May 30th, 2008, 7:55 am
glikogliko wrote:Here is the last revision of the TomTom Skin for IGO8.

- Lots of enhancements, fonts resizing and repositiong.
- Speed limit always displayed in red
- 3Dzoom and tilt controls, and right buttons repositioned in Navigation mode
- map mode (not in navigation mode) corrected
- in navigation mode, to access the trip computer, tap on the compass.

It's still in development, so it's only in 320x240.
Any suggestion is welcome

Image Image Image

http://rapidshare.com/files/118524843/TTDev.zip.html

enjoy.


Why I cannot see street number when using your skin? It usually shows in the lower left + right corner. Thks
May 30th, 2008, 7:55 am
May 30th, 2008, 8:58 am
b1967>>

Hi, first thanx for great skins.

Secondly I would like ask you, if you should make skin (based on semitransparent ver.). where controls will be much more transparent? Your semitransparent looks nontransparent on direct sunlight.
Is it posible to do this panels fully transparent, only with dividing lines?

Or could you tell me, what to do, to adjust transarency?

one more thanx for great skin.
May 30th, 2008, 8:58 am
May 30th, 2008, 9:18 am
boss2bossro wrote:
bobby2005 wrote:Well obviously the problem is with resized bmp files. In my first data.zip were resized just half of the bmps. That's why you haven't such a problem with my and zipko's files.
I am interested - do you have this problem with all menus, or just in the main one? And other can you change you background image with some one with the white colors - for example Ice Theme. PLS let me know about the rezult

Yes, the problem is in all the menus (the big buttons), the bottom ones are OK. Changed to a whiter background, that just changed the black lines on the buttons to white lines :).

Fixed the problem by disabling menu animation :)
May 30th, 2008, 9:18 am
May 30th, 2008, 9:52 am
pip wrote:b1967>>

Hi, first thanx for great skins.

Secondly I would like ask you, if you should make skin (based on semitransparent ver.). where controls will be much more transparent? Your semitransparent looks nontransparent on direct sunlight.
Is it posible to do this panels fully transparent, only with dividing lines?

Or could you tell me, what to do, to adjust transarency?

one more thanx for great skin.


Hi, i like them that way :) to much transparence makes the digits and text harder to see.
But it is easy to make them more transparent. Find the bmp-files in my zipfile under ui_igo8/320_240 called blackstripe...bmp. Open them in for example Gimp (freeware) and adjust the transparency of the pictures and put them back in the zipfile and there you have it! :)
May 30th, 2008, 9:52 am
May 30th, 2008, 11:38 am
Another update.

Besides the frame around the diricon i have changed speedcam warning so it will have no black background and moved it a bit.

DL:
http://uploaded.to/?id=wo3voa

Image
May 30th, 2008, 11:38 am
May 30th, 2008, 12:45 pm
b1967 wrote:Another update.

Besides the frame around the diricon i have changed speedcam warning so it will have no black background and moved it a bit.

DL:
http://uploaded.to/?id=wo3voa

Image

Can this Skin be used also in Portrait mode??
May 30th, 2008, 12:45 pm
May 30th, 2008, 12:46 pm
boss2bossro wrote:
bobby2005 wrote:
Well obviously the problem is with resized bmp files. In my first data.zip were resized just half of the bmps. That's why you haven't such a problem with my and zipko's files.
I am interested - do you have this problem with all menus, or just in the main one? And other can you change you background image with some one with the white colors - for example Ice Theme. PLS let me know about the rezult

Yes, the problem is in all the menus (the big buttons), the bottom ones are OK. Changed to a whiter background, that just changed the black lines on the buttons to white lines :).


I have HP hw6915 too and bobby2005 data.zip is working perfect in it, I dont know why you have this problem
May 30th, 2008, 12:46 pm
May 30th, 2008, 12:55 pm
dajife wrote:
boss2bossro wrote:
bobby2005 wrote:
Well obviously the problem is with resized bmp files. In my first data.zip were resized just half of the bmps. That's why you haven't such a problem with my and zipko's files.
I am interested - do you have this problem with all menus, or just in the main one? And other can you change you background image with some one with the white colors - for example Ice Theme. PLS let me know about the rezult

Yes, the problem is in all the menus (the big buttons), the bottom ones are OK. Changed to a whiter background, that just changed the black lines on the buttons to white lines :).


I have HP hw6915 too and bobby2005 data.zip is working perfect in it, I dont know why you have this problem

Hmmm....did you enabled the menu animation, because in my case that was the cause of the problem. Each time I enable menu animation tha black lines reappear.
May 30th, 2008, 12:55 pm
May 30th, 2008, 1:03 pm
boss2bossro wrote:
dajife wrote:
I have HP hw6915 too and bobby2005 data.zip is working perfect in it, I dont know why you have this problem

Hmmm....did you enabled the menu animation, because in my case that was the cause of the problem. Each time I enable menu animation tha black lines reappear.


it's true, when enabled menu animation the black lines appeared
May 30th, 2008, 1:03 pm
May 30th, 2008, 1:30 pm
@b1967

Great skin! Thank you for your hard work! I know you're looking for feedback to make your great skin even better.

I tried your skin and here following recommendations.

1. Top bar almost closes the ruler (thin black and white strip on top). Make top bar a little thinner. Ruler also looks off center.
2. Can you make top bar a little darker to match bottom bar?
3. In demo mode if you touch screen to switch to temporary 2D mode, bottom bar disappears.
4. When driving on freeway, sometimes text on bottom bar becomes truncated (ends with "..."). I think this is because you have house number text boxes on the right and left of street/freeway text box. Can you make some kind of checking there to determine if there is a no house number on the freeway and allocate more space for street/freeway text box?
5. Is there a way to add a direction switch for 2D mode (like miomap 3.3)? 2D mode always faces North, not a direction of driving.
6. Can you make TMC box (top right) visible only when TMC is enabled on the device?
May 30th, 2008, 1:30 pm
May 30th, 2008, 2:02 pm
b1967 wrote:Another update.

Besides the frame around the diricon i have changed speedcam warning so it will have no black background and moved it a bit.

DL:
http://uploaded.to/?id=wo3voa

Image


Very nice skin,but I have a problem.When Igo restart to change the skin,on the screen appears this error:

Fatal error occured in main thread.
Address:0x001851c4
Exception:0xc0000005

What is the problem?I am with Qtek 2020i (WM 2003SE).
May 30th, 2008, 2:02 pm
May 30th, 2008, 2:10 pm
sparkienl wrote:
glikogliko wrote:Here is the last revision of the TomTom Skin for IGO8.

- Lots of enhancements, fonts resizing and repositiong.
- Speed limit always displayed in red
- 3Dzoom and tilt controls, and right buttons repositioned in Navigation mode
- map mode (not in navigation mode) corrected
- in navigation mode, to access the trip computer, tap on the compass.

It's still in development, so it's only in 320x240.
Any suggestion is welcome

Image Image Image

http://rapidshare.com/files/118524843/TTDev.zip.html

enjoy.


Hi Glikogliko
From Your last Skin of 29 May Line nr 185 was making trouble in my PNA,
I switched Line 184 back in operation and now your Skin is working.
This are the lines I am talking about.

184 <TEXT xxx template=xtxt template=xetNavInfoSingle combined_textmodel="$timespan:navigation.time_to_destination:5$" visiblemodel="navigation.time_to_destination.valid">

185 ;<TEXT xxx template=xtxt template=xetNavInfoSingle textmodel_time="navigation.time_to_destination" formatmodel="local.short_timeformat" visiblemodel="navigation.time_to_destination" dayperiod="1">
Suc6 S



I thank you for your support.
I changed it and it will be included in the next upcoming release of this skin

thanks again
ciao
May 30th, 2008, 2:10 pm

Image
May 30th, 2008, 3:23 pm
Hi!

On to the next skin!

Hope you like this one, i am very satisfied my self with it! :)

DL:
http://uploaded.to/?id=b58x77

Pics:
Image Image
Image Image
May 30th, 2008, 3:23 pm
May 30th, 2008, 3:25 pm
grease wrote:@b1967

Great skin! Thank you for your hard work! I know you're looking for feedback to make your great skin even better.

I tried your skin and here following recommendations.

1. Top bar almost closes the ruler (thin black and white strip on top). Make top bar a little thinner. Ruler also looks off center.
2. Can you make top bar a little darker to match bottom bar?
3. In demo mode if you touch screen to switch to temporary 2D mode, bottom bar disappears.
4. When driving on freeway, sometimes text on bottom bar becomes truncated (ends with "..."). I think this is because you have house number text boxes on the right and left of street/freeway text box. Can you make some kind of checking there to determine if there is a no house number on the freeway and allocate more space for street/freeway text box?
5. Is there a way to add a direction switch for 2D mode (like miomap 3.3)? 2D mode always faces North, not a direction of driving.
6. Can you make TMC box (top right) visible only when TMC is enabled on the device?


Thanks for the feedback. :)
Maybe i will so something of the above. But some things require more than graphic skills and that is not for me...
May 30th, 2008, 3:25 pm
May 30th, 2008, 5:06 pm
could someone PLEASE...... tell how to get an soundwarning when there is traffic jam on the route, as it is in orginal skin, there is only a visual warning.... where the 2. maneuvre is.... but would like an soundwarning as well... PLEASE HELP......
May 30th, 2008, 5:06 pm