coredll.dll 0x03ee0000 0x0008b000
--------------------------------------------------
--------------------------------------------------------------
Threads TID BasePrio DeltaPrio
--------------------------------------------------------------
0x2f168002 248 0
0xef1624aa 249 0
0x4f15dc6e 251 0
0x0f15acfa 251 0
0xaf153f92 251 0
0x2f14dfb2 251 0
0x2f143c7e 251 0
0x0f139ad6 251 0
0x2f5f293e 251 0
0xcf1d7482 252 0
0xef4387b2 251 0
0x0f5084be 251 0
--------------------------------------------------------------
WinCE CallStack snapshot (function names unknown - map file \SDMMC\MobileNavigator\MobileNavigator.map not found):
0x107340bc (A)
0x107342b8 (A)
0x1073445c (A)
0x107345b0 (A)
0x10734684 (A)
0x106a0f50 (A)
0x106a08ac (A)
0x106af558 (A)
0x106ad1e4 (A)
0x1004eb28 (A)
0x1005d364 (A)
0x1068cda8 (A)
0x101413ec (A)
0x1002b16c (A)
0x1002b1e0 (A)
0x1068a950 (A)
0x1068a69c (A)
0x1068ce38 (A)
0x1068db3c (A)
0x100512fc (A)
0x1004d154 (A)
0x1004d41c (A)
0x1002aea4 (A)
0x03efde9c (A)
Global status:
bInFocus: 1
bMouseDown: 0
bInLogic: 0
bInRender: 0
CurrentState[128]:
GPS Pos: (0.000000,0.000000)
Camera: pos:(0.000000,0.000000) rot:0 persp:0 zoom:0.000000 eng=0)
------------------- Crash Log End --------------------
Please help me. Thanks !
- Posts 172
- Location Middle europe
- WRZ$
95.20
- Device Not Specified
KingRalph wrote:hi,
how can i make a qwertz keybord in the latest amigo language file?
this did not work in the actual language file:
[panel]
name= "German (QWERTZ)"
layer= "ui_kbd_9_9_9_5"
keys= "QWERTZUIOASDFGHJKLYXCVBNM-PÄÖÜ ß"
shiftkeys= "QWERTZUIOASDFGHJKLYXCVBNM-PÄÖÜ ß"
altkeys= "789.,?!€$456:;()£¥123&#%* -0+=@"
shiftlabel= "aA"
altlabel= "@/!"
type=3
family=1
how to fix it?
kr
You have changed my keyboard from THIS! post a little bit....
I think if you will download again - you will see it works (for me at all versions from Amigo).
Regards frieda
- Posts 41
- WRZ$
64.40
KingRalph wrote:hi,
how can i make a qwertz keybord in the latest amigo language file?
this did not work in the actual language file:
[panel]
name= "German (QWERTZ)"
layer= "ui_kbd_9_9_9_5"
keys= "QWERTZUIOASDFGHJKLYXCVBNM-PÄÖÜ ß"
shiftkeys= "QWERTZUIOASDFGHJKLYXCVBNM-PÄÖÜ ß"
altkeys= "789.,?!€$456:;()£¥123&#%* -0+=@"
shiftlabel= "aA"
altlabel= "@/!"
type=3
family=1
how to fix it?
kr
You have to use "ui_kbd_9_9_9_7" (or 7_7_7_5, 8_8_8_8)
Amigo v8.4.2.85182 (480x272) does't recognize "ui_kbd_9_9_9_5"
Try this:
[panel]
name= "German (QWERTZ)"
layer= "ui_kbd_9_9_9_7"
keys= "QWERTZUIOASDFGHJKLYXCVBNM-PÄÖÜ ß.,"
shiftkeys= "QWERTZUIOASDFGHJKLYXCVBNM-PÄÖÜ ß.,"
altkeys= "789.,?!€$456:;()£¥123&#%* /-0+=@[]"
shiftlabel= "aA"
altlabel= "@/!"
type=3
family=1
[edit: now should be ok]
- Posts 134
- WRZ$
112.00
He missed a space in the altkeys line. That is why it is not working. In a 9_9_9_5 keyboard layout, each line should have 32 characters inside quotations. It would be easier if he downloaded the lang.gro from frieda95 directly.
For the same reason, some of my QWERTY keyboard lang files are available at MegaDuck's site.
I have been using 9_9_9_5 in all my Amigo QWERTY keyboard layouts on my 480x272 GPS without any problem. I have tried that in both release of Amigo too. Besides 9_9_9_5, Amigo also accept 12_12_11_10 as in Thai, but I don't think that would work in 480x272. I have tried 9_9_9_7 in 480x272 when I was making the Portuguese keyboard and it did not work. By the way, the 9_9_9_7 layout from the post above would not work either as there is still one character missing in the altkeys line even if 9_9_9_7 is a valid layout in Amigo.
I think this is due to a problem in this forum that it automatically removes double space.
For the same reason, some of my QWERTY keyboard lang files are available at MegaDuck's site.
I have been using 9_9_9_5 in all my Amigo QWERTY keyboard layouts on my 480x272 GPS without any problem. I have tried that in both release of Amigo too. Besides 9_9_9_5, Amigo also accept 12_12_11_10 as in Thai, but I don't think that would work in 480x272. I have tried 9_9_9_7 in 480x272 when I was making the Portuguese keyboard and it did not work. By the way, the 9_9_9_7 layout from the post above would not work either as there is still one character missing in the altkeys line even if 9_9_9_7 is a valid layout in Amigo.
I think this is due to a problem in this forum that it automatically removes double space.
- Posts 41
- WRZ$
64.40
tourist2 wrote:He missed a space in the altkeys line. That is why it is not working. In a 9_9_9_5 keyboard layout, each line should have 32 characters inside quotations. It would be easier if he downloaded the lang.gro from frieda95 directly.![]()
For the same reason, some of my QWERTY keyboard lang files are available at MegaDuck's site.
I have been using 9_9_9_5 in all my Amigo QWERTY keyboard layouts on my 480x272 GPS without any problem. I have tried that in both release of Amigo too. Besides 9_9_9_5, Amigo also accept 12_12_11_10 as in Thai, but I don't think that would work in 480x272. I have tried 9_9_9_7 in 480x272 when I was making the Portuguese keyboard and it did not work. By the way, the 9_9_9_7 layout from the post above would not work either as there is still one character missing in the altkeys line even if 9_9_9_7 is a valid layout in Amigo.
I think this is due to a problem in this forum that it automatically removes double space.
Unless you are using old data.gro
If new, you can't use 9_9_9_5
Please stop guessing, check keyboards_480_272.ui (like I do)
- Posts 436
- WRZ$
42.00
- Device Gizmondo
- OS iOS
Hi Jakko,
Yeah.... mine is doing the same too...
Stuttering still present (with the new voices)
Shuts down when [Reset to Defaults]
Powers off when closing the app down <forgot about that>.
* these are not moans, just mentioning the problems/symptoms *
As mentioned previously, I think these come down to it being a WinCE 4.2 device, and there are (as far as I am aware) at least a couple of different builds of WinCE 4.2, so perhaps thats why some work, and others dont....
We gotta expect some bugs, and issues, and without reporting them, then they will go undetected...
Big thanks, and patient user here.... grateful to all who have made this site, and the apps provided so great!!
Cheers,
Lister
Yeah.... mine is doing the same too...
Stuttering still present (with the new voices)
Shuts down when [Reset to Defaults]
Powers off when closing the app down <forgot about that>.
* these are not moans, just mentioning the problems/symptoms *
As mentioned previously, I think these come down to it being a WinCE 4.2 device, and there are (as far as I am aware) at least a couple of different builds of WinCE 4.2, so perhaps thats why some work, and others dont....
We gotta expect some bugs, and issues, and without reporting them, then they will go undetected...
Big thanks, and patient user here.... grateful to all who have made this site, and the apps provided so great!!
Cheers,
Lister
jakko wrote:Apart from the stuttering voices, which I had also with the previous version, I have now an additional problem with closing the application. It does a soft reset. I have an acer d100, win ce 4.2.
- Posts 126
- Location Germany
- WRZ$
87.80
- Device Not Specified
- Posts 88
- WRZ$
139.10
MultiResolution Data.gro v1.0 for v8.4.2.85182
Download instructions:
Added 320_240.
Tested with emulator
Coming soon: 240_240 , 400_240 , 416_234
Enjoy
Download instructions:
Code: Select all
http://www.rapidspread.com/file.jsp?id=ry7rabpgcxAdded 320_240.
Tested with emulator
Coming soon: 240_240 , 400_240 , 416_234
Enjoy