Mar 1st, 2011, 8:39 pm
This new map, supposed to work with IGO8 or it's only to primo?
Mar 1st, 2011, 8:39 pm
Mar 2nd, 2011, 8:45 am
any one from israel willing to help me out with adding maps ?
i have igo primo installed on mio moov 300 with miopocket 4
i am totally new to this and would sure use some help ....(i learn quick)
hope to get a chat with some one
Thnx and Toda !!
Mar 2nd, 2011, 8:45 am
Mar 2nd, 2011, 10:52 am
Arielo1 wrote:any one from israel willing to help me out with adding maps ?
i have igo primo installed on mio moov 300 with miopocket 4
i am totally new to this and would sure use some help ....(i learn quick)
hope to get a chat with some one
Thnx and Toda !!



you have to search over net for primo directory and sys.txt structure. you have to put file israel.fbl to : Primo\content\map on you sd card and do some other changes in sys.txt.
I does not familiar to you's device. what kind of primo ver. do you use?
Mar 2nd, 2011, 10:52 am
Mar 2nd, 2011, 12:24 pm
boris_gto wrote:
Arielo1 wrote:any one from israel willing to help me out with adding maps ?
i have igo primo installed on mio moov 300 with miopocket 4
i am totally new to this and would sure use some help ....(i learn quick)
hope to get a chat with some one
Thnx and Toda !!



you have to search over net for primo directory and sys.txt structure. you have to put file israel.fbl to : Primo\content\map on you sd card and do some other changes in sys.txt.
I does not familiar to you's device. what kind of primo ver. do you use?


first of all thnx allot for the help boris !
i installed this [Multi] iGO Primo 1.2 v9.2.1.178658 (9.2.2011)
about where to put the files that defently makes sense the only thing is i use primo with flash memoery (internal) no SD card.
my igo folder is in flash root.
i just need to know how do i edit the sys.txt file and then i am set to go?
once again thnx allot ahi!
Mar 2nd, 2011, 12:24 pm
Mar 2nd, 2011, 1:09 pm
PASARELA wrote:Israel new map+new POI for IGO8
I drive this morning without problems

Israel_83_GM_2011.01_110124.fbl
Same shit. You'll be drive with this map though year, until it freezes in the specific place.
Good luck.
Mar 2nd, 2011, 1:09 pm
Mar 2nd, 2011, 2:31 pm
Arielo1 wrote:
boris_gto wrote:
Arielo1 wrote:any one from israel willing to help me out with adding maps ?
i have igo primo installed on mio moov 300 with miopocket 4
i am totally new to this and would sure use some help ....(i learn quick)
hope to get a chat with some one
Thnx and Toda !!



you have to search over net for primo directory and sys.txt structure. you have to put file israel.fbl to : Primo\content\map on you sd card and do some other changes in sys.txt.
I does not familiar to you's device. what kind of primo ver. do you use?


first of all thnx allot for the help boris !
i installed this [Multi] iGO Primo 1.2 v9.2.1.178658 (9.2.2011)
about where to put the files that defently makes sense the only thing is i use primo with flash memoery (internal) no SD card.
my igo folder is in flash root.
i just need to know how do i edit the sys.txt file and then i am set to go?
once again thnx allot ahi!


I think it suppose to be same dir but in sys.txt you have :
[folders]
sdcardpath="flash disk root name/Primo"

if you have only one igo program it not that necessary but it will not interfere anyway.
you are first person who run it from flash memory and not sd card
Mar 2nd, 2011, 2:31 pm
Mar 2nd, 2011, 6:25 pm
I think it suppose to be same dir but in sys.txt you have :
[folders]
sdcardpath="flash disk root name/Primo"

if you have only one igo program it not that necessary but it will not interfere anyway.
you are first person who run it from flash memory and not sd card[/quote]

so after checking my sys.txt i dont have nothing with sdcardpath.
this means i can not use any maps or something ?
or should i add it by myself?
and yes i do have just igo primo nothing else then that and miomaps wich came with the device.
i am really frustrated i have been trying to sort this out for a few weeks now and nothing is working i have been reading mnay pages here but there is such a mess and there is no step by step tutorial for nothing here.
dieing to get this to work i am flying in a week and will need gps with me big time.
so nothing works not voices not program language and no map i add is being shown :((((((((
thnx again boris !
Mar 2nd, 2011, 6:25 pm
Mar 2nd, 2011, 8:28 pm
Arielo1 wrote:I think it suppose to be same dir but in sys.txt you have :
[folders]
sdcardpath="flash disk root name/Primo"

if you have only one igo program it not that necessary but it will not interfere anyway.
you are first person who run it from flash memory and not sd card


so after checking my sys.txt i dont have nothing with sdcardpath.
this means i can not use any maps or something ?
or should i add it by myself?
and yes i do have just igo primo nothing else then that and miomaps wich came with the device.
i am really frustrated i have been trying to sort this out for a few weeks now and nothing is working i have been reading mnay pages here but there is such a mess and there is no step by step tutorial for nothing here.
dieing to get this to work i am flying in a week and will need gps with me big time.
so nothing works not voices not program language and no map i add is being shown :((((((((
thnx again boris ![/quote]

Just open sys.txt in noteped and add this one by yourself probably primo can not find program path
[folders]
sdcardpath="\SD Card" ; sd card /flash name
app="%SDCARD%/iGO8" ; place were application files %SDCARD%can be change to name in register
content="%SDCARD%/content" ; place were directory content
content="\SD Card\igo8\CONTENT"

i use iGO primo v8.5.11.0 (v1.1) viewtopic.php?f=699&t=134044

try to read this http://www.navitotal.com/forums/showthr ... m-with-iGo register for it
Mar 2nd, 2011, 8:28 pm
Mar 3rd, 2011, 8:02 am
thnx again to you boris man i have wrote u a private message i hope its ok and i am not bothering you !
bless u for all the help
gonna try what u said if i only knew where to place those lines in the sys file.
meanwhile i wish u a great day !!
Mar 3rd, 2011, 8:02 am
Mar 4th, 2011, 5:54 am
some possible SYS.TXT lines


[device]
type=device name "ASUS 696"

[folders]
sdcardpath="\Storage Card\Primo" ; change as necessary
has_secondary_root=0 ; do not search for other igo8 distributions

[gps]
disable_advanced=0
port="4"
baud_rate="57600"
; default_latitude="XX.3737921"
; default_longitude="XX.9059051"
read_total_timeout=50 ;(100)
read_buffer_size=256 ;(128)
; discard_dop_level=49.0 ;?
min_distance_timestamp=3000 ;(20000)
;background_navigation=1 ;(0)

[interface]
store_demo=0 ;getsysentry
show_musicplayer=1 ;getsysentry
show_pictureviewer=1 ;getsysentry
;lmg_all_days=1 ;getsysentry
shutdown_time=30 ;getsysentry > fixed in 22jul2010 version
show_minimize=1 ;getsysentry
show_exit=1 ;getsysentry
start_navigation_time=10 ;(5) GetSysEntry
show_tutorial=1 ;getsysentry
small_build=1 ;getsysentry
extra_settings=1 ;getsysentry (0)
;start_state="st_MainMenu" ;getsysentry
vfont_enabled=0 ;.vfont files
font_quality=normal ;normal lcd lcd_v light mono
align_style=ascender ;ascender full capheight legacy
enable_stateanim=0 ;0
uieffect_enabled=1 ;1
;show_bugreport=1 ;0
;bugreport_audio=0 ;0
unreachable_viapoint_as_target=1 ;0
max_distance_for_route_to_poi=3000 ;0x2700 (2000)
;screen_snap_distance=20 ;20
;mapfontscale=100 ;100 set to 130 in skincfg.ini
;mapfontscale2d= ;
;mapfontscale3d= ;
;mapfontscale3dframed= ;
;highlighted_cityname_first=1 ;0
night_mode_altitude=1 ;0
;make_up_exonym=1 ;1
showexitnum=1 ;1
;builtin_themes= ; skin *.gro *.zip
;theme_day=
;theme_night=
use_separated_daynight_list=0 ;0
minzoom2d=50 ; (100)
;maxzoom2d=100000 ;calculated
minzoomglobe=100000 ;() 100km 2d zoom before switching to globe view
blendeffect=4 ;4
;min_doubletap_ms=
;min_doubletap_px=
;cleanup_config="config/cleanup.ini"
laneinfo_signpost_enabled=1 ;(1)
show_detailed_posinfo=1 ;0
show_tmc_config=1 ;(0)
show_gps_config=1 ;(0)
show_orientation=1 ;(0)
show_calibration=1 ;(0)
show_tmc_eventlist=1
traffic_voice_recalc=1 ;(1)
traffic_voice_trafficjam=1 ;(1)
max_flag_distance_3d = 5000 ;(-1) always show dest flag in 3d
capture_to_jpeg=1 ;(0) else bmp
highlighted_cityname_first=1 ;(0)
use_autohint=1 ;(0)
useminaspect=1 ;(0)
make_up_exonym=0 ;(1)
compass_velocity=20 ;(10)
popup_info=1
vga=0

[rawdisplay]
class="landscape"
screen_x=320
screen_y=240
autoconfig=1
highres=0

[scheduler]
disable_smooth_anim=1 ;(0)

[screen]
menu_animation=1
daymode_until_no_time_sync=1 ;(0)
;preferred_orientation=0
orientation_lock=0 ;(0)

[settings]
closed_panel="1"
closed_map="1"
congestion_map="1"
congestion_panel="1"
police_map="1"
police_panel="1"
invalid_map="1"
invalid_panel="1"
accident_map="1"
accident_panel="1"
heavy_map="1"
heavy_panel="1"
roadworks_map="1"
roadworks_panel="1"
closures_map="1"
closures_panel="1"
danger_map="1"
danger_panel="1"
weather_map="1"
weather_panel="1"

[defaults]
mainroadness=60
shortessness=50
simplificationness=40

[feature]
signpost_nightshading=1 ;(0)
signpost_coloring=1 ;(0)
tmc_event_coloring=1 ;(0)
tmc_traffic_side=1 ;(0)
tmc_show_direction_arrows=1 ;(0)
tunnel_guidance=0 ;(0) 1 causes crash

[2d]
guidancearrow_disappearlevel=600
guidancearrow_maxshift=12
minguidancearrowsize=20
minguidancearrowsize_zoomlevel=1200
maxguidancearrowsize=65
maxguidancearrowsize_zoomlevel=0

; carcenter_y=35
label_rendering_order="texts,shields,icons" ;(icons,shields,texts)
building_draw_outline=1 ;(0)
building_maxzoomlevel=500 ;(500)
draw_polygon_contours=0 ;(1)
drop_little_road_segments=1 ;(0)
show_planned_route_arrows=1 ;(1)
road_simplification_level=5 ;(5)
adaptive_2d=1 ;(1)
group_poi_icons=0 ;(1)
max_icons_shown=20 ;(30)
enable_icon_fight=1 ;(0)
use_r1_roadnames_for_r2_if_missing=1 ;(0)
traffic_lights=1 ;(0)
mincarsize=80 ;()
mincarsize_zoomlevel=2000
maxcarsize=150 ;()
maxcarsize_zoomlevel=200
min2dplannedroutewidth=5 ;(5)
render_during_animation=1 ;(0)
;loading_screen_text_color=0xFFFFFF ;(0)
;loading_screen_color=0xFFFF ;(0xFFFF)

[3d]
;### 3d landmark and buildings render distances, see also $skin$\common\clip_planes.ini
building_camera_distance_near=60 ;(100)
building_camera_distance_medium=120 ;(120)
building_camera_distance_far=180 ;(150)
show_guidance_strip=1
show_guidance_arrows=0
guidancearrow_first_size=1.5
guidancearrow_first_alpha=24
guidancearrow_second_size=0.8
guidancearrow_second_alpha=12
max_poly_segments_shown_1=400
max_poly_segments_shown_1=200

disable_car_normals=1 ; mdl surface normals discard
anti_alias_buildings=0 ;(0)
anti_alias_landmarks=0 ;(0)
anti_alias_shapes=0 ;(0)
landmark_min_brightness=300 ;(700)
max_pois=60 ;(97)
max_pois_on_horizont=12 ;(17)
use_all_building_textures=0 ;(1)
render_buildings_as_shapes=0 ;(0) buildinds (3dc) flat on the ground
roads_as_line_stripes=1 ;(1)
reduce_line_stripes=1 ;(0)
asymmetric_projection=0 ;(0)
planned_route_visible_behind_mountains=0 ;(1)
;planned_route_track_width=8 ;(10)
;planned_route_track_contour_width=1 ;(2)
;planned_route_contour_width=2 ;(4)
car_antialias_mode=edgeblur ;(supersample) edgeblur
fade_around_cursor=1 ; when click on map buildings fade
fade_distance_for_car=40 ;(20)
fade_overlap_tolerance=50 ;(32)
fade_distance_for_guidance_arrow=50 ;(50)
tmcroadthickness="0.5" ;(0)
;plannedroutethickness="0.2" ;(0)
;guidancestrip_thickness="0.2" ;(?)
;elevate_guidance_strip=1 ;(1)
;guidancestrip_elevation=0.1 ;(0.1?)
;guidance_strip_switch_distance_meter=300
;guidancestrip_startscaledist=300
;guidancestrip_stretch=25
min_camera_height=20 ;(0)
;global_ambient=0x7AE147AE ;(0x7AE147AE)
;forced_fov=50
;poi_min_lod=12 ;(11)
;use_vertex_color_triangles=1 ;(1)
cell_road_density=300 ;(400)
;road_polytrack_switch_pixelwidth=10 ;(12)
minimum_flag_distance=5000 ;(50000)
min_task_processing = 5

[3d_config]
;are the bubbles only active in navigation mode (0) or also in drag mode(1)
;roadsign_always_framed=0
;roadsign_frame_space_size=4 ;(4)
;roadsign_font_size=12 ;(0)
disable_roadsign_navigation_mode=0 ;(0)
navi_mode_roadsign_dist_limit=800 ;(0)
navi_mode_roadsign_zoomdist_limit=1500 ;(1500)
;roadsign_max_refresh_time=400 ;(400)
;rotated_roadsigns=1 ;(1)
;hide_tmc_on_road=0 ;(0)
;default_label_colors=0 ;(0)

[config]
autoset2donmap=1
autoset3doncockpit=1

[smartzoom]
auto_follow_time=10
enabled=1
minzoom=60
maxzoom=170
minangle=45
maxangle=73
overview=0
overview_zoomlevel=5000
overview_distance=30000
angleoffset=8
minzoom2d=50 ; (200)
maxzoom2d=1500
zoom2dpercent=135
zoom_after_find=1
use2d=1
zoom_after_find=1

[camera]
; common settings
maxdistance=100000
; 2D settings
minzoom2d=200
maxzoom2d=1500
defaultzoom2d=1200
; 3D settings
minzoom=30
maxzoom=150
defaultzoom3d=50
minangle=10
maxangle=85
defaultangle=70
angleoffset=40
;### test
overview_enabled=1
overview_distance=5000
overview_zoom2d=2000
overview_zoom3d=500
overview_angle=30
;### test
speedzoom=1
speedzoom_use_minmax=1
speedangle=1
speedangle_use_minmax=1
lowspeed=-50
highspeed=50
;### test
zoom_tilt_percentage=70
;close smartzoom
;[camera1]
;normal smartzoom
;[camera2]
;far smartzoom
;[camera3]
;close smartzoom - signpost
;[camera11]
;normal smartzoom - signpost
;[camera12]
;far smartzoom - signpost
;[camera13]

[roundaboutcam]
enabled=0 ;(1)
centery=20 ;(50)

[camera.roundabout]
enabled=0 ;(1)

[camera.intersection_zoom]
enabled=1

[itiner]
handle_via_passing_as_destination=0 ;(0)
remove_reached_destination=0 ;(1)
pass_destination_radius=200 ;(0)
pass_destination_distance=50 ;(0)
pass_via_distance=100 ;(0)
show_prev_manuevers=1 ;(0)
show_only_till_next_viapoint=0 ;(0)
show_only_ahead_of_car=1 ;(0)
displayed_warnings="1,2,3,4,5,6,7,8,9,10,11,12,13, 14,15,16,17" ;(1,2,3,8,9,10,11,12,13,14,15,16,17)

[kml]
default_icon=1

[loading]

[local]

[map]
2dheadup=1
3d_landmarks=1
3d_buildings=3
3d_buildings_distance=20000
3d_dem=1
3d_dem_detail=3
3d_roads=1
3d_tunnels=1

set_max_bubble_labels=8 ;(5)
3d_scale_carmodel=1 ;(1)
;3dcarsizemulwithfov=0 ;(0)
3dcarsizemin=6000 ;(10000)
3dcarsizemax=18000 ;(28000)
3dcarsizemul=30000 ;(40000)
3d_max_tiltlevel=8000 ;(7800)
3d_default_tiltlevel=7800 ;(7800)
zoomlimitedtilt=0 ;(0)
3d_min_zoomlevel=20 ;(30)
3d_max_zoomlevel=200 ;(600)
3d_max_zfar=64 ; still used?
minimum_3d_zoom_percent=100 ;(100)
tiltfactor=50 ;(150)
zoomfactor=1.05 ;(?)
rotfactor=20 ;(10)
max_road_segment_count=1200 ;(2000)
sieve_mode=1 ;(1)
housenr_corner_offset=0 ;(0)
shade_factor_min=0.5
shade_factor_max=1.3
3d_brunnel_tunnel_shutdown=5
;poi_iconid_near=1 ;(1)
;poi_iconid_distant=0 ;(0)
;poi_distant_distance=2000 ;(3000)
;poi_grouping_distance=3000
;speedcam_visibility=2500 ;(2500)
;car2wp_as_route=1 ;(1)
;speedwarn_icon="$speedwarn.spr" ;("$speedwarn.spr") take away the first ; crash!
;tmczoommin=3000 ;(3000)
;tmczoommax=60000 ;(?)
;tmczoommini=30000 ;(30000)
;tmczoomsmall=8000 ;(8000)
;3d_tmc_road_extra_width=0 ;(0)
;auto_nightmode=1 ;(1)
;nightmode_dependent_backlight=1 ;(1)
raster_in_2d=0 ;(1)
raster_in_3d=0 ;(0)
raster_2d_high_quality=1 ;(1)
shapes_in_2d=1 ;(1)
show_labels=1
show_blockroad=1
show_oneway=1 ;(1)
follow_gps=1
auto_set_2d_on_map=0 ;(0)
auto_set_3d_on_cockpit=0 ;(0)
poi_labels=1 ;(1)
;no_road_rotate_speed_min=10 ;(10)
enable_rotated_move=1 ;(0)
;move_zoom_divider=15 ;(15)
enable_move_cursor_on_move=1 ;(0)
;center_animation=1 ;(1)
;3d_snap_distance=50 ;(50)
;2d_snap_distance=50 ;(50)
;3d_jump_distance=500 ;(500)
;2d_jump_distance=50000 ;(50000)
;grayscale=0 ;(0)
Map_mode="3D"

[navigation]
gps_pos_to_road=1
show_current_city=1
show_countrychange=1
junction_view_at_maneuver=1
junction_view_type="NNG" ; used by UI to determine which JV type to use, other options are "NNG_NQ" or "NQ"
waypoint_radius=800 ;(300) waypoint visited if< 300 mtr?
waypoint_radius_multiplicator=1 ;(1)
track_simulation_speed=5 ;(3)
;onlyguidancetime=5 ;(0) skip to secs before next maneuvre
;onlyguidancedist=500 ;(100) when simulate skip to distance before next maneuvre
autoreplan_action=AUTO ;(AUTO)
pedestrian_pos_filter_enabled=1 ;(1)
slowspeed_time=5 ;(5)
slowspeed_limit=5 ;(5)
show_city_in_next_street=1 ;(1)
show_city_in_next_street_distance=1000 ;(1000)
junction_view_at_maneuver=1 ;(1)
junction_view_on_highways_only=1 ;(1)
junction_view_distance=150 ;(200)
junction_view_distance_ramp=300 ;(400)
junction_view_distance_highway=400 ;(800)
simple_crossborder_warning=0 ;(0)
crossborder_warning=real ;(off) simple real smart
turn_direction_ding=1 ;(0) config/turndir.csv
max_exit_number=9 ;(9)


[poi]
use_multi_poi_icon=0 ;(1)
;### poi_grouping_disctance etc in mapstates.ini

[default]
userpoi_has_mypoi=1 ;(0)
use_lastknowngps=1 ;(0)
; Airport, Business, Car_Dealer_Repair, Communication, Community, Finance Leisure
; Medical, Nature, Parking, Petrol_Station, Rent_A_Car, Restaurant, Shopping, Sport
; Tourist_Attractions, Transportation
sort_order="Petrol_Station,Parking,My Poi,Restaurant,Shopping,Accomodation,Medical" ;("Restaurant,Accomodation,Petrol_Station,Parkin g, Medical")
priority="Petrol_Station,Parking,My Poi,Restaurant,Shopping,Accomodation,Medical" ;("Restaurant,Accomodation,Petrol_Station,Parkin g, Medical")
sort_by_config=1 ;(0)
picturepoi_show_all_containers=1
picturepoi_has_mypicturepoi=1

[route]
planned_route_weight=0 ;(7) 0 is less nervous recalc
correctness=100 ;88
;speed_profile_weight=100 ;100
;fixed_correctness=1 ;?
slow_car_speed=60 ;(80) eta, route time calc?
slow_car_multiplactor=80 ;(80)
fast_car_speed=100 ;(130)
fast_car_multiplactor=100 ;(100)
motorcycle_speed=120 ;(130)
motorcycle_multiplactor=100 ;(100)
offroad_speed=20 ;(30)
continue_with_ferry=1 ;(0)
handle_freeway_as_highway=1 ;(0)
allow_offroad_waypoints=1 ;(0)
permit_penalty=1000 ;(0)see [truck]
charge_penalty=1000 ;(0)
toll_penalty=0 ;(0)
bridge_penalty=100 ;(0) in meters?
tunnel_penalty=200 ;(0)
low_speed_zone_penalty=100 ;(0)
uturn_penalty=2000 ;(1000)
minimum_hnr_distance_km=100 ;(100) use hnr if trip> 100 km
auto_enable_crossborder=1 ;(0)
guidance_at_highway_entry=1 ;(0)

[speedcam]
enable_at_startup=1

[speedcam_category:0]
activated_speech="U nadert Flitser!"
[speedcam_category:1]
activated_speech="U nadert Flitser!"
[speedcam_category:2]
activated_speech="U nadert Flitser!"
[speedcam_category:3]
activated_speech="U nadert Flitser!"
[speedcam_category:4]
activated_speech="U nadert Stoplicht Flitser!"
[speedcam_category:10]
activated_speech="U nadert Flitser!"
[speedcam_category:11]
activated_speech="U nadert Stoplicht Flitser!"
[speedcam_category:15]
activated_speech="U nadert betaalde zone!"
[speedcam_category:31]
activated_speech="U nadert geveerlijk punt!"

[warning]
speedcam_maxdistance_from_road=10
speedlimit_warning_visual=1
speedlimit_warning_voice=1
speedcam_enabled=1 ;(0)
speedcam_visualtype=1 ;(1)
speedcam_soundtype=1 ;(1) 1=warn if overspeed 2=approach
speedcam_soundtype_4=2 ;
speedcam_warning=1 ;(0)
;speedcam_check_frc=1
speak_tts_only=0 ; (1)
speedwarn_alt_builtup_based=1 ;(0)
speedwarn_alt_limit=1 ;(0)
speedwarn_alt_tolerance=110 ;(100)
speedwarn_alt_toltype=1 ;(0) alternative tolerance type
speedwarn_tolerance=110 ;(100)
speedwarn_toltype=1 ;(0) absolute or percentage
;speedcam sounds (tts and non tts] are in data.ziproject_config\igo9.ini [speedcam_category:X]

[warning.driveralert.settings]
max_display_count=3 ;(3)
show_timeout=10 ;(3)
show_vehicle_pictograms=1 ;(1)
preactivate_distance=100 ;(100)
;truck_policy=0 ;(0)
;show_cat=
;warn_cat=
warn_method=2 ;(2)

[mydata]
cityhistory_size=1000 ;(300)
max_quicklist=250

[mydata.smart_history]
max_smart_items=4 ;getsysentry

[mydata.tracks]

[route.histspeed]
enabled=1
show=1 ;(0)
use_timeslice=1

[route.histspeed.timeslice]
day=0
hour=2
minute=30

[sound]
sound_q_length=200
queue_length=200
;ding=0 ;no annoying announcement ding
maneuver_chimes=0 ;no annoying announcement ding
wheelsound=1
mute_os_key=1
pause_mp3_sooner=1

[sound.announcer]
gps_signal_lost=1
gps_disconnected=1

[speedcam_category:0]
activated_speech="U nadert Flitser!"
[speedcam_category:1]
activated_speech="U nadert Flitser!"
[speedcam_category:2]
activated_speech="U nadert Flitser!"
[speedcam_category:3]
activated_speech="U nadert Flitser!"
[speedcam_category:4]
activated_speech="U nadert Stoplicht Flitser!"
[speedcam_category:10]
activated_speech="U nadert Flitser!"
[speedcam_category:11]
activated_speech="U nadert Stoplicht Flitser!"
[speedcam_category:15]
activated_speech="U nadert betaalde zone!"
[speedcam_category:31]
activated_speech="U nadert geveerlijk punt!"

[strapon]
discard_state_timeout=60000 ;(30000) 60 secs
max_position_distance=800 ;(300)
min_gps_precision=50 ;(0) gps.accuracy
max_gps_precision=100 ;(0) gps.accuracy
;min_discard_prob= 0.0 ;(????)
min_distance_for_move_at_low_speed=50 ;(20)
max_speed_for_stop=2 ;(0)
min_distance_for_switch_off_stopping=50 ;(100)
min_speed_for_release_stopping_off=5 ;(10)
offroad_handling=1 ;(0)
debug_offroad_alert=0 ;(0)
disable_heading=0 ;(0)

[tts]
automatic_direction_conversion=1 ;(1)
tts_buffer=32786 ;(10240=10k) 32786=32k
tts_logics=3
priority="HIGH" ; CRITICAL VERY_HIGH HIGH NORMAL LOW VERY_LOW
always_say_road_names=3 ;(0) 1 or 2 or 3
announce_street_name=1
skip_exit_numbers=2 ; 0, 1 or 2
announce_exit_directions=1 ;(0)
supress_Prepare_to=1
supress_straight=1

[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=9
gain=12

[other.fm_transmitter]
fmtx_enabled=0 ;needs proper nnghal.dll

[modules]
IFM_TRANSMITTER="NNGHAL_FM_TRANSMITTER"
IFM_TRANSMITTER_MANAGER="FM_TRANSMITTER_MANAGER_IM P"

[tmc]
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="3"
saved_config_baud="57600"
auto_tuning="1"
saved_last_frequency="906"
saved_last_tuning_mode="1"
ignore_all_events="0"
enable_flow_icons=1 ;(0) need $traffic_speed.spr
enable_flow_events=1 ;(0) haven't seen any flowing
flow_stripe_blinking_time=1000 ;(0) in msecs
show_all_provider_list=1 ;(0)
near_provider_distance_km=100 ;(30)
auto_band_search_up=0 ;(0)
auto_tuning=1
;use_new_standard=1
ignore_sid=1

[traffic.settings]
load_default_traffic_settings=1 ;config/tmcsettings.ini
traffic_enabled=1
use_extra_setting_for_flow_events=1
use_speed_color_codes=1
;flow_speed_coloring=4
announce_recalc_on_auto_only=1
detour_acceptance_mode=2
detour_spare_time_threshold=900 ; detour if 15 minutes lost due to traffic

[tripcomputer]
num_of_trips=3

[truck]
vtr=519 ;default truck VTR
max_restriction_level=0
;### other settings
maxspeed=90
;hazmatflags=5 ;Hazardous Materials 0-6
;use=1 ;(?)
;weight="10000" ;(?)
;weightperaxle="2000" ;(-1)
;loadtype="-1" ;(-1)
;maxspeed="90" ;(?)
;length="15" ;(?)
;width="3.5" ;(?)
;height="4.5" ;(?)
;max_restriction_level="2" ;(0)
;vtr="1"
;hazmatflags="5" ;Hazardous Materials 0-6
;### see also [route] permit_penalty=2000

[default]
name="default"
length=18.5
width=2.6
height=4.5
weight=22000
maxspeed=90
actualweight=22000
axles=5
trailers=1
icon=1
hazard=-1
vtr=1

[msnd]
msnd.start=0

[phone]
driver="TAPI"
exe_path="\Windows\cprog.exe"
win_name="Phone"

[bluetooth]
send_showphoneui_on_dial=1

[power]
;skip_suspend_process_all=1 ;getsysentry
powermgm_state=0 ;(1)
backlight_day=100
Backlight_night=50
show_gps_pos=1
allow_battery_full=0

[debug]
enable_roadshadow=1
enable_buildings=1

;### this creates detailed running logfile for tts etc
;log_1="\Storage Card\igo8_primo\_debug.log::5"
disablesmartdetour=0 ;getsysentry
tmc_provider_list_plus=1 ;getsysentry
skindebug=0 ;getsysentry
showsuspendmessage=0 ;getsysentry "Back from Suspend"
usenightmode_tunel=1 ;getsysentry
petza_enabled=0 ; somethings with recording/debug?
show_battery_percent=1 ; battery level text below bat icon
experimental_features=0 ; extra settings in extra menu
;leak_check=1 ;looks like primo leaks
skip_platformlock=1 ;(0) hmmm...
skip_wce6_deviceid=1 ;(0) hmmm...
tmc_all_stations=1 ;(0)
hnr=1 ;(1) use hnr, see [route] minimum_hnr_distance_km
skip_eula=1 ;skip end user lic aggr
;show_frc=0 ;0
smart_2d=1 ;0
earth=1 ;0
show_junction_view=1 ;0 see config\junctionviewXXX.ini
show_gps_pos=1
show_signpost=1
show_oneway=1 ;0
show_oneway_3d=1 ;0
;onewayarrowmode=2
show_hnr=1
show_clipboard_path=1
show_arrows_on_route=1
show_lane_info=1
show_speed_limit=1
show_poi_areas=1 ;(0)
show_poi_boundingrects=1 ;(0)
;plannedroutethickness="0.8"
;farguidancestripthickness=2
;tmcroadthickness="0.9"
;render_without_focus=0 ;(0)
; TTS settings
tts_min_ready_wav=1 ;(0)
tts_getaway_time=400 ;(0)
tts_expected_engine_delay=1200 ;(0)
reserve_memory=2097152 ;(0) default 4Mb, don't use less that 1Mb (1mb=1048576 2mb=2097152 3mb=3145728)
;memory_low_bound=1048576 ;(0) bits? kb?
;show_performance_memory=1
;show_performance=1
monkeytest_highspeedsun=0 ;(0)
;fov=48 ;(45) affects angle/zoom bigger makes 3d car smaller

speedcam_enabled=1
autosave=1
disable_outlookpoi=1
topmost=1

[oasis]
; exclude_directories="PICTURE::%SDCARD%/,PICTURE::%myflashdisk%/"
; include_directories="PICTURE::%SDCARD%/Pictures/"

[oasis.pictures]
slideshow_time=3
slideshow_effect=1
slideshow_loop=1
loadhq=0
large_pict_size=1024

[timezone]
sync_os_timezone=1
reset_os_timezone=0

[homework]
home="WORK"
work="HOME"

[map_update_checker]
enabled=0

[other]
demo_enabled=0 ;1 No demo button in navigate
Mar 4th, 2011, 5:54 am
Mar 4th, 2011, 11:30 am
Arielo1 wrote:thnx again to you boris man i have wrote u a private message i hope its ok and i am not bothering you !
bless u for all the help
gonna try what u said if i only knew where to place those lines in the sys file.
meanwhile i wish u a great day !!


when you look at left upper corner of the map did you see small satellite with three points? what color of the points?
Mar 4th, 2011, 11:30 am
Mar 5th, 2011, 3:17 am
hi boris
where can i get a full copy of igo primo israel? i have a diamond 2 with resolution 480x800, i also have igo 8.3 on it and i know that it can be a problem and that you have to write something on the sys for it. do you think you can upload the full igo primo israel with the nesesery sys txt that will work on 480x800?
thank you.
Mar 5th, 2011, 3:17 am
Mar 5th, 2011, 10:15 am
if_petra wrote:hi boris
where can i get a full copy of igo primo israel? i have a diamond 2 with resolution 480x800, i also have igo 8.3 on it and i know that it can be a problem and that you have to write something on the sys for it. do you think you can upload the full igo primo israel with the nesesery sys txt that will work on 480x800?
thank you.


there's no such thing igo primo Israel
you need to download igo primo with data.zip for you resolution.
Map from igo 8.3 (only) work perfectly:) (unless you going to drive from tel-aviv to hifa on dereh namir)
just downlod from here: http://www.navngo.co.il/page.aspx?page_id=198 voice files
add this one for old voice file support
[sound]
csv_voice_enabled=1

for v1.1 i use same lang file from igo 8.3
but depend on data.zip some times number doesn't look pretty well
i cat not recommend primo v1.2 some old lang and voice files not working. data file to raw for me and no skins
but you have device with new=primo new resolution so:
ver 1.2 viewtopic.php?f=699&t=168869
ver 1.1 viewtopic.php?f=699&t=134044
Mar 5th, 2011, 10:15 am