The same problem, with the broken sound, I have on a Myguide 3100.

Add this in the sys.txt

[project]
name="igo_easy"

[device]
type="myguide3100"

This solution is not working. The effect is that the gps receiver is not found anymore - so I cannot get a fix. The broken sound is still present.

Need help with LOOX 720
Amigo do not start up. no error message.
IGO8 V3 works.
What I can do?
Thanks,
Eli

[Twingo]

The same problem, with the broken sound, I have on a Myguide 3100.

Add this in the sys.txt

[project]
name="igo_easy"

[device]
type="myguide3100"

This solution is not working. The effect is that the gps receiver is not found anymore - so I cannot get a fix. The broken sound is still present.

Weird, this fixed my sound problem on my device. Other than that i dont know.

Any Tip to let it show [ house No. beside street name] like iGO8 ?

Need help!!!

Broken sound problem and GPS lost intermittently during driving on Mio c310 with WinCE 4.2. I already add sys.txt

[project]
name="igo_easy"

[device]
type="mioc310"

Thanks.

Igo Amigo - Igo 8.4.2.81333
+9 differents working licenses files
+ 12 Amigo Games Licenses
+ Coreplayer all resolutions avi/wmv mediaplayer in the Igo Amigo/Games menu
- Branding.gro because working without this correct too...


320x240, 240x320, 480x272


English, French, German, Hungarian, Italian Lang files
+Hungarian voices (from igo 8.3)


Ha a képernyő kezelés túl lassú, vagy hibás,
írd át a driver="gx"-et driver="gdi"-re, vagy távolítsd el teljesen
a [rawdisplay]/driver="gx" bejegyzést a sys.txt fájlból.


If the screen is too slow, or error,
change the driver="gx" to driver="gdi", or removed the
[rawdisplay]/driver="gx" rows from the sys.txt.


-------------------

sdcardpath="\" - where is your sdcard, like: sdcardpath="\" (is in your device)


If you enabled this row the igo amigo is running your INSIDE MEMORY, because
not find the sdcard, because you add a sdcard to "him" -> "\"


-------------------

- Removing my message is one thing, but by re-adding the mirror and ignoring our request, you just got yourself a nice 7 days tempban. Post locked. LZF-

Mirrors are NOT allowed for now, we want to see how popular this application is going to be, any mirrors will be removed!.

Bakker! Ott az első posztban, hogy ne csinálj mirrort, mert számolni akarják a letöltéseket! Nincs harag.

Don't mirror Dude!

Üdv/Cheers, Dokky.

I have an Invion 4V106 (wince 4.2) and installed this latest Amigo version of Igo but i am having an issue with power settings. The problem is a get a pop-up screen that says "Battery level is critically low, please recharge the battery!" The battery is in fact fully charged but the message keeps re-appearing every few seconds. If i plug in the ac power cord to my Invion, I get a pop up message "External power disconnected Automatic shutdown in process!" The original IGO8 has also NEVER been able to successfully display my battery or charging status. In IGO8 I would have a pop up message saying something about battery being critically low and it would try to auto shutdown UNLESS I added the lines "powermgm_state=0" and power_off_mode=0" to the sys.txt file in IGO8. Unfortunately, these commands have no effect with the Amigo version. I still continue to get the battery message pop up. Does anyone know how to change the way IGO or Amigo detects the battery status? Is this even an option that can be changed? Thanks in advance for any advice!!

Thanks to JM and everyone involved in releasing these softwares for us to test. And please don't let the few people who harass you about releasing software ruin it for all the other people. There will always be people who complain and act like nothing seems to be good enough but in reality EVERYONE does appreciate the time and effort you give to releasing these softwares. Thanks again!

J

Amigo skin "DJ.Amigo_v01" Thank's Gurjon, psb, DVS1 (4pda.ru)
http://rapidshare.com/files/220109103/D ... 1.rar.html
[Edit: Transfered to Collector Account]

Gurjon post from 4pda.ru (translate.google)

"DJ.Amigo_v01"
Thank you very much and psb DVS1!
This is a test version of the skin. Can ische all change.

Installation:
Pack and copy the 2 files there where the skin and ranshe! Be sure to choose the day and night, then doing manually restart the yoke.

Changes:

1.Postoyannoe display of speed and time.
A. Tap on it with the route -> set the route.
B. Tap on it with the route -> menu choice of route.
B. Long TAP -> window location.

2. Compass added.
3. Added pointers to the destination.
4. Removed a pen from the screen. Now she is on tape compass.
5. Long TAP to exit the program menu.
6. Sign of the speed limit segda shows. (in GJ)
7. Replaced all three information fields, without route for:
A. "GPS / battery"
B. "The precise GPS height"
B. Location (town)

8. In a prikrucheny two tsiferki when searching for satellites.
9. Prikrucheny number of houses. (fraction no route)
10. Info button shows or captured satellites.
11. Ubranna button "demo."
12. Adjust the transparency of buttons, menus, information, speed, top-bar bends.
13. Added choice of launch windows.
A. Standard.
B. All the time card.
V. Automat. (with a route -> site, without -> menu)

14. Added clouds.
15. Added polnotsenyy second turn.
16. Added signal speeding. (in GJ)
17. New signals the emergence / ischezaniya camera.
18. Added the ability to otkliucheniya "smartzoom" You can choose to angle the card. (only works in the real navigation)
19. Added indication Mute.
20. Allowed hard buttons to move the map.

So now the main, all settings can be controlled only through the "sys.txt".
For several reasons, firstly you do not want to touch until the design, you do not transfer settings
You can зделать more flexible.
Here are all the settings in "sys.txt":

; - dj-amigo-set settings --
[dj_settings]
--
dj_smart_tilt_off = 1; (0-2) (default 0) map smart tilt On / Off
dj_map_tilt_in = 8100; (10-8900) (default 8000) and change zoom: "[map]" section -> set key -> "3d_min_zoomlevel = 80" (10-600)
--
dj_start_state = 1; (0-2) (default 0) vybor start-okna 0-meniu / 1-karta / 2-avtomat
dj_show_second_turn = 1; (0-1) (default 0) polnocenyj vtoroi povorot
--
dj_show_current_speed = 1; (0-1) (default 0) tekusciaja skorosti
dj_show_speed_limit = 1; (0-1) (default 0) znak razreshaemoi skorosti
dj_overspeed_beep_on = 1; (0-1) (default 0) vkliuchiti signalizaciju prevyshenija skorosti
dj_overspeed_beep_mod = 3; (0-1) (default 0) 0 - 1 gudok / 1 - postojanyje gudki / 1 <... mozhno ukazyvati chislo gudkov
dj_overspeed_beep_off = 1; (0-1) (default 0) signal vozvroshenije v razreshajemuju skorosti 0-vykliucheno / 1-vkliucheno
dj_overspeed_beep_snd = "! alert2"; ( "sound file name") (default "! alert2") imia zvukovova faila prevyshenija skorosti
--
dj_speedcam_beep = 1; (0-1) (default 0) 0-Off / 1-On SpeedCam beep signal
dj_speedcam_on_snd = "! checkon"; ( "sound file name") (default "! checkon") SpeedCam on beep
dj_speedcam_off_snd = "! checkoff"; ( "sound file name") (default "! checkoff") SpeedCam off beep
--
dj_show_comapass = 1; (0-1) (default 0) kompas
dj_show_comapass_destination = 1; (0-1) (default 0) ukazateli na finish
dj_hide_hand_on_map = 1; (0-1) (default 0) ubrati ruku s ekrana / kogda esti kompas on za nejo
--
dj_gps_satellites_in_view = 1; (0-1) (default 0) pokazyvati ciferki poimanyx sputnikov
dj_show_hause_number = 1; (0-1) (default 0) nomera domov
--
dj_long_press_menu = 1; (0-2) (default 0) 0-OFF / 1-Exit / 2-Minimize
--
dj_change_butt1 = 1; (0-1) (default 0) current speed -> Altitude
dj_change_butt2 = 1; (0-1) (default 0) Speed limit -> Current position (city)
dj_change_butt3 = 1; (0-1) (default 0) gps time -> Status GPS / Battery
--
dj_curr_spee_trans = 22; (0-32) (default 22) prozrachnosti skorosti.
dj_menu_but_trans = 22; (0-32) (default 32) prozrachnosti knopki "meniu".
dj_info_but_trans = 22; (0-32) (default 32) prozrachnosti knopok "info".
dj_dir_bar_trans = 22; (0-32) (default 32) prozrachnosti verchnevo bara i ukazatelei povorotov.
; - dj - set settings --

Message edited gurjon - Today, 14:32

@rolloo

you link for download Skin now it don't work

This skin works fine. Thank you for this first skin...

First: Great work-thanks you THREE are stars
Second: TCM on Navigon 2110max with Amigo
Igo8 TCM on this machine doeas not work.
Any hint would Amigo TCM work.
Instaled on sd card, but can not see in setting any TCM option
Some lines in sys.txt?

thanks in advance

B

I got this error (failed to open: ui_igo8\480_234\main_scheme.ui)
someone who help me tks

I also have the problem that the games option/window is not showing a single game although the games have been copied to
content/games with their foldername and the license files are in the license directory.
Do you have to provide a path in the .ini file or are the games simply not showing/working in CE5 ?
Please advise.
Thanks,
Karl

This skin works fine. Thank you for this first skin...

please reupload

thank