try this .dll files.try different combinations.maybe you will find the solution.i don't have mio moov 300 so for me it is dificult to find answer to your problem.
http://hpcmonex.net/izemize.htm

I have tried all day without luck with Garmin and TomTom. I have read in other posts and forums that a lot of people had trouble installing TomTom and Garmin. Maybe the core do not have all the .dlls like Mio Digiwalkwer series.
I´m using Dependency Walker to try to find all .dlls because some of them are for other processor (xScale/Thumb).
I know that some people made Garmin work on Mio Moov 300 but they did the same things as me.
I will continue because i need Gamin. There is no maps from Argentina for IGo8 or Napigator.
Thanks for the help and if you have any idea please tell me.

Hi again.
Some guys found new .dll for Mio Moov 300.it is .dll for gapi file in MioPocket try it maybe it will help.
http://rapidshare.com/files/188480058/gx.dll.html

Hello,
Can anyone help me on a China made 7" car DVD player which comes with internal GPS using CE 5.0?
It uses a dedicated SD port for GPS. The name has been confirmed is "Storage Card" and not "SDMMC".
I've tired various solutions posted with the 21 pages herein but failed.
The system only show exe files and not able to start with mscr as Mio 720 mentioned.
I've also downloaded Mio 720's files and not able to kick start Garmin (waited for >10 mins).
I don't know if I need the port spiltter but is does show up and I need to use com1 and 6 position (I am still testing this area).
Otherwise the error message is "Can't Open Port...".
Any input or suggesstions would be greatly appericated.
Thanks.

Try this trick mscr.exe out maybe its work and you get some luck with it?

Hi Mio 720,
Please repost the mscr.exe as there is no linkage.
Thanks.

Hello,
Can anyone help me on a China made 7" car DVD player which comes with internal GPS using CE 5.0?
It uses a dedicated SD port for GPS. The name has been confirmed is "Storage Card" and not "SDMMC".
I've tired various solutions posted with the 21 pages herein but failed.
The system only show exe files and not able to start with mscr as Mio 720 mentioned.
I've also downloaded Mio 720's files and not able to kick start Garmin (waited for >10 mins).
I don't know if I need the port spiltter but is does show up and I need to use com1 and 6 position (I am still testing this area).
Otherwise the error message is "Can't Open Port...".
Any input or suggesstions would be greatly appericated.
Thanks.

Try this trick mscr.exe out maybe its work and you get some luck with it?

Hi Mio 720,
Please repost the mscr.exe as there is no linkage.
Thanks.

Mate,

The trick is or was to renamed it and as i said maybe you got luck... that's all

Ok Mio 720.
I'll try that & experiment on it.
Thanks.

By the way, Car DVD Player with GPS does not show the window like what we see on a normal PDA Win CE5.0
It only have a allocated GPS SD card slot, a GPS button (on the panel & touch screen) to push.
And it depends on the setting manual which one goes to GPS section and point to the "right file" to start the process.
It only shows folders & exe files only.
No window sreen, no explorer, and all depends on telling the machine where is the exe file located and then press the GPS button to launch the GPS program.

Anyway, after 1/2 hour....
I've formatted the SD Card.
Input Mio 720's "Garmin" (Complete with all files).
Changed Garmin.mscr to Garmin.mscr.exe
Put in Base Map & Map for GarminXT MalSin V2.30 GOLD Fixed (no need unlock code).
Try it but the Car DVD Player cum GPS does not read it.

Then back to drawing board.
I later use the Garmin.exe (is a MortRunner file) in the Garmin file and the Garmin.mscr seem to be working.
As I can see the error message of " Can not open the input port".
I can see from port splitter program that it has Com 1 follow by Com 3 follow by Com 4 and last one is Com 1 again?
Plenty of Baud Rate from 110 to xxxxxxxx.
This time I changed to using com 1 & 8 position but still receive the above error message.

I think the last time I put all the exe files in the root directory and change the mscr script to look for at root dir.
And that seems to work until the port splitter only and fail to go further than that.
But this time is not working & I must have done something wrong this time.
Am I doing something wrong and not following the guidance given herein?

Would love to see it working.......any suggestions?

Hi Chongsm
Copy to which desktop? I don't have any desktop to create a shortcut to the garmin.exe. Can you advise? Thanks....

Hi Chongsm
Copy to which desktop? I don't have any desktop to create a shortcut to the garmin.exe. Can you advise? Thanks....

Reset your ipaq with celauncher.exe (check the forum for downloading) in the root of the sd card. Of course, I presume you have the Garmin on sd card as well. You should be able to access the ce windows and the explorer to locate the file in the sd card. Create shortcut just like you do so in the windows xp.

Hi again.
Some guys found new .dll for Mio Moov 300.it is .dll for gapi file in MioPocket try it maybe it will help.
http://rapidshare.com/files/188480058/gx.dll.html

Hi admuerte. I tried the Gapi driver for Mio Moov 300 but no luck with Garmin XT.
I have downloaded a TT version that works on my mio moov. So the only soft that doesn´t work is mobile xt.

[koky]

Hi again.
Some guys found new .dll for Mio Moov 300.it is .dll for gapi file in MioPocket try it maybe it will help.
http://rapidshare.com/files/188480058/gx.dll.html

Hi admuerte. I tried the Gapi driver for Mio Moov 300 but no luck with Garmin XT.
I have downloaded a TT version that works on my mio moov. So the only soft that doesn´t work is mobile xt.

Also i try dll-s from navman devices which are very similar ti moov devices, and lot of other
dll-s, versions etc..
For now garmin xt is the only sw which doesent work on moov 200.

Hi again.
Some guys found new .dll for Mio Moov 300.it is .dll for gapi file in MioPocket try it maybe it will help.
http://rapidshare.com/files/188480058/gx.dll.html

Hi admuerte. I tried the Gapi driver for Mio Moov 300 but no luck with Garmin XT.
I have downloaded a TT version that works on my mio moov. So the only soft that doesn´t work is mobile xt.

Also i try dll-s from navman devices which are very similar ti moov devices, and lot of other
dll-s, versions etc..
For now garmin xt is the only sw which doesent work on moov 200.

I have made a pack of dlls for Garmin XT and tested with Dapendency Walker without errors. A few dlls I have to converted from Thumb to ARM because I couldn´t find them on internet.
The only problem is when I run QUE.EXE I have an error:
Cannot find "QUE" (or one of its components). Make sure the path and filename are correct and that all the required libraries are available. I don´t know why but I´m still trying.

Nha-Krul
if with que.exe not working, try garmin.exe.in finding gps signal they are different

[dodger]

Garmin Mobile XT for Windows CE v5.00.10w
Working on Device MYGUIDE 3100

1: You will need a 1GB or 2GB SD Card

2: Have your Addons.text file on this SD Card,with this line
[modules]
Explorer = "","\\Windows\\Explorer.exe"

3: Now download from the internet these 2 files
(C. Ghisler & Co. Total Commander) and (JAL Port Splitter) save these 2 files to your PC

4: Set up your Microsoft ActiveSync TO YOUR PC.Now UNzip your 2 files, that you downloaded.
Run 1 at a time over the activesync to your SD card in your Device MYGUIDE 3100.
Follow on screen instructions. You Should now have 2 folders on your SD Card
(C. Ghisler & Co. Total Commander) and (JAL Port Splitter)

5: This is Garmin Mobile XT for Windows Mobile v5.00.10w cracked to work under Windows CE
Option 1:Download all in one package from one of the following mirrors:
You will only need to download this file to your PC. Then UNZIP this file.
Copy the unziped GARMIN FOLDER to your SD Card.A Card reader and writer is faster than
activesync You should now have 3 folders on your card.
(C. Ghisler & Co. Total Commander) (JAL Port Splitter) and (GARMIN)
There is one other file that came with the GARMIN XTGarmin Mobile XT for Windows CE v5.00.10w,
The KeyGen folder should be still on your PC.

6: Run the KeyGen.exe on the the top line "UNIT ID" field Enter these numbers 3619695467
Select "Garmin Mobile XT" and hit the generate button. Highlight these numbers copy and paste into NotePad.
Save NOtepad as (SW.text) file in your SD Card not in any folder on the card

7: Next Put your SD Card in your Device MYGUIDE 3100.Run Windows Explorer, then Goto folder (C. Ghisler & Co. Total Commander)
Run cecmd.exe file.You now will be able to rename (SW,text) to (SW.UNL).This is the only way I no how change the file to (*.UNL)
Now copy SW.UNL to your GARMIN FOLDER on your SD Card,

8: With the SD Card still in your Device MYGUIDE 3100 Goto the (Garmin Folder) still useing Windows Explorer.There you will find a Folder (RunGMXT)
Enter this folder you will see a file (Garmin.mscr) file. Run this file double click with styless,and wait a few seconds
You will have error messages click O.K to each error,and wait for Garmin to BOOT UP.Dont MESS around with the Port Spliter that came with the software.
If GARMIN boots to a Window with 3 messages, one that says enter ID CODE,Then you got it wrong. RUN No.6:again
If GARMIN boots into I AGRGEE screen click O.K and your up and runing.(You will not have GPS yet)

9: (EXIT GARMIN).Run Windows Explorer goto folder(JAL Port Splitter),you find 2 files ON THE SD Card.RUN PORT SPLITTER file,The file will open to
a small screen on your Device MYGUIDE 3100, Click with your styless left side botom window you will see a list of COMPORTS = COM 0/ COM 1/ COM3 ect
Highlight and click ADD Port. 1 at a time you should add 3 ports all low one COM 0/ COM 1/ COM3 will be O.K
Then goto Top window click on COM port 7 then add BAUDRATE of 38000 or nearest.Then click START Button.Last Click O.K top right the window will close

10: Take Sd Card out of Device MYGUIDE 3100 and place in your Card reader and writer, Alter your Addons.text file on this SD Card,with this extra line
[modules]
Explorer = "","\\Windows\\Explorer.exe"
Garmin XT = "","\\Storage Card\\Garmin\\Apps\\WM\\Que.exe"
Save file back to SD Card

11: Put SD Card back into Device MYGUIDE 3100. You should now see Garmin Icon on the Front Screen of Device MYGUIDE 3100. Click Garmin Icon
GARMIN will now boot up and you will have GPS.
If you ever need to do a soft reset you will have to Reload (JAL Port Splitter) over the activesync and RUN No.9:again

12: (Maps) You will have noticed that you only have a basemap on the Garmin.Now we can add a U.K and ireland map
Goto Garmin Mobile XT Europemap v9.0 download the U.K and ireland map save to PC.UNZIP file.
GOTO Run the KeyGen.exe on the the top line "UNIT ID" field Enter these numbers 3619695467.Select "Garmin Mobile XT"
On the Map Product select (CUSTOM MAPSET) a small window will pop up ENTER 197 under MAPID and hit O.K
Highlight these numbers copy and paste into NotePad.
Save NOtepad as (GMAPSUPP.text) file in your SD Card not in any folder on the card
Next Put your SD Card in your Device MYGUIDE 3100.Run Windows Explorer, then Goto folder (C. Ghisler & Co. Total Commander)
Run cecmd.exe file.You now will be able to rename (GMAPSUPP.text) to (GMAPSUPP.UNL).This is the only way I no how change the file to (*.UNL)
Now copy GMAPSUPP.UNL to your GARMIN FOLDER on your SD Card,
Copy the UNzIPED MAP GMAPSUPP.IMG file from your PC to the GARMIN Folder on the SD CARD
If GARMIN boots to a Window with 3 messages, one that says enter ID CODE,Then you got it wrong. RUN No.12:again
If GARMIN boots into I AGRGEE screen click O.K and your up and runing.You will have GPS and MAPS
Good Luck !!! to you all Working on Device MYGUIDE 3100


Working on my Device MYGUIDE 3100, Garmin Mobile XT/TomTom 7/iGO v8.3.2

Hi again.
Some guys found new .dll for Mio Moov 300.it is .dll for gapi file in MioPocket try it maybe it will help.
http://rapidshare.com/files/188480058/gx.dll.html

Hi admuerte. I tried the Gapi driver for Mio Moov 300 but no luck with Garmin XT.
I have downloaded a TT version that works on my mio moov. So the only soft that doesn´t work is mobile xt.[/quote]

Also i try dll-s from navman devices which are very similar ti moov devices, and lot of other
dll-s, versions etc..
For now garmin xt is the only sw which doesent work on moov 200.[/quote]

I have made a pack of dlls for Garmin XT and tested with Dapendency Walker without errors. A few dlls I have to converted from Thumb to ARM because I couldn´t find them on internet.
The only problem is when I run QUE.EXE I have an error:
Cannot find "QUE" (or one of its components). Make sure the path and filename are correct and that all the required libraries are available. I don´t know why but I´m still trying.[/quote]

@Nha-Krul
As moov200 owner i really understand your furstration for getting garmin to work.I have also tried without results...but we will keep going!
In the meantime can you provide me a working version of TT7?If you want DEST7 please ask me.
Can you also upload your sd content to try garmin in my moov?
thanks
dimirass

@Nha-Krul
As moov200 owner i really understand your furstration for getting garmin to work.I have also tried without results...but we will keep going!
In the meantime can you provide me a working version of TT7?If you want DEST7 please ask me.
Can you also upload your sd content to try garmin in my moov?
thanks
dimirass

Hi dimirass. I have uploaded my TT version that is working with my Mio Moov and WM folder of Garmin XT. In the file you will see WM and WM1. WM has the files that don´t show any error when you run que.exe. And in WM1 you will find my files. The .dlls are hexedited to allways call COREDL2.DLL and AYGSHEL2.DLL. If you test them with Dependency Walker you will have no error. There are all the functions and files that que.exe needs.
Anyone knows if there is a software for WinCE to see what files are open when you run an .exe file.
I use Process Monitor and Process explorer from Sysinternal in Windows XP (very usefull tools to remove rear virus) and I´m looking for something similar for WinCE
Good luck with the files!!
http://www.megaupload.com/es/?d=M1P33N91
http://www.megaupload.com/es/?d=186S2KO3

Does anyone have the patch to fix this bug? The map is not centered on my mio c520 480x272 screen.

Hope can fix this bug~!!

Any hints at least which file we need to look into? I know the buttons at the bottom were fixed by altering the xxx240.dll, could this one be due to the xxx480.dll?

Thanks...the graphics are crude and pretty lame anyways, we don't need this extra aggravation

@Nha-Krul
As moov200 owner i really understand your furstration for getting garmin to work.I have also tried without results...but we will keep going!
In the meantime can you provide me a working version of TT7?If you want DEST7 please ask me.
Can you also upload your sd content to try garmin in my moov?
thanks
dimirass

Hi dimirass. I have uploaded my TT version that is working with my Mio Moov and WM folder of Garmin XT. In the file you will see WM and WM1. WM has the files that don´t show any error when you run que.exe. And in WM1 you will find my files. The .dlls are hexedited to allways call COREDL2.DLL and AYGSHEL2.DLL. If you test them with Dependency Walker you will have no error. There are all the functions and files that que.exe needs.
Anyone knows if there is a software for WinCE to see what files are open when you run an .exe file.
I use Process Monitor and Process explorer from Sysinternal in Windows XP (very usefull tools to remove rear virus) and I´m looking for something similar for WinCE
Good luck with the files!!
http://www.megaupload.com/es/?d=M1P33N91
http://www.megaupload.com/es/?d=186S2KO3

THANKS Nha-Krul
Garmin still refuses to start ,after tapping garmin.exe or garmin.mscr(which one is the right one?)portsplitter1.11 opens for an instance ,then closes.Que.exe doesn't respond.
thanks again,
dimirass