Oct 4th, 2010, 2:47 pm
lperret wrote:Hi,
Sorry for this late response...
I have a PDA Phone (win mobile 6.5) and the frequencies are going along the FM band (from 88 Mhz to 107 Mhz).
Just for your information, the TMC working perfectly with Igo 8.3.4 on the same PDA.
Thanks for your help !
L.PERRET


Looking at your sys.txt you have GPS and TMC on the same port suggest you check this as TMC normally on com 1.

P.S can you post your sys.txt for the IGO 8.3.4 or is the one you posted before the same?
Oct 4th, 2010, 2:47 pm
Oct 6th, 2010, 3:22 pm
I use the same sys.txt forIgo 8 and Primo.
Regarding the TMC, it is recognized correctly, but I can't have the information decoded.
I really think that it comes from a license issue...
Oct 6th, 2010, 3:22 pm
Jan 19th, 2011, 4:05 pm
please help on setup primo on htc diamond p3700
i've primo 8.5 and i don't know how to use the sys.txt to setup the current resolution.i have the 800X480 and the 480X272.
what i need to do so ican work with the program?

THX
Jan 19th, 2011, 4:05 pm
Jan 24th, 2011, 8:06 am
no one can help me on how to setup igo primo on HTC DIAMOND (not diamond 2)?
Jan 24th, 2011, 8:06 am
Feb 19th, 2011, 2:44 am
avipenina wrote:no one can help me on how to setup igo primo on HTC DIAMOND (not diamond 2)?


1- Download QVGA version from this thread --> viewtopic.php?p=710962#p710962
2- change SYS.txt like this:

rrrrrrrr wrote:WORKS ON VGA!!! (640*480 @ landscape) Tested on HTC Touch Diamond, works properly.
sys.txt:
[interface]
show_exit=1
extra_settings=1
resolution_dir="320_240"
vga=1

[rawdisplay]
highres=1
screen_x=640
screen_y=480
stretch=0


I didn't want to cross-post, but I need this information to be seen clearly because this isn't a fully VGA version, only a scaled QVGA: below I attached 2 pictures, one of iGo 8.3 which is fully VGA and last one is this iGo Primo (8.5) which is just a scaled QVGA. Just notice the power button, on the 8.3 it's fully anti-aliased while on the Primo sshot you can see it all jagged.

Guess it's not yet the time to replace 8.3 :lol:

iGo 8.3
Image



iGo 8.5 (Primo)
Image
Feb 19th, 2011, 2:44 am
Mar 9th, 2011, 6:51 am
Also need help:
I couldn't get online traffic work on my HTC Touch Pro2 (CDMA), no radio receiver but with Internet access. I never see any traffic event on my online traffic page:


Here is my sys.txt:

[device]
type="pearl_gtx60"

[sound]
csv_voice_enabled=1
tts_engine="loquendo"

[power]
backlight_status="0"

[debug]
experimental_features="1"

[interface]
extra_settings=1

[network]
available="1"

[gps]
port=4
baud=57600

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[map]
speedcam_visibility=2500

[traffic.settings]
detour_acceptance_mode="1"
traffic_enabled="1"

[poi]
use_multi_poi_icon=0
group_poi_icons=0
max_icons_shown=30
enable_icon_fight=1
traffic_lights=1
Mar 9th, 2011, 6:51 am
Mar 13th, 2011, 10:10 am
hi i am facing a problem when exiting igo primo on a wayteq x850. 2-3 secons after exit, the device soft reboots. I tried many entries in sys.txt but the problem persisted. My idea is to edit a .lua in data.zip/common/ui that will launch some exe/script that wil kill the process. But i don't know how to edit that .lua files, they dont seem to be lua scripts, instead they look like binary. I know this is possible beacuse "sk sbertaud13", some mod of primo launches ExitPrimo.exe and kills the process before it can cause the soft reset. The problem is, i dont want any modification of the ui, just a script to be run when Exit is clicked.
Mar 13th, 2011, 10:10 am
Mar 13th, 2011, 1:59 pm
i did it! Using iGoLUA i edited general.lua and added START_APLICATION("exit.mscr") on exit subroutine. exit.mscr contains Kill("Primo.exe")
Mar 13th, 2011, 1:59 pm
Mar 29th, 2011, 7:31 am
Hi, folks!

I have a couple of questions, maybe you'll help me with those:
1. When I enter a name my favorite address, how do I switch the letters to lowercase?
2. Where can I find the list of ALL the available flags and options that can be used in sys.txt?
3. I've put tutorial.zip file in content/tutorial folder, but it's not available from within the program - the Demo and Tutorial sections are empty. Why?

Thanks!
Mar 29th, 2011, 7:31 am
Apr 12th, 2011, 4:06 am
oan_raduk wrote:i did it! Using iGoLUA i edited general.lua and added START_APLICATION("exit.mscr") on exit subroutine. exit.mscr contains Kill("Primo.exe")


Hi,
Could you tell me exactly where to add it in the general.lua file
Thanks
Apr 12th, 2011, 4:06 am
May 28th, 2011, 1:27 pm
how can I show poi's like petrol stations or whatever in primo 1.1 or 1.2

in 8.3 it was a peace of cake ... could even tell which brand to show

but even after a few months of using primo I still can't find it where to show poi's

I can search them and find them but it is far more conveniënt to see if a brand X petrol station is ahead

any hints ??
May 28th, 2011, 1:27 pm
May 28th, 2011, 2:35 pm
Hello. hou can post linch for downloding IGO Primo Android?
Thanx
May 28th, 2011, 2:35 pm
May 28th, 2011, 10:57 pm
no Primo for Android only IGO My Way
May 28th, 2011, 10:57 pm

Image
UBEROID 4.0 on 42"LCD TV VIA MK802 MINI PC STICK
WM8560 8"ANDROID PAD - UBEROID v12.1_SEPT
Jun 2nd, 2011, 12:09 pm
bartvdv wrote:how can I show poi's like petrol stations or whatever in primo 1.1 or 1.2

in 8.3 it was a peace of cake ... could even tell which brand to show

but even after a few months of using primo I still can't find it where to show poi's

I can search them and find them but it is far more conveniënt to see if a brand X petrol station is ahead

any hints ??


Do you have them in userdata/poi folder?? and you saved to markers on map??
Jun 2nd, 2011, 12:09 pm