[PNA] Navigon MobileNavigator MN7.4.0 [ New SW 2310 ]

May 5th, 2009, 12:19 am
#378610 by piens
Works on a CarTrek600 (320x240 wince5 pna). I only have one problem: when I select a destination with dutch postalcode, i cannot select the housenumber any more, so it's either city, street, housenumber or postalcode (housenumber tab disabled) Is this a parameter that can be set in the settings?
May 5th, 2009, 12:19 am
May 5th, 2009, 2:19 am
#378641 by FiGhTeRsLT
helo i have pna gps 480/272 i copied file to sd_card/navigon/, then i run navigon, i give error:

application MN7.exe has performed an ilegal operation an will be shut down. If the problem persists, contact the program vendor.

program: MN7.exe
Exception: 0xC0000005
address: 0012F5D4

why?
May 5th, 2009, 2:19 am
May 5th, 2009, 5:06 am
#378675 by dominic
FiGhTeRsLT wrote:helo i have pna gps 480/272 i copied file to sd_card/navigon/, then i run navigon, i give error:

application MN7.exe has performed an ilegal operation an will be shut down. If the problem persists, contact the program vendor.

program: MN7.exe
Exception: 0xC0000005
address: 0012F5D4

why?


You're not giving much info, but one thing that comes to mind is your mobilnavigator.res file either does not support your resolution or is the wrong version- or both.

**note if you downloaded from this thread, the program resolution is for 320x240 units..
May 5th, 2009, 5:06 am
May 5th, 2009, 11:54 am
#378910 by FiGhTeRsLT
As downloaded from:
Für navigon 5110 (3100;2100,2110;5100 And similar devices mit autorunce 320*240) MN7 7.4.0 PNA
Navigon Mobile Navigator 7.4.0 for resolution 320x240
Requirements: PNA WinCE 5.0

All functions simply work to copy all on a flash card
tmc works even without the aerial

http://rapidshare.com/files/221369893/mn740.part1.rar
http://rapidshare.com/files/221370941/mn740.part2.rar

passwort: DMANN

Here only changes

http://rapidshare.com/files/221384112/Update.rar

I have changed only options and have added automatic start of the program ( autorunce ) and automatic increase in working memory...

me PNA 480x272 resolution, with Windows CE 5.0 but the figures should fit the 320x240 resolution or not?
May 5th, 2009, 11:54 am
May 5th, 2009, 3:25 pm
#379101 by FiGhTeRsLT
many thanks I am looking for any of the topics but somehow did not find them. to test this version:)
May 5th, 2009, 3:25 pm
May 5th, 2009, 3:52 pm
#379107 by DMANN
FiGhTeRsLT wrote:As downloaded from:
Für navigon 5110 (3100;2100,2110;5100 And similar devices mit autorunce 320*240) MN7 7.4.0 PNA
Navigon Mobile Navigator 7.4.0 for resolution 320x240
Requirements: PNA WinCE 5.0

All functions simply work to copy all on a flash card
tmc works even without the aerial

http://rapidshare.com/files/221369893/mn740.part1.rar
http://rapidshare.com/files/221370941/mn740.part2.rar

passwort: DMANN

Here only changes

http://rapidshare.com/files/221384112/Update.rar

I have changed only options and have added automatic start of the program ( autorunce ) and automatic increase in working memory...

me PNA 480x272 resolution, with Windows CE 5.0 but the figures should fit the 320x240 resolution or not?
May 5th, 2009, 3:52 pm

May 5th, 2009, 4:18 pm
#379115 by alien433
DMANN wrote:
FiGhTeRsLT wrote:As downloaded from:
Für navigon 5110 (3100;2100,2110;5100 And similar devices mit autorunce 320*240) MN7 7.4.0 PNA
Navigon Mobile Navigator 7.4.0 for resolution 320x240
Requirements: PNA WinCE 5.0

All functions simply work to copy all on a flash card
tmc works even without the aerial

http://rapidshare.com/files/221369893/mn740.part1.rar
http://rapidshare.com/files/221370941/mn740.part2.rar

passwort: DMANN

Here only changes

http://rapidshare.com/files/221384112/Update.rar

I have changed only options and have added automatic start of the program ( autorunce ) and automatic increase in working memory...

me PNA 480x272 resolution, with Windows CE 5.0 but the figures should fit the 320x240 resolution or not?


Does terrain also work with this? or is it still this an TMC and terrain without tmc?
May 5th, 2009, 4:18 pm
May 6th, 2009, 11:28 am
#379526 by Dexxo
@2much.
Hi.
I installed on my Navigon3110 version MN7.4, I had to change the folder in NAVIGON MN6, and the file NAVIGON.EXE in MN6.exe.
Now the law and all the GPS, when I try on the street with no destination all is well, when, instead enter a destination it should be very slow, it seems that it blocks.
May 6th, 2009, 11:28 am
May 6th, 2009, 3:16 pm
#379600 by denba
working very nice on my mio c250. It is necessary to put edited core.ini in map folder. Without that, my Mio can´t fix satelites. Where I can find croatian language files for navigon?
May 6th, 2009, 3:16 pm
May 6th, 2009, 3:17 pm
#379602 by curtis
Got it working on my Curtis GPD359 unit finally.

I took the software from the first page, then changed my paths and changed my gps settings in coreconfig.ini (no TMC fix needed). If you don't know which files, find the howto in the 7.3.1 thread. Then I took my map folder from 7.3.1 (for Canada) placing the landmarks in the map file now instead of the landmark folder and it worked. My problem before was mixing taking the new map folder and putting the old maps as it used to keep crashing when I started navigating a demo. Also you cannot mix 7.4 and 7.3 mapdrawers and things like that.

There is one caveat - on my first gps connection it crashed. I'm not sure why, but after that it worked just fine.

The addition of "my routes" is nice, but not being able to zoom in when it's showing the 3 routes is annoying as it doesn't show enough detail.

Using the skin by 2much all the fonts show correctly.

Finally, the QWERTY keyboard isn't really QWERTY as there aren't columns...unless I am missing something.

Anyway, it doesn't matter anymore as Navigon is leaving the NA playground due to TomTom and Garmin. Maybe I'll pick up an actual Navigon unit when they are severely discounted in a few months just to play with. Zellers was selling a unit for 150 CAD last week.

EDIT: yes, I also had a coreconfig.ini in my map folder.
May 6th, 2009, 3:17 pm
May 6th, 2009, 6:44 pm
#379687 by sharky75
can any one tell me if the tmc for this app. can work on loox n100???
thanks in advance
May 6th, 2009, 6:44 pm
May 7th, 2009, 1:47 am
#379838 by garfield207
Did anyone get this working for Navigon 2100T with MioPocket 2? I have tried different versions (2much's, DMANN's fix) but can't get it to work. Application launches fine but then after a couple of minutes, I get a popup info message that people have mentioned earlier in this thread (CThorDevice::ResetDevice). Initially I was getting this error message a few seconds after MN7 would start. Once I added TTS sound files, error message started popping up a little later (a couple of minutes) after application launch.

If anyone can help me get it working, I'll appreciate it very much. Thanks.
May 7th, 2009, 1:47 am
May 7th, 2009, 9:10 am
#379959 by denba
On my Mio c250 aplication working nice till driving without calculating route. When I pick some destination, then aplication freeze. Any help?
May 7th, 2009, 9:10 am