Hum, I just woke up, and realize you share this wonderful skin.

Thanks olesko.

This kind of skin is why I nearly do not use Igo anymore

For those asking ; the zip file mainly contains DATA.GRO, no need to add a special skin.

on kimyaci site you will find the new 5.5 from Sbertaud. Enjoy

==========================
Skin Amigo Sbertaud13 V5.5 EUR 09/12/2009
Compatibility iGO Amigo v8.4.2.85182 , v8.4.2.93601 & v8.4.2.95590
Compatible Resolutions: 480x272, 320x240, 240x320 and 400x240

Eur V5.5 +

- After using the function avoid automatic return to navigation (Weego)
- Fixed bug on the arrow that had disappeared 2D/Panorama
- Fixed a bug that, when the 2D mode was used,
3D ironed each refresh of the browser screen.

Note that using the panorama mode induces the use of 3D mode.
So whether you prefer the 2D mode, do not use the panorama mode.

- You will find all files in the skin in the "Amigo" (content + data + language + + Utility Vehicles)
==========================
http://rapidshare.com/files/319787296/sk_amigo_Sbertaud13_5_5_EUR_-001.zip
http://rapidshare.com/files/319787681/sk_amigo_Sbertaud13_5_5_EUR_-002.zip
Thank Sbertaud13

awfully Sbertaud choose to join the skin and the data.gro in the same file and limit the use of third party skins. But the discussion about skins is OffTopic here.

Hi everybody,

I'm using amigo 8.4.2.95590 on my HTC HD2. Ok, I haven't tested to much at the moment, because it took nearly a week to get it work. Unfortunately, it runs only in landscape mode, not portrait. I've tried every possible setting in my sys.txt (this is, what I think, because I've studied this board during getting it to work), but always I can read, that the resolution of 480x800 isn't supported. So, the reason for this must be my data.gro, which doesn't support this resolution. Has anybody a working data.gro for using portrait mode on 480x800-screens?

Thanx

Only if you could try by stretching in the sys.txt

1.-For landscape mode:

[interface]
resolution_dir="400_240"

[rawdisplay]
screen_x=800
screen_y=480

2.-For Portait mode

[interface]
resolution_dir="240_400"

[rawdisplay]
screen_x=480
screen_y=800

And for this your data.gro should have 400x240 and 240x400 resolution

_______________________________________________

Does anybody know how to get the speedcams working.
What extension should I use and where do they go?
Using a Mio P350 pda.
Appart from that it works fine.

Is it .kml or txt file that will do it?

Hi everybody,

I'm using amigo 8.4.2.95590 on my HTC HD2. Ok, I haven't tested to much at the moment, because it took nearly a week to get it work. Unfortunately, it runs only in landscape mode, not portrait. I've tried every possible setting in my sys.txt (this is, what I think, because I've studied this board during getting it to work), but always I can read, that the resolution of 480x800 isn't supported. So, the reason for this must be my data.gro, which doesn't support this resolution. Has anybody a working data.gro for using portrait mode on 480x800-screens?

Thanx

Only if you could try by stretching in the sys.txt

1.-For landscape mode:

[interface]
resolution_dir="400_240"

[rawdisplay]
screen_x=800
screen_y=480

2.-For Portait mode

[interface]
resolution_dir="240_400"

[rawdisplay]
screen_x=480
screen_y=800

And for this your data.gro should have 400x240 and 240x400 resolution

_______________________________________________

Does anybody know how to get the speedcams working.
What extension should I use and where do they go?
Using a Mio P350 pda.
Appart from that it works fine.

Is it .kml or txt file that will do it?

Put speedcam.txt files into folder iGo8=>Content=>speedcam

my htc hd2 doesn't work. it says : "User interface resolution [800x480] is not supported or compatible skin can not be found. Exiting application."

what i must do ?

[LeSS.Cro]

1 - install Sbertaud 5.5 Skin
2 - Add in Ur Sys.txt

[interface]
resolution_dir="400_240"

[rawdisplay]
screen_x=800
screen_y=480

Work on tg01 !

Send feedback buddy !

Tks LeSS.Cro it's working great with Sbertaud 5.5 Skin

I got a problem with 8.4.2.95590 on FSC N560.
What ever I do it gives me the Out of Memory error.

My sys.txt is:

Code: Select all[project]
name="igo_easy"

[device]
type="n560"
;sdcard_dsk_num=7

[interface]
vga=1
shutdown_time=0

[rawdisplay]
highres=1
orientation_restore=1
autoconfig=1

[debug]
skip_eula=1
enable_roadshadow=1
queue_length=200
sound_q_length=250
disable_outlookpoi=1
show_oneway=1
autosave=1
max_memory=20000000
reserve_memory = 2096000
cache=16000

[gps]
port=8
baud=57600

[map]
2dheadup=1
3d_landmarks=1
3d_buildings=1
3d_buildings_distance=8000
3d_dem=1
3d_dem_detail=3
3d_roads=1
3d_tunnels=1
3d_max_tiltlevel=60000
3d_max_zoomlevel=90000
3d_min_zoomlevel=7
show_labels=1
show_oneway=1
show_blockroad=1
follow_gps=1


My Crash.txt :

Code: Select all------------------------------------------------------
------------------------------------------------------
------------------ Crash Log Begin -------------------


Current System time: "2009-12-15 11:38:08"
Build version: 8.4.2.93601
Build configuration: Product-Release

Memory Stats:

   FreeMemory: 4 MB, 464 KB, 0 B
   TotalUseableMemory: 18 MB, 600 KB, 0 B
   MaxMemory: 19 MB, 72 KB, 0 B
   ReservedMemory: 0 MB, 0 KB, 0 B
   ActualCacheSize: 0 MB, 46 KB, 914 B
   GarbageSize: 0 MB, 0 KB, 0 B



--------------------------------------------------------------------------
 Process         Name          PID       BaseAddr   ParentPID    PrioBase
--------------------------------------------------------------------------
                 AMIGO.EXE  0xcfcc1bde  0x1c000000  0x00000000  0x00000003
--------------------------------------------------------------------------
--------------------------------------------------
 Modules         Name        BaseAddr    BaseSize
--------------------------------------------------
                nnghal.dll  0x01a00000  0x00009000
              toolhelp.dll  0x0301e000  0x00004000
     shellres.dll.0409.mui  0x7ff50000  0x0002e000
              shellres.dll  0x7ff80000  0x0000f000
               compime.dll  0x037df000  0x00028000
     commctrl.dll.0409.mui  0x7ff90000  0x00002000
              commctrl.dll  0x0331e000  0x00068000
              aygshell.dll  0x03878000  0x00056000
              oleaut32.dll  0x03149000  0x0002f000
                ossvcs.dll  0x03105000  0x00044000
      coredll.dll.0409.mui  0x7ffe0000  0x00015000
                 ole32.dll  0x03178000  0x0002c000
               coredll.dll  0x03e15000  0x00087000
--------------------------------------------------

--------------------------------------------------------------
 Threads                       TID       BasePrio   DeltaPrio
--------------------------------------------------------------
                            0xed213fc2      250          0
                            0x8db5cf2a      251          0
                            0x8de58fb6      248          0
                            0xcde5849a      249          0
                            0x6de55c5a      251          0
                            0xcde50cda      251          0
                            0xcde4e642      251          0
                            0x0de44fc6      251          0
                            0xede39a42      251          0
                            0xcde2fcc6      251          0
                            0xcde2f19a      251          0
                            0x4e242416      252          0
                            0x2e48efc2      251          3
                            0xce47dc2a      251          0
--------------------------------------------------------------


WinCE CallStack snapshot (function names unknown - map file \Storage Card\amigo 8.4.2.93601\AMIGO.map not found):

0x03e30d9c      (A)
0x1c56bbc0      (A)
0x1c56bdc0      (A)
0x1c56bf64      (A)
0x1c56c0b8      (A)
0x1c4ddf54      (A)
0x1c4de398      (A)
0x1c4dd970      (A)
0x1c3625d0      (A)
0x1c3608f8      (A)
0x1c2c7424      (A)
0x1c2c6d34      (A)
0x1c29b2a4      (A)
0x1c2ad7c8      (A)
0x1c525c18      (A)
0x1c2b47f4      (A)
0x1c2b51b4      (A)
0x1c2b5040      (A)
0x1c2af290      (A)
0x1c525c18      (A)
0x1c2b4aa0      (A)
0x1c2b51b4      (A)
0x1c2b5040      (A)
0x1c53251c      (A)
0x1c569604      (A)
0x1c15e5a0      (A)
0x1c175c1c      (A)
0x1c15b520      (A)
0x1c15de50      (A)
0x1c102d64      (A)
0x1c4ee808      (A)
0x1c4eeaec      (A)
0x1c4ee250      (A)
0x1c4edfbc      (A)
0x1c4efe4c      (A)
0x1c4f0cfc      (A)
0x1c0441c8      (A)
0x1c040b6c      (A)
0x1c040df4      (A)
0x1c0249b0      (A)
0x03e3248c      (A)


Global status:

   bInFocus: 1
   bMouseDown: 0
   bInLogic: 0
   bInRender: 0
   CurrentState[128]: st_EasyRouteMenu
   GPS Pos: (26.102208,44.435691)
   Camera: pos:(26.102208,44.435691) rot:0 persp:0 zoom:400.000000 eng=0)


State queue:

0. st_EasyMainMenu
1. st_EasyFindMenu
2. st_FindAddress
3. st_EasyRouteMenu


Waypoints:

0. roadpos:(26.102181,44.435691) realpos:(26.102208,44.435691)  Name:unnamed
1. roadpos:(8.561593,47.393318) realpos:(8.561608,47.393320)  Name:Bannholzstrasse  Zurich (Zürich) 8057


Maps:

map\Basemap.fbl           ver:0x02d0 time:0x4ac3411b
map\Basemap.fbl           ver:0x02d0 time:0x4ac3411c
map\Basemap.fbl           ver:0x02d0 time:0x4ac3411d
map\Basemap.fbl           ver:0x02d0 time:0x4ac3411e
map\Basemap.fbl           ver:0x02d0 time:0x4ac3411f
map\Basemap.fbl           ver:0x02d0 time:0x4ac3411f
map\Basemap.fbl           ver:0x02d0 time:0x4ac34120
map\Basemap.fbl           ver:0x02d0 time:0x4ac34121
map\Basemap.fbl           ver:0x02d0 time:0x4ac34121
map\Basemap.fbl           ver:0x02d0 time:0x4ac34122
map\Basemap.fbl           ver:0x02d0 time:0x4ac34125
map\Basemap.fbl           ver:0x02d0 time:0x4ac34128
map\Basemap.fbl           ver:0x02d0 time:0x4ac34129
map\Basemap.fbl           ver:0x02d0 time:0x4ac3412a
map\Basemap.fbl           ver:0x02d0 time:0x4ac3412a
map\Basemap.fbl           ver:0x02d0 time:0x4ac3412b
map\Basemap.fbl           ver:0x02d0 time:0x4ac3412c
map\Basemap.fbl           ver:0x02d0 time:0x4ac3412f
map\Basemap.fbl           ver:0x02d0 time:0x4ac34130
map\Basemap.fbl           ver:0x02d0 time:0x4ac34131
map\Basemap.fbl           ver:0x02d0 time:0x4ac34132
map\Basemap.fbl           ver:0x02d0 time:0x4ac34133
map\Basemap.fbl           ver:0x02d0 time:0x4ac34134
map\Basemap.fbl           ver:0x02d0 time:0x4ac34135
map\Basemap.fbl           ver:0x02d0 time:0x4ac34136
map\Basemap.fbl           ver:0x02d0 time:0x4ac34139
map\Basemap.fbl           ver:0x02d0 time:0x4ac3413e
map\Basemap.fbl           ver:0x02d0 time:0x4ac3413f
map\Basemap.fbl           ver:0x02d0 time:0x4ac34140
map\Basemap.fbl           ver:0x02d0 time:0x4ac34141
map\Basemap.fbl           ver:0x02d0 time:0x4ac34143
map\Basemap.fbl           ver:0x02d0 time:0x4ac34144
map\Austria.fbl           ver:0x02d0 time:0x4ae59bea
map\Hungary.fbl           ver:0x02d0 time:0x4ae59cac
map\Romania.fbl           ver:0x02d0 time:0x4ae59cb8
map\Switzerland.fbl       ver:0x02d0 time:0x4ae5bee5


------------------- Crash Log End --------------------
------------------------------------------------------
------------------------------------------------------





please anyone ...

just one ideea:
try to delete this line:
autosave=1
max_memory=20000000
reserve_memory = 2096000
cache=16000

Question to HTC HD2 users ;

Is you Amigo running smoothly

[SkyRocker]

UPDATE - Nav N Go iGO Amigo v8.4.2.109504 - (Aug 27 2009)

Download Instructions:
- Download and unrar the content of the package to the root of your SD Card overwriting any files asked
- Run the application either directly from File Explorer or create a shortcut in Programs section (i.e. by using Total Commander CE)

Main iGO Amigo package (including languages):

Code: Select allhttp://www.megaupload.com/?d=PAIQ3WPQ
pass: srppcwarez

JM: Please update the 0 post!

Thanks SkyRocker !!!

UPDATE - Nav N Go iGO Amigo v8.4.2.109504 - (Aug 27 2009)

Thanks for this.
Works on Daimond2, but I still need MultiResolution data.gro for Wvga.

Edit1:
It seems to me the performace is little better. Menus are faster.