bt1967,
Thanx i have tried that and it still does not work.
Its very strange because your earlier BEO skins work fine.

I have the same problem.
I have also unzipped the fonts in igo8 folder in sd card.
But I have an igo8 folder also in program files in the memory of central unit.
Do I have to put anything in there too?
Pity, cause I like that skin, BEO_35
It seems as if something is missing

I am sorry, i cannot find what is wrong, it works fine on my device. Anybody that got the skin to work besides me?

bt1967,
Thanx i have tried that and it still does not work.
Its very strange because your earlier BEO skins work fine.

I have the same problem.
I have also unzipped the fonts in igo8 folder in sd card.
But I have an igo8 folder also in program files in the memory of central unit.
Do I have to put anything in there too?
Pity, cause I like that skin, BEO_35
It seems as if something is missing

I am sorry, i cannot find what is wrong, it works fine on my device. Anybody that got the skin to work besides me?

I have no problem with your skins.

Only TTDev skin is still bothering me

bt1967,
Thanx i have tried that and it still does not work.
Its very strange because your earlier BEO skins work fine.

I have the same problem.
I have also unzipped the fonts in igo8 folder in sd card.
But I have an igo8 folder also in program files in the memory of central unit.
Do I have to put anything in there too?
Pity, cause I like that skin, BEO_35
It seems as if something is missing

I am sorry, i cannot find what is wrong, it works fine on my device. Anybody that got the skin to work besides me?

On my PNA (C210) it is working well. But there are other skins that are working for a lot of people but not for me. I did not yet understand the reason.

I have no problem with your skins.

Only TTDev skin is still bothering me

Mermigas,
what is exactly the behavior you have, and what kind of hardware are you using ?

I have no problem with your skins.

Only TTDev skin is still bothering me

Mermigas,
what is exactly the behavior you have, and what kind of hardware are you using ?

My device Ipaq rx5710
Thanks but when I change to your skin after restart / map I am getting this message

Fatal error in main thread
Address:0x00142028
Exception:0xc0000005


but I have no problem with your first release (actualy this is the one I commonly use)

I have no problem with your skins.

Only TTDev skin is still bothering me

Mermigas,
what is exactly the behavior you have, and what kind of hardware are you using ?

My device Ipaq rx5710
Thanks but when I change to your skin after restart / map I am getting this message

Fatal error in main thread
Address:0x00142028
Exception:0xc0000005


but I have no problem with your first release (actualy this is the one I commonly use)

Ok, thanks. Just to understand better, on the rx5710 which version of WM are you using?

Ok, thanks. Just to understand better, on the rx5710 which version of WM are you using?

Sorry

WM 5.0 OS 5.1.195 (build 14989.2.6.0)

hello everyone and thank you for your amazing work !

to glikogliko: I cannot use your skin since I get error messages as well ( I checked ttdev v1 : it works well on my ppc)
That's a pity since your skin seems really great. Help me please...

Samsung SGH i710 - Windows Mobile 5 - Igo 8

Hi guys,
You are first ones that report about such a problem. As you can see on the picture bellow on my FSC T830 there is no such a problem

I have no idea how to fix this problem, because I haven't such a phone to test, but I have some suggestions:
1. May be the problem is in video rendering - It is easy to understand - export folder 240_240 from data.zip and rename some of the others - for example 320_240 to 240_240. Start the program - the buttons will not fit on the screen, but you will see the quality. If it is the same, the problem is in video imaging. May be you have to free some memory, to update rom or install other version of IGO8. If the quality is OK, so
2. The problem is with bmp files - I have resized them in order to fit the screen resolution - no other chance. This can't be fixed
About 240_240 original resolution - as you can see on the link bellow http://www.navngo.com/pages/global/eng/igo_8_supported_devices it isn't supported. I am sure for myself that it will not be - the problem is that 240_240 screen is too small for all original features of IGO8. That why I tried to make it by myself and this is the rezult. I'm continuing to work on it, and I hope I will manage to fix all the stuff but who knows

Thanks for the quick response bobby2005, unfortunately, nothing works , tried all sys.txt, tried everything, even upgraded igo8 to 8.0.0.35389, the problem isn't with the rendering because on other resolutions the image is high quality, no black lines on the buttons. What I find also very strange is that zepko's version shows the buttons clearly, and as far as I know his version is based on you first version of the 240x240 data.zip (with some modifications) (I'm also watching your posts on pocketbulgaria). Very strange. Appreciate the help.

@GlikoGliko
Tapping on Map, I get this message

Fatal error in main thread
Address:0x0021ce88
Exception:0xc0000005


I'm using WM2003SE on Qtek S110
Please, help me.
Thanks

Thanks for the quick response bobby2005, unfortunately, nothing works , tried all sys.txt, tried everything, even upgraded igo8 to 8.0.0.35389, the problem isn't with the rendering because on other resolutions the image is high quality, no black lines on the buttons. What I find also very strange is that zepko's version shows the buttons clearly, and as far as I know his version is based on you first version of the 240x240 data.zip (with some modifications) (I'm also watching your posts on pocketbulgaria). Very strange. Appreciate the help.

Well obviously the problem is with resized bmp files. In my first data.zip were resized just half of the bmps. That's why you haven't such a problem with my and zipko's files.
I am interested - do you have this problem with all menus, or just in the main one? And other can you change you background image with some one with the white colors - for example Ice Theme. PLS let me know about the rezult

Thanks for the quick response bobby2005, unfortunately, nothing works , tried all sys.txt, tried everything, even upgraded igo8 to 8.0.0.35389, the problem isn't with the rendering because on other resolutions the image is high quality, no black lines on the buttons. What I find also very strange is that zepko's version shows the buttons clearly, and as far as I know his version is based on you first version of the 240x240 data.zip (with some modifications) (I'm also watching your posts on pocketbulgaria). Very strange. Appreciate the help.

Well obviously the problem is with resized bmp files. In my first data.zip were resized just half of the bmps. That's why you haven't such a problem with my and zipko's files.
I am interested - do you have this problem with all menus, or just in the main one? And other can you change you background image with some one with the white colors - for example Ice Theme. PLS let me know about the rezult

Yes, the problem is in all the menus (the big buttons), the bottom ones are OK. Changed to a whiter background, that just changed the black lines on the buttons to white lines .

Here is the last revision of the TomTom Skin for IGO8.

- Lots of enhancements, fonts resizing and repositiong.
- Speed limit always displayed in red
- 3Dzoom and tilt controls, and right buttons repositioned in Navigation mode
- map mode (not in navigation mode) corrected
- in navigation mode, to access the trip computer, tap on the compass.

It's still in development, so it's only in 320x240.
Any suggestion is welcome



http://rapidshare.com/files/118524843/TTDev.zip.html

enjoy.

Hi Glikogliko
From Your last Skin of 29 May Line nr 185 was making trouble in my PNA,
I switched Line 184 back in operation and now your Skin is working.
This are the lines I am talking about.

184 <TEXT xxx template=xtxt template=xetNavInfoSingle combined_textmodel="$timespan:navigation.time_to_destination:5$" visiblemodel="navigation.time_to_destination.valid">

185 ;<TEXT xxx template=xtxt template=xetNavInfoSingle textmodel_time="navigation.time_to_destination" formatmodel="local.short_timeformat" visiblemodel="navigation.time_to_destination" dayperiod="1">
Suc6 S

Runs happen in portrait mode?

Fonctionne t-il en mode portrait ?

Problem with the igo8_ultra skin:

The skin doesn't work on my Tilt with the latest ATT WM6 ROM.

I placed the skin (iGo8_Ultra.zip) in a "skins" folder under the "content" folder in the SD card.

I then successfully switched the skin from within IGO.

I then received a warning that in order for the change to take effect, the application needs to restart.
I pressed "OK", but nothing happened, so I manually exited IGO and restarted.

The default sking came on, not the iGo8_Ultra.zip skin.

So I switched back to the default skin, again received the restart warning, and this time, when I pressed "OK" - it did restart IGO, and it then came back on with the default skin.

Any ideas why this isn't working for me?

Thank you.