@ MaikP

You should at least tell us the browser you have, just to understand, so we could help.

I don't know, what "browser" means.
I have an HTC Trinity P3600 with cooked Win 6.1.
Navigon 7.3.1 worked also, but i got problems with my memory, so it crashed every 5 minutes.

@MaikP

PDA version 7.3.1 build 137.
this is the version that most of the PDA / Smartphone mountain without problems.

Check the memory space without starting Navigon, you've employed, below the 40% most of the programs go on the block.
If you can delete any program to free the memory test.

@ MaikP

You should at least tell us the browser you have, just to understand, so we could help.

I don't know, what "browser" means.
I have an HTC Trinity P3600 with cooked Win 6.1.
Navigon 7.3.1 worked also, but i got problems with my memory, so it crashed every 5 minutes.

@MaikP

PDA version 7.3.1 build 137.
this is the version that most of the PDA / Smartphone mountain without problems.

Check the memory space without starting Navigon, you've employed, below the 40% most of the programs go on the block.
If you can delete any program to free the memory test.

I have a Trinity P3600 with a Lalle Light WM 6.1 ROM and this works with an for PDA adapted MN 7.4.0 Version, the Software from the new Navigon 7310

@MaikP
7310 is for the PNA, you install the software for the PDA. Why change many settings.

Watch here:
viewtopic.php?f=258&t=55746

I have a Trinity P3600 with a Lalle Light WM 6.1 ROM and this works with an for PDA adapted MN 7.4.0 Version, the Software from the new Navigon 7310

I tried the 7.4.0 from this thread http://forum.ppcwarez.org/viewtopic.php?f=258&t=63554, but it doesn't start. What did you change in your version?

MobileNavigator Version 7.4 or Version 7.3.7 and US maps Q3_2008:

While this maps work perfect with PDA version MN 7.3.1 it seems that they do not work with verion 7.3.7 or version 7.4.0.

After putting in a new address or opening a previously saved route the program just quits.

Are there new maps or do I need auxiliary files to use these maps?

I have a Trinity P3600 with a Lalle Light WM 6.1 ROM and this works with an for PDA adapted MN 7.4.0 Version, the Software from the new Navigon 7310

I tried the 7.4.0 from this thread http://forum.ppcwarez.org/viewtopic.php?f=258&t=63554, but it doesn't start. What did you change in your version?

@MaikP

Why, if known, the software is for PNA.
Too, long ago, I tried MN7.4 on my omnia, but we could not make it run, I had to install (MN 7.3.1) which is for PDA:

I have a Trinity P3600 with a Lalle Light WM 6.1 ROM and this works with an for PDA adapted MN 7.4.0 Version, the Software from the new Navigon 7310

I tried the 7.4.0 from this thread http://forum.ppcwarez.org/viewtopic.php?f=258&t=63554, but it doesn't start. What did you change in your version?

You have pm

Hallo all together, hallo to DMANN,
thanks a lot for your work with this programm.
Unfortunality, it doesn´t work with my 2100max. Is there any posibility that this programm will work on my PNA?
I tried all versions and all tips, but always the message appears "Application MN7.exe has performed an illegal operation
and will be shut".
CAN ANYBODY HELP ME?????

Well, I followed your instructions and I have installed what you said on my Navigon 3110 (Sw MN7.4.0 5110 to DMANN), but we do not believe it works.
For now I only see the map where I am and there's a cape, then try to check in the street.

Thanks

3dterrainversion...
viewtopic.php?p=375132#375132

Hello,

Does anybody know how to make tmc work in a standard 2100 (non max) in USA? I´m using the "TMC" version, not the "terrain 3d", and everything works, but not the tmc.

Thans a lot in advance.

Forgot to mention that I cannot even see the TMC icon as I was able to see it with MN6.5

Hallo all together, hallo to DMANN,
thanks a lot for your work with this programm.
Unfortunality, it doesn´t work with my 2100max. Is there any posibility that this programm will work on my PNA?
I tried all versions and all tips, but always the message appears "Application MN7.exe has performed an illegal operation
and will be shut".
CAN ANYBODY HELP ME?????

Look here..
2100max resolution 480x272
viewtopic.php?p=367494#367494

Hi everibody

I'm a newguy on this forum (french guy)

First i want to congratulate All users on his forum.

I have a Loox N650 (PDA VGA) I want to use navigon 7.4 in 640*480. but i don't arrive to configure it.

Actually it's run in 320*240 but the graphic is dirty (pixel shit)....

Please help me.....

YoP SoLo

may i ask you how to solve the issue below? thanks

I'm testing this release with Q3_2008 maps; no go so far - error message says "Could not calculate route (472)..."
Can this be overcome?

EDIT: Corrected...

Worked on MioC230. Thanks