Jun 24th, 2010, 2:57 pm
magyarbetyar76 wrote:320x240 data.zip with junctionview

http://rapidshare.com/files/394196944/DATA.zip

tested on mypilot mp250 wince5.0 320x240


Can you please upload the data.zip for 320x240 res.
Thanks..
Jun 24th, 2010, 2:57 pm
Jun 28th, 2010, 1:31 pm
Hey guys I was woundering how can I add and view Pictures and music on Primo.
Like where do I place them ??
Jun 28th, 2010, 1:31 pm
Jun 29th, 2010, 10:45 am
I noticed that i can't make calls to POI, it shows me the number but would not dial it from there or am i missing something?
Jun 29th, 2010, 10:45 am
Jul 6th, 2010, 8:08 am
hello,
i finally got my sony nv-u73tc working with igo primo. But this is somekind of small version.
Now i need full version ( i dont need maps,voice langugage). But i need these real junction view and traffic signs.
Resolution is 400x272

Sry about my english!

Madis
Jul 6th, 2010, 8:08 am
Aug 4th, 2010, 11:54 am
Hello you there,

You who are not on holidays, maybe could you help me...
I've quite a big problem with Primo. Everything is working quite fine but suddenly, my phone (HTC Touch Pro 2) telle me that it has a lack of memory.
The only issue for me is to remove the battery (soft reset is impossible).

I can join some screen captures (but the SYS.txt is already "joined" below) which maybe will help you to help me...

Thanks in advance.

SYS.txt :
[interface]
show_minimize=1
show_exit=1
resolution_dir="800_480"
vga=0
extra_settings=1

[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="portrait"

[folders]
sdcardpath="\Carte Stockage\Primo"
content="\Carte Stockage\Primo\CONTENT"
has_secondary_root=0

[map]
speedcam_visibility=2500

[gps]
port=4
baud=57600

[traffic.settings]
detour_acceptance_mode="1"
traffic_enabled="1"

[camera.roundabout]
enabled=0

[camera.intersection_zoom]
enabled=0

[poi]
use_multi_poi_icon=0
group_poi_icons=0
max_icons_shown=30
enable_icon_fight=1
traffic_lights=1

[3d]
max_pois=20
max_pois_on_horizont=1

[3d_config]
roadsign_lines_per_screen=20
disable_roadsign_navigation_mode=0

[route.histspeed]
enabled=1
show=1
use_timeslice=1

[route.histspeed.timeslice]
day=1
hour=8
minute=1

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_exit_directions=1
announce_street_name=1
skip_exit_numbers=0

[phone]
driver="tapi"
exe_path="\windows\cprog.exe"
Win_name="phone"

[dynamiccompressor]
compressor=1
a0=56806
thrs=24703
ratio=8
gain=12

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
sound_q_length=200
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=400
hnr=1
show_hnr=1
skip_eula=1
smart_2d=1
show_oneway=1
show_oneway_3d=1
show_arrows_on_route=1
earth=1

[shutdown_time]
interface=0

[power]
powermgm_state="1"
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1
backlight_sync_with_OS=0
backlight_slow_api=0
backlight_day=100
backlight_night=50
backlight_day_battery=100
backlight_night_battery=50

[registry]
oninit1="HKLM\System\CurrentControlSet\Control\Power\Timeouts\ACSuspendTimeout:DWORD:0"
oninit2="HKLM\System\CurrentControlSet\Control\Power\Timeouts\BattSuspendTimeout:DWORD:0"
oninit3="HKCU\ControlPanel\BackLight\BatteryTimeout:DWORD:0"
oninit4="HKCU\ControlPanel\BackLight\ACTimeout:DWORD:0"
onexitreset1="HKLM\System\CurrentControlSet\Control\Power\Timeouts\ACSuspendTimeout:DWORD"
onexitreset2="HKLM\System\CurrentControlSet\Control\Power\Timeouts\BattSuspendTimeout:DWORD"
onexitreset3="HKCU\ControlPanel\BackLight\BatteryTimeout:DWORD"
onexitreset4="HKCU\ControlPanel\BackLight\ACTimeout:DWORD"
Aug 4th, 2010, 11:54 am
Aug 4th, 2010, 12:22 pm
Hey's

@FrancisB
On ne c'est pas croisé déjà qq part ? (MDR)

In your sys.txt you have something that can not function

[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="portrait" -----> portrait mode does not exist, especially not with a 800x480 data to do this you would need 480x800 resolution

As for the registry key, you do as you like (anyway it is too late) but it's completely normal that a software whatsoever to touch my registry.
If any time is needed is to do it once, with a file type *. reg

Good luck
Aug 4th, 2010, 12:22 pm
Aug 5th, 2010, 11:35 am
@Tichuiche : of course we did (mais même si trop d'info tue l'info, toute info est bonne à entendre, non ?).

If i've understood your point about portrait and landscape pb ; I haven'undertood your remark that follows about the registry key (let's meet on a French forum, as usual to understand better what you are talking about...).
Aug 5th, 2010, 11:35 am
Aug 16th, 2010, 4:29 pm
when i run my primo some error display "global_cfg" not found.! on folder conten i see a folder global_cfg was there, so may someone can help my problem. thanks and sorry about my english.
Aug 16th, 2010, 4:29 pm
Aug 26th, 2010, 5:25 pm
alguem poderia me ajudar com arquivo sys e data para HTC T5388+ tela 3.2 resolução 800x480?
Grato.
Aug 26th, 2010, 5:25 pm
Sep 16th, 2010, 3:09 pm
Isra wrote:when i run my primo some error display "global_cfg" not found.! on folder conten i see a folder global_cfg was there, so may someone can help my problem. thanks and sorry about my english.


post your sys.txt and we will have a look.
Sep 16th, 2010, 3:09 pm
Sep 17th, 2010, 7:55 am
Hello,
I just have a little question regarding the TMC with Primo... Is it possible to find the good "way" to make it work in France :mrgreen: ? I just have the scanning station without decoding the information.. :-?

PS : sorry for my english...
Sep 17th, 2010, 7:55 am
Sep 17th, 2010, 1:01 pm
lperret wrote:Hello,
I just have a little question regarding the TMC with Primo... Is it possible to find the good "way" to make it work in France :mrgreen: ? I just have the scanning station without decoding the information.. :-?

PS : sorry for my english...


If it is scanning that is good so just set you port and baud settings in sys.txt or post it here.
Sep 17th, 2010, 1:01 pm
Sep 21st, 2010, 2:39 pm
Here it is :
Code: Select all[interface]
resolution_dir="320_240"

[gps]
baud=57600
Port=7
disable_advanced=0

[tmc]
source="royaltek"
port="COM,7"
baud=38400
show_tmc=1
tmc_all_stations=1
auto_tuning=1
enable_subscription=1
announce_total_route=1
show_all_provider_list=1

[interface]
extra_settings=1

[debug]
experimental_features=1

[other]
demo_enabled=0

It is scanning, but I think I don't have the "good" licence... :oops:
What do you think ?
Thanks for your help !
L.Perret
Sep 21st, 2010, 2:39 pm
Sep 22nd, 2010, 8:51 pm
lperret wrote:Here it is :
Code: Select all[interface]
resolution_dir="320_240"

[gps]
baud=57600
Port=7
disable_advanced=0

[tmc]
source="royaltek"
port="COM,7"
baud=38400
show_tmc=1
tmc_all_stations=1
auto_tuning=1
enable_subscription=1
announce_total_route=1
show_all_provider_list=1

[interface]
extra_settings=1

[debug]
experimental_features=1

[other]
demo_enabled=0

It is scanning, but I think I don't have the "good" licence... :oops:
What do you think ?
Thanks for your help !
L.Perret


I doubt it is a license problem but what unit are u using it on PNA or PDA or phone?

also when you say scanning are the frequency numbers going up e.g. 87.05 mhz to 104 mhz ?
Sep 22nd, 2010, 8:51 pm
Oct 1st, 2010, 9:31 am
Hi,
Sorry for this late response...
I have a PDA Phone (win mobile 6.5) and the frequencies are going along the FM band (from 88 Mhz to 107 Mhz).
Just for your information, the TMC working perfectly with Igo 8.3.4 on the same PDA.
Thanks for your help !
L.PERRET
Oct 1st, 2010, 9:31 am