ggeorg wrote:You can use three maps, with the names
gmapprom, gmapsupp. gmapsup2
This is what I found on another board. It says only one map can be used on the card.
Unfortunately I can't test this because I myself don't have a GPS device.
* Note that this guide was written specifically for the nuvi 7x0/7x5 series but may also work on other nuvi units as well as other non-nuvi units such as the Colorado, Oregon and other Garmin hand-helds that have a disk-based file system.
You can have various mapsets loaded on your nuvi...not just the basemap and detail map. These mapsets all reside in the x:/Garmin folder on both the nuvi drive and the SD Card drive. The nuvi 7x0 can access up to six different mapsets (*one* on the SD Card). The nuvi 7x5 can access up to nine different mapsets (*one* on the SD Card)
Example:
Mapset 1. City Navigator North America NT 2009 = nuvi drive main detail mapset (gmapprom.img)
Mapset 2. City Navigator Mexico NT 2008 = nuvi drive OEM detailed mapset (gmapoem.img)
Mapset 3. US Topo 2008 = nuvi drive supplemental detailed mapset (gmapsupp.img)
Mapset 4. City Navigator Europe NT 2009 = SD Card drive supplemental mapset (gmapsupp.img)
Mapset 5. nuvi drive Basemap (gmapbmap.img)
*Note: Before fiddling with mapsets, make a backup of them first, especially gmapprom.img as this is your main detailed mapset.
Here's a list of the nuvi 7x0 & 7x5's mapset names & their relationship with the nuvi
drive/SD Card:
Nuvi map naming convention
------------------------------------
1. gmapprom.img: (7x0/7x5) nuvi drive only, (primary mapset)
2. gmapprom1.img: (7x0/7x5) nuvi drive only (secondary mapset) example: North American / European units
3. gmapsupp.img: (7x0/7x5) nuvi drive (supplemental mapset)
4. gmapsupp.img: (7x0/7x5) nuvi SD Card drive (supplemental mapset)
5. gmapoem.img: (7x0/7x5) nuvi drive only (OEM mapset), user accessible, cannot be unselected from the unit via Tools/Settings/Map/Map Info
*Note, when using the following default system maps as user maps, you'll naturally lose their default map attributes.
6. gmapbmap.img: (7x0/7x5) nuvi drive only (default basemap), configurable as a supplemental map; rename desired mapset to gmapbmap.img, NOT selectable and does NOT show up under installed maps (Tools/Settings/Map/Map Info) but may be visible under Tools/Settings/System/About/Basemap
7. gmaptz.img: (7x5 only) nuvi drive only (default 7x5 Timezone map), configurable as a supplemental map; rename desired mapset to gmaptz.img
8. gmap3d.img: (7x5 only) nuvi drive only (default 7x5 3D Buildings map), configurable as a supplemental map; rename desired mapset to gmap3d.img
+9. gmap3d1.img (7x5 only) nuvi drive only (secondary 7x5 3D Buildings map), configurable as a supplemental map; rename desired mapset to gmap3d1.img
Nuvi internal (diagnostic utility) OS map naming
-----------------------------------------------------------
7x0/7x5
1. PROM1 = gmapprom.img
2. PROM2 = gmapprom1.img
3. Suppmap1 = gmapsupp.img (nuvi drive only)
4. Suppmap = gmapsupp.img (SD Card drive only)
5. Dir DB = gmapoem.img
6. Basemap = gmapbmap.img
7x5 only
7. TZMap = gmaptz.img
8. 3DMap 1 = gmap3d.img
+9. 3DMap 2 = gmap3d1.img
