Sur mon mio C320 j' ai installer 7.3 navigon ca marche ,Tmc ne pas fonctionner icon du tmc toujours gris j'ai essaiyer tous les port et baudrate mais je n'arrive pas

hi, does this update work with the navigon 1200 does anyone know?

thanks

JAMES

Für navigon 5110 (3100;2100,2110;5100 And similar devices mit autorunce 320*240) no MAX

MN7 7.4.0 PNA Final build 789
Navigon Mobile Navigator 7.4.0 for resolution 320x240
Requirements: PNA WinCE 5.0

The program without MAP
SD ready
http://rapidshare.com/files/236422984/M ... .part1.rar
http://rapidshare.com/files/236418142/M ... .part2.rar
Pass: DMANN


Here only programs without NFS files
http://rapidshare.com/files/236464245/MN7LETZTE.rar
Pass: DMANN

All functions simply work to copy all on a flash card
tmc works

Before first start CoreConfig.ini and UserSettings. Default his TmC-Gps port and baud rate customize... Other data program write automatic (old and xml datei)

As always I have added automatic start of the program ( autorunce ) and automatic increase in working memory...

Hi Man,

is there a working version 7.4.0 build 789 for PDA in 320x240 resolution with TMC (and perhaps PanoramaView)?
I can't locate such a version neither here or at gulli. Pls give me a link, thank you.

Quel est le dernier fichier des radars ALL_POIWARNER.pom ?

J'utilise :
MN7_ALL_POIWARNER_04-2009.768ko.rar

2 much do you know if they are working on build 789 for resolution 480x272?

For 480x272 there is a different build dunno if 763 or 787.
I don't up it 'cause i cannot test it....
You can find it on Gulli....
Someone could download and after tests put here (no direct link on some other's files !)

Maps and sounds are the same of my post.

@DMann
tryed to use you version, but on my 2100 the navigon logo will freez. The animation is runnig, but never stops...
Any idea?
The older version of 763 works, but without tmc.

Greetings

@DMann
tryed to use you version, but on my 2100 the navigon logo will freez. The animation is runnig, but never stops...
Any idea?
The older version of 763 works, but without tmc.

Greetings

You have made as in the instruction ?
Before first start CoreConfig.ini and UserSettings. Default his TmC-Gps port and baud rate customize...

The software is outstanding but i have two problems.
When using the off button in the left lower corner of the display my 2110(no max) freezes as well when I’m trying to change the luminance of the display- I have to restart the device. And of course the TMC is dead.
Is it possible to bypass those problems?

Does anyone have a working version of this for U.S. Navigon 2100 units? I need everything for U.S. but the maps.

Thanks,

The software is outstanding but i have two problems.
When using the off button in the left lower corner of the display my 2110(no max) freezes as well when I’m trying to change the luminance of the display- I have to restart the device. And of course the TMC is dead.
Is it possible to bypass those problems?

Unfortunately for me is not present NAVIGON 2200 and I cannot adapt SW for all PNA!!!

Try to increase the working storage

navigon.mscr
Run("\Storage Card\NAVIGON\Memory.exe","10000")
RunWait("\Storage Card\NAVIGON\MN7.exe")

Try 9000 or 8000 I am simple I do not know how many at you the general memory...

TMC work nur
<paytmc>
<name>PremiumTMC-FR@V-Trafic2009</name>
<version>1.0.0</version>
</paytmc>
<paytmc>
<name>PremiumTMC-UK@Traffic Master2009</name>
<version>1.0.0</version>
</paytmc>
<paytmc>
<name>PremiumTMC-FIN@Destia Traffic2009</name>
<version>1.0.0</version>
</paytmc>
<paytmc>
<name>PremiumTMC-NOR@Destia Traffic2009</name>
<version>1.0.0</version>
</paytmc>
<paytmc>
<name>PremiumTMC-SWE@Destia Traffic2009</name>
<version>1.0.0</version>
And where I live in Germany...

I am sorry for my English. I from Russia ...

@DMann
tryed to use you version, but on my 2100 the navigon logo will freez. The animation is runnig, but never stops...
Any idea?
The older version of 763 works, but without tmc.

Greetings

same problem here. Old version works fine but final version freezes on loadscreen. Kinda weird, cause a lot of 21xx (no max) users saying its working for them...don´t know what to try else

Hello,

Can anybody share..the settings to work on ipaq 3xx with 800x480?
And link for the version that work?


Thanks,
Nicos

Q1.................................

Speedcams and Poi management are the biggest problem in Navigon
For my country (Italy)are enough good and updated so I can use the original ones...
Buy i agree that the adding of Pois and Speedcam is impossible and could be a reason to switch to another navigation software

Q2. [i.............[i]

At This moment I've only a PDA version so is difficult to follow exactly step by step what you are making....
But after pressing Einstellung, if you press

Optionen>Auslieferungszustand

means that you ask to the unit "Revert to default values"
After tapping for the first time

Optionen

if i recall correctly you have to press the first voice of the screen.. maybe "Allgemein"

About CThorDevice:ResetDevice and unit restarts when pressing Shutoff see post #20 about ExitBehaviourCodes in ApplicationSettings.xml and discover which ones fits better on your device...

1.POIs: Yes, I agree with you. this lack is the only reason that force users (like me) to switch to other navi-programs. Like TT7.
I am just curious if anybody has succeed to install PoiWarner on a PNA device. Did you heard any?
2.Well, I did not succeed to manage to switch the language. To be honnest I thought you are German. And now you tell me other. Respect to you for your works over a German program !
I tried again the DMANN's release, and it runs with initial screen, asking for the language of the program. So I chosed English. And - OK. So now I have to stay with this release
3. Concerning the Error Message I found here a post from a user Vadiro, and has just followed the advice. It worked for me.
BTW, I run on your and his release the maps from the previous (648) release - again described as: 09Q1 maps..

@DMANN:
I have tried your release too.
I got the same error as posted above.
Just to note I have started teh prog in manually clicking mn7.exe.
E.g. I have no idea how to use the autorunce.exe. I have put it in the Navigon folder, -nothing. On the SD root: nothing. Then I did the start manually.

If you start with MN7.exe that should increase worked memory manually!!!

What device for you?

Thank you fro reply.
The Device is: GoClever3550A. It is WinCE 5.0. I am using a Menu where I write to a .txt file (called addons) the paths to different applications I use on the device.
What could you suggest in order to increase the memory ?
I see in your release there is a Mortscrit files, but in my case (when I start the MN7.exe file manually, e.g. via the addons.txt) it seems I do not use the Mortscript functionality.