Garmin Mobile XT forWindowsMobile V41040w

Nov 30th, 2007, 9:21 pm
#180131 by Zebra
tabarda wrote:I have a HTC P3300 and not find the GPS signal, someone knows what I would do?

Thanks already


Did it reconize the internal GPS ?
Then, If this is the case... It seems strange for me
Nov 30th, 2007, 9:21 pm
Nov 30th, 2007, 9:48 pm
#180146 by yangers
Have anyone this software working with a external GPS (in my case HOLUX M1000) that is not a Garmin one?

I tried using Franson GPS gateway and GPSProxy and there is no way I can have this working. He never recognize my receiver.
Nov 30th, 2007, 9:48 pm
Nov 30th, 2007, 10:22 pm
#180163 by V12
yangers wrote:Have anyone this software working with a external GPS (in my case HOLUX M1000) that is not a Garmin one?

I tried using Franson GPS gateway and GPSProxy and there is no way I can have this working. He never recognize my receiver.


If You are using Franson GPSGate, don't use Virtual COM port with Garmin emulator, use instead only Virtual COM port. There are another solutions - use notfaker's crack or JetMouse keygen
I have old good HP2210 and CF Navilock GPS. Cracked GMXT doesn't recognize my Navilock, I must use Franson GPSGate configured for input on COM7 and output on Virtual COM8. At first start GPSGate I need remove standard Bluetooth on COM8 (via Edit button in GPSGate) for working Franson Virtual COM8.
Nov 30th, 2007, 10:22 pm
Nov 30th, 2007, 10:23 pm
#180164 by Press
yangers wrote:Have anyone this software working with a external GPS (in my case HOLUX M1000) that is not a Garmin one?

I tried using Franson GPS gateway and GPSProxy and there is no way I can have this working. He never recognize my receiver.

As stated by johan, GPSGate Forum Admin, in this post, there's no way to make Franson GPS Gate working with Garmin Mobile XT; only with Garmin Que.
Garmin Mobile XT does not currently support GpsGate, please ask Garmin to get a real ... :-)

Or, GpsGate does not support Garmin XT, there is currently no release date or specific plabns to include such support.



Regards,
Johan

Franson Support


Regardin Garmin Mobile XT with the JetMouse Keygen, I have personally tested it - until now - with:

HTC Touch Dual (WM6, external SirfStar III Bluetooth GPS, a chinese one, son of nobody) -> WORK;
HTC P3600 (WM5, GPS Embedded) -> WORK;
Mio A201 (WM5, GPS Embedded) -> WORK;
qTek 2020i (WM2003SE, external SirfStar III Bluetooth GPS, a chinese one, same son of nobody) -> WORK;
i-mate JasJar (WM5, external SirfStar III Bluetooth GPS, a chinese one, same son of nobody) - WORK;
Sony-Ericsson P990i (Symbian v9.1 UIQ v3, external SirfStar III Bluetooth GPS, a chinese one, same son of nobody) -> WORK.

Moreover, as an owner of a Garmin GPS10 Bluetooth external antenna, I've tried to unlock only the maps (without using the SFW.UNL but only the GPSMAPSPP.UNL) and STILL WORKS!

So, I think that there are no problem at all... :D

Hi all from Italy
Nov 30th, 2007, 10:23 pm

"...for all will change, deceive or crumble; the game of the soul is never to find. The game of the soul is to follow!"
Dec 1st, 2007, 5:06 am
#180299 by wonderlander
michelinman wrote:
wonderlander wrote:can anyone share singapore map that is searchable? i tried the malsing v2.13 and it not searchable.

Did you try search by using the "spell name" way?
...........Where to.......Food,Hotels........Spell name...
Works for me using this method to search in the malsing maps.



yes it works on search by hotel etc, but is there available to be able to search for address
Dec 1st, 2007, 5:06 am

Dec 1st, 2007, 6:32 pm
#180556 by socketset
I have a Holux GPSlim 236 working without GPS Gate. I use the internal GPS program port from within my settings on my HTC Herms running WM6. I have the Holux set to com port 2 and the program port set to com3. from with XT i set serial connection select com3 and it works fine. The last thing i need is another program running.
ImageImageImage
Dec 1st, 2007, 6:32 pm

HTC Fuze (Raphael) HTC Fuze NRG 8/11 6.5
Dec 2nd, 2007, 4:01 pm
#181079 by lucy
hi, how to install Garmin MobileXT on unlocked pna such as Navman n20 Windows CE 5.0 core?

thank you for some thought on it
Dec 2nd, 2007, 4:01 pm
Dec 2nd, 2007, 7:27 pm
#181196 by borice
What is the latest North America map to use with an AXIM x51v?

I have the following:
- City Navigator North America v8
- City Navigator North America NT v8
- Metroguide North America v7 with MetroGold
- TOPO US 2008

Of all, only the Metroguide one seems to be routable.
So what's the best one to use? Can the others, when transfered to the PDA from MapSource, be made routable?

Thanks.
Dec 2nd, 2007, 7:27 pm
Dec 3rd, 2007, 2:14 am
#181384 by mazkot



Is the CN North america NT 2008 the full program or just the upgrade disk?
Dec 3rd, 2007, 2:14 am
Dec 3rd, 2007, 4:16 am
#181422 by yangers
socketset wrote:I have a Holux GPSlim 236 working without GPS Gate. I use the internal GPS program port from within my settings on my HTC Herms running WM6. I have the Holux set to com port 2 and the program port set to com3. from with XT i set serial connection select com3 and it works fine. The last thing i need is another program running.
ImageImageImage



Thanks for this, with your help finally I have it working........ :thankyou:
Dec 3rd, 2007, 4:16 am
Dec 4th, 2007, 1:53 pm
#182283 by midnight
Hi there. My situation is as follow:
I always get positional error about 200m of my real position. here is the whole situation:

My PDA is : I-mate Jamin
Bluetooth reviever is : Globalsat BT338
I installed garmin Mobile XT Ver. 4.10.40wp and it's working fine but when navigate the position is wrong. I'm away of my real position about 150 - 200 meter as mentioned above. I don't know why ?!!!!
I'm in China and I use beijing map the I got from here.

http://rapidshare.com/files/73985589/China_CN6_EN.part1.rar
http://rapidshare.com/files/73990621/China_CN6_EN.part2.rar

the both links are found here:
http://www.pda4x.com/read.php?tid=56398&page=e&#a

Thank you
PleaSE JUST REPLY. we are students here in China and we need every yuan=Chinese currency
Dec 4th, 2007, 1:53 pm
Dec 4th, 2007, 8:36 pm
#182530 by uran235
Hello,
after starting garmin it starts searching for extern bluetooth device (Garming-GPS-Device) which I donT have. I have intern GPS Receiver. There seems to be no way to change the preferences. What can I do?
Dec 4th, 2007, 8:36 pm

WVGA - 800x480
WQVGA - 400x240
VGA - 640x480
QVGA - 320x240
Dec 4th, 2007, 9:01 pm
#182555 by zsotie
uran235 wrote:Hello,
after starting garmin it starts searching for extern bluetooth device (Garming-GPS-Device) which I donT have. I have intern GPS Receiver. There seems to be no way to change the preferences. What can I do?


Me too.
I haven't any idea. I do everything more times, but not working.
Dec 4th, 2007, 9:01 pm
Dec 5th, 2007, 2:01 pm
#183017 by Stephan
kankahainen wrote:"Does this unlock all Gamin map data??"
This might be confusing for many. I try to explain in my bad english:
Garmin (routable) maps are locked "twice". First you need a long (I think 25 chars) code, to be able to register the map and to be able to view it in Map Source. This code you still need. (This is easy, internet is full of Garmin Maps with codes). Before Notfakers great work, the other step did not work: When you register the Map with Garmin, you´ll receive a new code, which is tied to your device-id. This means, that Your licence opens the map for specific Garmin device (such as Nuvi, GPS 10 or whatever) with its serial-number. When the map is uploaded from PC to the device and you start GMXT, a software-routine checks, that the licence number mactches this specific Garmin device. With Garmin Que 2.xxx this issue was solved with GPSProxy or GPSGate (additional applications). Those applications can simulate a specific device (device-ID), and with right device ID, you can use those routable maps.
.


You are right about the two steps protection Garmin used until now - by map unlocking code and device ID. But I'm not sure that the function of GPSProxy and GPSGate was to solve the second protection. These applications only convert "on the fly" the NMEA signal of whatever GPS receiver to the specific Garmin protocol as Garmin Que recognises only Garmin GPS receivers.
As far as I know, the protection of the img file is not overpassed.

An elegant way to overcome the problem was to use MetroGuide maps instead of CityNavigator. Normally, CityNavigator releases are the only fully routable maps of Garmin (an by consequence locked twice). MetroGuide doesn't allow to create routable map for handheld devices (the created GMAPSUPP.IMG file has the routing instructions disabled) but it is protected only with the first type of protection - the 25 digits unlocking code. However people found how to force MetroGuide generates routable img files, using a patch. But it is another story.

Stephan
Dec 5th, 2007, 2:01 pm
Dec 5th, 2007, 4:51 pm
#183136 by Gaylord Tinkledink
uran235 wrote:Hello,
after starting garmin it starts searching for extern bluetooth device (Garming-GPS-Device) which I donT have. I have intern GPS Receiver. There seems to be no way to change the preferences. What can I do?


zsotie wrote:
uran235 wrote:Hello,
after starting garmin it starts searching for extern bluetooth device (Garming-GPS-Device) which I donT have. I have intern GPS Receiver. There seems to be no way to change the preferences. What can I do?


Me too.
I haven't any idea. I do everything more times, but not working.



So, does anyone use GAMRIN with an intern GPS Receiver? And if yes, how can I do it? It keeps searching for bluetooth, also!!
Dec 5th, 2007, 4:51 pm